Introduction
Thank you for choosing the Tuya Zigbee Leak Sensor (Model ZW08). This device allows you to monitor water status in real-time via a smartphone application, helping to prevent potential water damage and loss. Please read this manual carefully before use and keep it for future reference.
IMPORTANT NOTE:
- The Zigbee Version Sensor uses the Zigbee protocol and cannot be linked directly to Wi-Fi.
- This device does not support Zigbee2Mqtt.
- This device does not support other Zigbee Hubs; a Tuya Zigbee Hub is required for functionality.
What's in the Box
Upon unpacking, please ensure all the following items are present:
- 1x Zigbee Leak Sensor (Model ZW08)
- 1x 3M Adhesive Tapes Kit
- 1x English User Manual
Product Overview
The ZW08 sensor consists of a main unit and a wired probe. Key components include:
- LED Indicator: Provides status feedback.
- Probe: Detects water presence.
- Insulation Sheet: Must be removed before first use.
- Battery: CR2032 (included).
- Anti-tamper Button: Ensures secure installation.
- Reset Button: Used for pairing and resetting the device.
Setup Guide
1. Pre-installation Checklist
- Ensure you have a Tuya Zigbee gateway (hub) available for configuration.
- Your smartphone must be connected to a 2.4GHz Wi-Fi network.
- Have the correct Wi-Fi password ready.
- Your smartphone must be running Android 6.0+ or iOS 11+.
- If your Wi-Fi router has reached its device limit, consider disabling other devices or using a different Wi-Fi router.
2. App Download and Account Creation
- Scan the QR code below or search for the "Smart Life" app in Google Play Store or Apple App Store to download and install it.
- Create an account using your mobile number and authentication code within the app.
3. Connecting to the Tuya Zigbee Hub
The ZW08 sensor requires a Tuya Zigbee Hub to function. It cannot operate independently.
- Connect your mobile phone to your Wi-Fi router. In the Smart Life app, click the "+" icon in the upper right corner of the homepage or "Add Device". Select "Wireless Gateway (Zigbee)" from "Gateway Control".
- **Pairing the Sensor:**
- For "Blink Quickly" mode: Ensure the blue light is on and the red light is blinking quickly. If not, hold the reset button for approximately 5 seconds until the red indicator blinks quickly.
- For "Blink Slowly" mode: Ensure the red indicator is blinking slowly. If not, hold the reset button for approximately 5 seconds until the red indicator blinks slowly. Connect your mobile to the device's hotspot (e.g., "SmartLife-XXXX"), then return to the app interface to connect to the Wi-Fi router automatically.
- Click "+ Add subdevice" within your Tuya Zigbee Gateway interface, then select "More device reset methods" and choose "Flood Detector". Follow the on-screen steps.
- Before proceeding, remove the insulation sheet from the sensor's battery compartment. If the LED indicator is not blinking rapidly, open the back cover, hold the reset button for about 5 seconds until the indicator blinks rapidly.
- The app will automatically search for nearby devices and add the sensor successfully.
4. Installation
Once paired, choose a suitable location for the sensor. You can install it anywhere you are concerned about water leakage, such as under sinks, near washing machines, in bathrooms, or next to fish tanks.
- Clean the desired installation area with a clean, dry towel.
- Tear off the adhesive tapes from the sensor.
- Press the sensor firmly onto the surface for approximately 10 seconds to ensure a secure attachment.
Operating Instructions
Working Principle
The sensor operates by detecting the presence of water across its two probe feet. When these feet are immersed in water, the sensor triggers an alert. This alert is then sent to your smartphone via the Tuya Zigbee Hub and the Smart Life app, notifying you of potential water overflow or leakage and helping to reduce flooding risks.
Water-Level Alarm
Place the water leakage detector's probe at the desired testing location. If the probe detects a water level that is too high, it will send an alarm notification through the Smart Life App.
APP Remote Control and Monitoring
The Smart Life app allows for remote control and monitoring of your sensor. Alarm information and records are stored on the server, enabling you to check for water leaks in your home or office from anywhere using your smartphone (via Wi-Fi/3G/4G/5G). When the sensor detects a leak, it immediately pushes a message to your mobile app.
Main Functions Summary
- Push Notification: Receive instant notifications on your mobile device when water is detected.
- Alarm Alert: The system will send an alarm to you whenever water is detected, keeping you informed.
- Alarm Recording: View a history of all alarm events within the app, ensuring you don't miss any important moments.
- Device Sharing: Share access to the sensor with family members, allowing multiple users to monitor water status.
Maintenance
Battery Replacement (CR2032)
The sensor is designed for low power consumption, allowing a single CR2032 battery to last over one year (based on 20 detections per day). The device will send a "Low Voltage Reminder" notification to your app when the battery level is low, prompting you to replace it.
To replace the battery:
- Carefully open the back cover of the sensor unit.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring correct polarity.
- Close the back cover securely.
Troubleshooting
- Sensor not pairing:
- Ensure your Tuya Zigbee Hub is powered on and connected to your network.
- Verify your smartphone is connected to a 2.4GHz Wi-Fi network.
- Check if the sensor's LED indicator is blinking as required for pairing (rapidly for quick blink mode, slowly for slow blink mode). If not, hold the reset button for ~5 seconds until it blinks correctly.
- Confirm the insulation sheet has been removed from the battery compartment.
- If your Wi-Fi router has too many connected devices, try temporarily disabling some or using a different router to free up network resources.
- No notifications received:
- Check your smartphone's notification settings for the Smart Life app to ensure they are enabled.
- Verify the sensor is still connected to the Tuya Zigbee Hub in the app.
- Ensure the sensor's battery is not low. Replace if necessary.
- Test the sensor by briefly immersing the probe in water to confirm it triggers an alarm.
- False alarms:
- Ensure the sensor probe is placed on a dry, stable surface and not in an area prone to condensation or accidental splashes.
- Clean the probe contacts to remove any dirt or residue that might cause false readings.
Specifications
| Feature | Detail |
|---|---|
| Model Number | ZW08 |
| Material | ABS |
| Sensor Size (L x W x H) | 52.5 x 26.5 x 13 mm |
| Probe Cable Length | 1.0 m |
| Power Supply | DC 3V (CR2032 battery, included) |
| Battery Life | Over 1 year (based on 20 detections/day) |
| Wireless Type | Zigbee 3.0 (IEEE 802.15.4) |
| Smart Home Platform | Tuya |
| APP Support | Smart Life / Tuya Smart |
| Working Temperature | 0℃~55℃ (32℉ ~131℉) |
| Working Humidity | 20%~85% RH |
| Storage Humidity | 0%~90% RH |
| Certification | CE, FCC, RoHS |
User Tips
- Strategic Placement: Consider placing sensors in areas where water leaks are most likely to occur or could cause significant damage, such as near water heaters, washing machines, dishwashers, refrigerators with ice makers, and under sinks.
- Regular Testing: Periodically test your sensor by placing its probe in a small amount of water to ensure it is functioning correctly and sending notifications to your app.
- Battery Monitoring: Pay attention to low battery notifications from the app and replace the CR2032 battery promptly to ensure continuous protection.
- Network Stability: A stable Zigbee network is crucial. Ensure your Tuya Zigbee Hub is centrally located and has a strong connection to your Wi-Fi router.
- App Automation: Utilize the Smart Life app's automation features to create custom scenarios, such as triggering a smart valve to shut off water if a leak is detected (requires compatible smart devices).
Warranty and Support
For further assistance or detailed information, please refer to the official user manual PDF:
If you encounter any issues not covered in this manual or require technical support, please contact the seller or manufacturer directly through your purchase platform.