1. Introduction
The Tuya Smart LED Strip Light is a versatile and intelligent lighting solution designed for various applications, from TV backlighting to room accent lighting. Available in both WiFi and Zigbee versions, this LED strip offers RGBW/RGBWW color options, allowing for a wide spectrum of colors including dedicated white and warm white light. It integrates seamlessly with smart home ecosystems, supporting control via mobile APP, voice commands through Amazon Alexa and Google Assistant, and a dedicated 24-key infrared remote control.

Image: Product overview showing LED strip in a bedroom, smartphone app, USB controller, Google Home, and Amazon Echo devices. Highlights Zigbee, Tuya, and WiFi compatibility.
2. Safety Information
- Ensure the power supply voltage matches the product's requirements (5V DC).
- Do not immerse the LED strip or controller in water. This product is not waterproof.
- Avoid bending the LED strip sharply or applying excessive force, which may damage the LEDs or circuit board.
- Keep out of reach of children.
- Do not connect the LED strip to power while it is still in its reel packaging to prevent overheating.
- Always disconnect power before installation or maintenance.
3. Package Contents
- LED Strip Light (RGBW/RGBWW)
- USB Controller Cable with integrated button
- 24-Key Infrared Remote Control (for some versions)
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | coolo |
| Model Number | Tuya Zigbee USB RGBW/WW Strip |
| LED Chip Model | SMD5050 |
| LED Chip Brand | Epistar |
| LEDs Number/M | 60pcs/m |
| Luminous Flux | 249-2000 Lumens |
| Color Temperature | RGB (Full Color) |
| Voltage | 5V DC |
| Power Source | DC (USB Powered) |
| Power Consumption (W/m) | 5.76W/m |
| Average Life (hrs) | 50,000 hours |
| Waterproof | No |
| Is Smart Device | Yes |
| Certification | FCC, ROHS |
| Operating Temperature | -20°C to 60°C |
| Output Channel | 3CH/RGB, 4CH/RGBW |
| Remote Control Distance | 10 meters |
| Connection Mode | WiFi or Zigbee (depending on version) |
| Voice Control | Supports Tmall Genie, Google Assistant, Alexa, Baidu |
5. Setup
5.1 Physical Installation
- Prepare the Surface: Ensure the surface where you intend to install the LED strip is clean, dry, and smooth.
- Measure and Cut (if needed): The LED strip can be cut to your desired length. Look for the designated cut marks, usually indicated by a scissor icon or copper pads. The strip can be cut at the middle of every 2 LEDs.

Image: Diagram showing how the LED strip can be cut every 2 LEDs and highlighting the strong blue adhesive tape on the back.
- Attach the Strip: Peel off the protective backing from the blue adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, ensuring firm contact along its entire length.
5.2 Connection
- Connect the LED strip to the controller cable's output connector. Ensure the arrows or polarity markings align correctly.
- Plug the USB end of the controller cable into a 5V USB power source (e.g., TV USB port, USB wall adapter, power bank).
5.3 App Download and Registration
- Scan the QR code provided in the product packaging or search for