BioloMix SJ-023 Self-Feeding Slow Juicer

1. Safety Warnings

• Read all the instructions carefully before use.
• To protect against risk of electrical shock and permanent damage to the juicer, do not submerge the base of unit in water or other liquid.
• Close supervision is necessary when using any appliance near children.
• Unplug the juicer from plug socket when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, is dropped, or damaged. Return appliance to the nearest authorised service facility for examination, repair, electrical or mechanical adjustment.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
• Do not use outdoors.
• Do not let the cord hang over the edge of table or counter.
• Always make sure the juicer cover is clamped securely in place before the juicer is turned on. Do not open or remove the juice jug while in operation.
• Be sure to turn switch to OFF position after use. Make sure the motor stops completely before disassembling.
• Do not put your fingers or other objects into the juicer opening while it is in operation. Only push produce with the pusher.
• Always check the silicone valve lip is inserted into the bowl before use.
• Do not operate without the juice/pulp containers in place.
• Do not alter the appliance in anyway.
• Do not use the appliance for anything other than its intended purpose as described in the manual.
• The appliance should be used for a limited period of time (no longer than 20 minutes continuously).

2. Product Overview

The BioloMix SJ-023 is a self-feeding slow juicer designed for efficient and easy juicing of fruits and vegetables. It features a wide feed chute to minimize prep time and a masticating process for high juice yield and nutrient retention.

Figure 2.1: BioloMix SJ-023 Slow Juicer with accessories and fresh produce.

2.1 Components

1. Juicing Jug
2. Auger
3. Juicing Bowl with Anti Drip Tap
4. Base
5. Juice Jug
6. Pulp Jug
7. Pusher
8. Cleaning Brush
9. On/Off/Reverse Rotary Knob

Figure 2.2: Labeled diagram of the juicer's main parts.

2.2 Anti-Drip Tap

The anti-drip tap is designed to minimize mess and allow for mixing different fruit and vegetable juices directly in the juicing bowl. Once the juice bowl is full, open the tap to release the juice into the juice jug.

Open

Closed

3. Assembly

Wash all parts before first use. Incorrect assembly may cause the juicer to leak or prevent it from turning on.

1. **Check Silicone Valve Plug:** Always ensure the silicon valve plug is inserted into the bowl, especially after washing.


Figure 3.1: Ensuring the silicone valve plug is correctly inserted.

2. **Position Juicing Bowl:** Place the juicing bowl onto the base, aligning the juice and pulp spouts.


Figure 3.2: Aligning the juicing bowl with the base.

3. **Insert Auger:** Once the bowl is in position, place the auger firmly into the center of the bowl. Ensure it touches the bottom; otherwise, the juicing jug cover will not close properly.


Figure 3.3: Inserting the auger.

4. **Position Juicing Jug:** Position the juicing jug so that the triangle mark on the chute aligns with the padlock symbol. Twist the juicing bowl until it clicks into place. This action releases the safety mechanism, allowing the juicer to operate.


Figure 3.4: Locking the juicing jug into position.

5. **Place Jugs:** Place the juice and pulp jugs under their respective spouts. The juice jug includes measurements for convenience.


Figure 3.5: Placing the collection jugs.

4. Operating Instructions

4.1 How to Juice

Wash and prepare all your ingredients. Plug the power cord into a wall socket.

1. Open the lid and add fruits and vegetables into the juicing jug. Refer to the juicing tips below for recommended produce.
2. Close the lid and ensure the anti-drip tap is closed.
3. Rotate the rotary knob to the 'ON' position. The juicer will pull down and slowly masticate the ingredients.
4. If the juicer becomes stuck, rotate the knob to the 'REVERSE' position to push ingredients back up and dislodge them.
5. If juicing a mixture of hard and soft fruits, juice the hard fruit first.
6. Use the anti-drip tap to create mixed juices and prevent juice from escaping. With the tap closed, different fruits and vegetables can be juiced together. Open the tap to pour juice into the juice jug. Close it again after pouring to prevent dripping.
7. After all fruits and vegetables are extracted, switch the unit to 'OFF'.
8. After each extraction, run the juicer for an additional 30 seconds to extract any remaining pulp.

4.2 Juicing Tips

Juicer damage due to owner negligence or not following instructions will void the warranty. Juice slowly and enjoy the process!

• **Hard Fruit:** Carrots and beetroots should be juiced first when mixed with high-yield fruits like apples and pears for best results.
• **Fibrous/Tough Leafy Ingredients:** Cut fibrous ingredients (celery, kale) into small lengths before juicing and mix with high-yield fruit. If stuck, use reverse function or pusher.
• **Seeded Fruit:** For ingredients with seeds (e.g., grapes), thoroughly clean the bottom of the auger afterwards.
• **Nuts (for nut milk):** Always soak overnight before juicing.

DO NOT put the following ingredients into the juicer:

• **Ice:** Do not use ice inside the juicer. Add ice afterwards. Refrigerate fruits/vegetables before juicing for a colder result.
• **Hard Seeds:** Remove hard seeds from fruits like peaches, nectarines, apricots, plums, and mangoes before juicing.
• **Skins:** Peel skins from fruits like pineapple, melon, mango, and oranges before juicing. If you don't eat it, don't juice it!
• **Sesame Seed, Butter, Margarine:** Do not extract ingredients containing vegetable or animal oil, as this can reduce performance and permanently damage the juicer.
• **Coconut, Sugarcane, Whole Grains:** Do not extract ingredients with no water content. They will damage the juicer.

4.3 Making Nut Milk

Using almond or cashew nut milk is simple with your BioloMix juicer. Assemble the juicer and use the juice filter as you would for regular juicing.

1. Soak nuts (e.g., almonds) overnight in a bowl.
2. The next day, replace the water with fresh water.
3. Add the nuts along with the fresh water using a ladle into the juicer for delicious nut milk.

5. Maintenance and Cleaning

Regular cleaning ensures the long life of your juicer. Switch off and unplug the juicer before cleaning.

5.1 How to Disassemble

1. Turn the rotary knob to OFF and unplug the power cord.
2. Extract all remaining produce from the juicing bowl. For easier cleanup, operate the juicer for an additional 30 seconds after juicing is complete.
3. Close the anti-drip tap.
4. Remove the pulp and juice jugs.
5. Remove the juicing jug by rotating it anti-clockwise until the triangle mark aligns with the padlock symbol. Then, lift the juicing jug off.


Figure 5.1: Disassembling the juicing jug.

6. Remove the auger by lifting it from the bowl. If it is stuck, gently rotate until loose.


Figure 5.2: Removing the auger.

7. Lift the bowl from the base.


Figure 5.3: Lifting the bowl from the base.

5.2 How to Clean

Immediately clean the juicer after each use. Dried residue can make disassembly and cleaning difficult, and excess buildup can impair performance.

• Wash all parts with warm soapy water. Use the supplied cleaning brush if the mesh on the juicer jug is clogged with pulp.
• **Do not use an iron wire brush to clean.**
• If using a dishwasher, **do not wash above temperatures of 40°C.**
• When washing the bowl, remove the silicone valve from its socket to facilitate cleaning.


Figure 5.4: Removing the silicone valve.

• Clean the seal ring of the bowl by turning the bowl upside down and pushing the ring out with your thumb.


Figure 5.5: Removing the seal ring.

• When reinserting the seal ring, the small ribbed surface should face the bottom/outside of the bowl, and the flat side should be inside the bowl.
• To clean the base, never submerge it in water. Wipe it clean with a damp cloth.
• After cleaning, ensure all parts are fully dry before reassembling.

6. Troubleshooting

6.1 No Power to the Juicer

• Check if the power cord is properly plugged into a live socket.
• Ensure the drum lid and juicing bowl are correctly assembled and locked. Refer to the assembly instructions.
• If the juicer stops due to overload protection, turn it off and wait at least 10 minutes for it to cool down before restarting.

6.2 Low Juice Yield

• Different ingredients yield different amounts of juice. Fresh ingredients generally yield more juice.
• Verify the silicone valve lip is firmly inserted into the bowl to prevent leaks.
• For ingredients with low water content, soaking them in water before juicing may help.
• If juicing ingredients with small seeds, the yield may be reduced due to seed residue. Disassemble and wash the top-set between juicing if seed residue builds up.

6.3 Too Much Pulp in the Juice

• Continuous juicing of certain ingredients can result in more fine pulp. Clean the juicer jug frequently to reduce this.
• Use an external sieve to filter the juice and remove unwanted pulp.
• If the juice jug or auger are damaged and affecting performance, consider replacing the parts.


Figure 6.1: Filter mesh sizes for different pulp levels.

6.4 Drum Lid Will Not Close

• Ensure the auger is pushed completely into the strainer for proper lid closure.

6.5 Odd Noise from the Juicer

• Check if all parts are assembled correctly. Reassemble and listen for the noise.
• Do not start the juicer without ingredients or liquid inside.
• If excessive noise occurs when adding ingredients, check their size. Cut dense/stringy/hard fruits and vegetables into smaller pieces.
• Ensure the juicer is on a flat, horizontal surface.

6.6 Juice Dripping Down the Body of the Base

• If the silicone valve lip on the bottom of the juicing bowl is not correctly plugged in, juice may seep onto the base. Check and ensure the compression silicone is properly inserted before assembly.

6.7 Discoloration of Plastic Parts

• If the juicer is not cleaned immediately after use, remaining pulp can dry and make cleaning difficult, potentially affecting performance and causing discoloration.
• Ingredients rich in carotenoids (e.g., carrots, spinach) may stain plastic parts. Use mild detergent to clean stained parts.
• Do not use vegetable oil or animal fat on the juicer, as this can damage parts and affect performance.

6.8 Using for Purposes Other Than Juicing

• This juicer is designed for juicing fruits and vegetables. Do not use it for extracting vegetable oil.

7. Specifications

Figure 7.1: Key specifications and dimensions of the juicer.

8. User Tips

• The juicer operates quietly, making it suitable for use without causing disruption.
• Its easy-to-clean design, with parts that come apart easily, makes regular use more appealing.
• The 130mm wide feed chute is highly convenient for accommodating larger pieces of fruits and vegetables, significantly reducing preparation time.
• The slow masticating process is effective in producing a high yield of juice with relatively dry pulp and minimal foam.
• This juicer can also be used to make frozen sorbet from frozen fruit, offering a versatile function.
• Be mindful that a small amount of pulp or juice might be left behind inside the juicer when disassembling for cleaning.
• The juicer is constructed with BPA-free TRITAN material for health and safety.

9. Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual PDF available for download. This document contains comprehensive details regarding warranty terms, service centers, and contact information for technical assistance.

You can view the full user manual PDF here.

10. Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

This marking on the product, accessories, or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Figure 10.1: Symbol for separate collection of WEEE.