1. Introduction
Thank you for purchasing the BQCC 1 Din Car DVD Player. This manual provides essential information for the proper installation, operation, and maintenance of your new car stereo. Please read it thoroughly before use to ensure optimal performance and safety.
Figure 1: BQCC SWM 5017 Car DVD Player and Remote Control
Package Contents:
Figure 2: Package Contents (Main unit, remote, wiring harness, manual)
- Main Unit (Car DVD Player)
- Remote Control
- Wiring Harness
- Installation Keys
- User Manual (this document and PDF)
2. Setup and Installation
Important: Before installing the product directly into your car, please test the unit to ensure it is functioning correctly after transit.
2.1. Installation Step Description
- Separate the Iron Frame: Remove the metal mounting sleeve from the main unit.
- Insert Iron Frame: Slide the iron frame into the car's radio installation window.
- Fix Iron Frame: Secure the iron frame to the car dashboard using a screwdriver.
- Insert Main Unit: Carefully push the main unit into the iron frame until it snaps securely into place.
Figure 3: Side View
Figure 4: Opposite Side View
2.2. Rear Interface Description and Wiring
Carefully connect the wiring harness to the corresponding ports on the rear of the unit and to your vehicle's electrical system. Refer to the diagram below for correct connections.
Figure 5: Rear Interface and Wiring Diagram
Wiring Connections:
| Wire Color | Function | Connection |
|---|---|---|
| Red (ACC) | Ignition Switch +12V | Connect to vehicle's accessory power (switched +12V) |
| Black (GND) | Ground wire B- | Connect to vehicle's chassis ground |
| Blue (ANT) | Radio Antenna | Connect to power antenna or amplifier remote turn-on |
| Yellow (BATTERY) | Power Supply +12V | Connect to vehicle's constant +12V battery power |
| White / White/black striped | Front Speaker Left (+/-) | Connect to front left speaker |
| Gray / Gray/black striped | Front Speaker Right (+/-) | Connect to front right speaker |
| Green / Green/black striped | Rear Speaker Left (+/-) | Connect to rear left speaker |
| Purple / Purple/black striped | Rear Speaker Right (+/-) | Connect to rear right speaker |
Additional Rear Connections:
- Radio Antenna Input: Connect your car's radio antenna.
- Video Output -1, -2: RCA outputs for external monitors.
- Rear Right/Left Audio Output: RCA outputs for external amplifiers.
- Front Right/Left Audio Output: RCA outputs for external amplifiers.
- FUSE 10A: Integrated fuse for protection.
Wiring Notes:
- When the yellow (B+) and red (ACC) lines both receive 12V positive power, the unit will turn on normally.
- The yellow (B+) line maintains power to retain memory settings.
- Ensure that none of the 8 speaker cables are grounded, shared, or touching other lines to prevent sound distortion, no sound output, or unit overheating.
3. Operating Instructions
Figure 6: Front Panel Overview
3.1. Key Function Introduction (Front Panel)
| Button/Control | Function |
|---|---|
| Disc Eject (▲) | Click to release the disc. |
| PWR (Power) | Press once to power on. Press again to mute ON/OFF. Long press to power off. |
| MOD (Mode) | Switches between RADIO-USB-SD-AUX IN-BT. In Bluetooth mode, it ends calls. |
| BAND (B/A) | In radio state, switches bands (FM1-FM2-FM3-AM1-AM2). In Bluetooth state, it answers calls. |
| Previous Track (◀◀) | Playback: Previous track. Long press to rewind. Radio: Search backward for stations. |
| Next Track (▶▶) | Playback: Next track. Long press to fast forward. Radio: Search forward for stations. |
| VOL (Volume Knob) | Rotate to control volume. Press to cycle through settings: BASS, TREBLE, BALANCE, FADER, EQ, LOUD, AF, TA, REG. Long press to display/set clock. |
| MIC | Microphone pickup hole. |
| AUX | Front AUX input for portable players. |
| U (USB Port) | Connect external USB device for audio playback. |
| IR | Remote control infrared signal receiving window. |
| SD Card Slot | Insert Micro SD card for audio playback. Select SD mode. |
| RST (Reset) | Press to restore unit to factory defaults. |
| 1►◀ | Radio: Play preset station #1. USB/SD: Start/pause music playback. |
| 2 INT | Radio: Play preset station #2. Playback: Plays snippet of each track. Short press in Bluetooth mode to wake up voice assistant. |
| 3 RPT | Radio: Play preset station #3. Playback: Activates/deactivates Repeat mode for current track. |
| 4 RDM | Radio: Play preset station #4. Playback: Activates Random playback mode. |
| 5 -10 | Radio: Play preset station #5. Playback: Short press for -10 tracks, long press for previous folder. |
| 6 +10 | Radio: Play preset station #6. Playback: Short press for +10 tracks, long press for next folder. |
3.2. Bluetooth Instructions
Device Name: