Introduction
Thank you for purchasing the AJAZZ AK680 Mechanical Keyboard. This 68-key keyboard offers versatile connectivity options including wired, 2.4G wireless, and Bluetooth, along with hot-swappable switches and vibrant lighting effects. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the best experience from your new keyboard.

Figure 1: AJAZZ AK680 68-Key Mechanical Keyboard
Video 1: AJAZZ AK680 Product Demonstration
Setup
1. Powering On/Off
Locate the power switch on the keyboard. It typically has positions for OFF, ON (Wired/2.4G), and BT (Bluetooth).
- OFF: Turns off the keyboard.
- ON: Powers on the keyboard for wired or 2.4G wireless mode.
- BT: Powers on the keyboard for Bluetooth wireless mode.
2. Battery Installation
The keyboard requires 2 AAA batteries. Open the battery compartment, insert the batteries with the correct polarity, and close the compartment.
3. Connection Modes
The AK680 supports three connection types:
3.1. Wired Connection
Connect the keyboard to your computer using the provided USB cable. Ensure the power switch is in the 'ON' position. The keyboard will automatically be recognized and ready for use.
3.2. 2.4G Wireless Connection
- Set the power switch to the 'ON' position.
- Insert the 2.4G USB receiver into an available USB port on your computer. The keyboard should automatically connect.
- Forcibly Pairing (if not automatically connected): Press and hold
Fn + Pfor three seconds. The indicator light will turn red and flash quickly, indicating the keyboard is in pairing mode. Insert the 2.4G receiver to automatically pair. The light will turn off upon successful connection.
3.3. Bluetooth Wireless Connection
- Set the power switch to the 'BT' position.
- Select Bluetooth Channel: Short press
Fn + Q,Fn + W, orFn + Eto select a Bluetooth channel (BT1, BT2, BT3). The indicator light will flash slowly, indicating it's ready to connect to a previously paired device. - Pairing Mode: To enter pairing mode, press and hold
Fn + Q(for BT1),Fn + W(for BT2), orFn + E(for BT3) for three seconds. The indicator light will turn red and flash quickly. - On your device (PC, laptop, Android), search for Bluetooth devices. The keyboard will appear as AK680 5.0-1 or AK680 5.0-2. Select it to pair.
- Once successfully paired, the indicator light will turn off, and the keyboard is ready for use.
Operating Instructions
1. Indicator Lights
- Caps Lock: Press the Caps Lock key to toggle uppercase/lowercase. The indicator light will follow the system's lighting effect.
- 2.4G/BT/Low Power: The FN key indicator light serves multiple purposes. It flashes red for low power (below 2.1V) and indicates connection status for 2.4G and Bluetooth modes.
- Win Lock: Press
Fn + Win. The Win key light will illuminate to indicate the Windows key is locked, preventing accidental presses during gaming. Press again to unlock.
2. Multimedia Key Combinations
Use the Fn key in combination with other keys to access multimedia and system functions:
| Combination | Function |
|---|---|
Fn + F1 | My Computer |
Fn + F2 | Search |
Fn + F3 | Calculator |
Fn + F4 | Media Player |
Fn + F5 | Previous Song |
Fn + F6 | Next Song |
Fn + F7 | Play/Pause |
Fn + F8 | Stop |
Fn + F9 | Mute |
Fn + F10 | Volume Down |
Fn + F11 | Volume Up |
Fn + F12 | |
Fn + \ | / ! | Light Adjustment (Backlight Mode/Brightness) |
Fn + S | Switch to Mac system mode |
Fn + A | Switch to Windows system mode |
Fn + Left Ctrl | Exchange Caps Lock and Left Ctrl functions (factory default: Caps Lock function) |
Fn + Right Ctrl | Exchange main key area and editing keys functions (factory default: main key area function) |
Fn + Alt | Exchange Alt and Win key functions |
3. Backlight Control
The AK680 features vibrant backlighting. Use Fn + \ | / ! to cycle through different lighting modes and adjust brightness. The keyboard is not full RGB customizable, but offers various rainbow backlight effects.

Figure 2: AK680 with Phantom Colored Backlight
Maintenance
1. Cleaning
To maintain optimal performance and appearance, regularly clean your keyboard. Use a soft, dry cloth to wipe down the keycaps and casing. For deeper cleaning, you can use a can of compressed air to remove dust and debris from between the keys.
2. Dust Protection
The mechanical switches are designed with shaft covers and lower covers to help keep dust away. However, regular cleaning helps prolong the lifespan of the switches and ensures consistent performance.

Figure 3: Mechanical Switch Components with Dust Protection

Figure 4: Keyboard Internal Structure with EVA Sandwich for Sound Control
Troubleshooting
- Keyboard not responding: Ensure the power switch is in the correct position (ON for wired/2.4G, BT for Bluetooth). Check battery levels and replace if necessary. For wired mode, ensure the USB cable is securely connected.
- 2.4G/Bluetooth connection issues: Try re-pairing the keyboard following the instructions in the Setup section. Ensure your device's Bluetooth is enabled and discoverable.
- Low Power State: When the battery voltage is lower than 2.1V, the FN key indicator light will flash red to prompt you to replace the batteries. If you continue to use it, the prompt will repeat.
- Keyboard not working after battery pull: Ensure new batteries are correctly installed and the power switch is in the appropriate 'ON' or 'BT' position. If still unresponsive, attempt to re-pair the keyboard.
- Backlight not working: Ensure the keyboard is powered on and not in a sleep state. Use
Fn + \ | / !to check if the backlight is simply turned off or set to a very low brightness. - Deep Sleep State: If no operation is performed for 20 minutes, the keyboard will enter a deep sleep mode to conserve power. Press any button to wake it up.
Specifications
| Feature | Description |
|---|---|
| Product Name | AJAZZ AK680 Mechanical Keyboard |
| Model | AK680 |
| Key Layout | 68 Keys |
| Connectivity | Wired (USB), 2.4G Wireless, Bluetooth (Dual Mode) |
| Switch Type | Mechanical, Hot-swappable |
| Keycap Material | ABS Injection Molding |
| Operation Style | Mechanical |
| Anti-ghosting | 19-key anti-impact |
| Battery | 2x AAA Batteries |
| Approximate Dimensions (L x W x H) | 33 cm x 13 cm x 4 cm (Based on package dimensions) |
| Weight | 0.61 kg |
| Supported OS | Windows Vista/7/10, Mac, Android |
| Application | Desktop, Laptop |
| Certification | CE, FCC |

Figure 5: Full Key Hot Swap Feature

Figure 6: ABS Exterior Frosted Keycaps
Warranty and Support
1. Product Warranty
The AJAZZ AK680 Mechanical Keyboard comes with a 1-year guarantee from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
2. Customer Support
For further information, technical assistance, or warranty claims, please visit the official AJAZZ website. You can also refer to the comprehensive user manual available in PDF format for more detailed instructions.
User Manual (PDF): A detailed user manual in PDF format is available for download. View PDF
User Tips
- The mechanical switches on this keyboard are known for their satisfying sound and smooth feel.
- The keyboard features a rainbow backlight, which is not fully customizable RGB but offers various attractive pre-set modes.
- Always ensure the power switch is set to the correct connection mode (Wired, 2.4G, or BT) for proper functionality.
- If the keyboard does not power on, double-check the battery installation and ensure the batteries are fresh.
Frequently Asked Questions (FAQ)
Q: How do I connect the keyboard?
A: The keyboard supports wired, 2.4G wireless, and Bluetooth connections. Please refer to the "Setup" section for detailed instructions on how to connect and pair your keyboard in each mode.
Q: How do I turn on or change the backlight lighting?
A: You can control the backlight using the Fn key in combination with the \ | / ! key. This allows you to cycle through different lighting modes and adjust brightness. Refer to the "Operating Instructions" section for more details.
Q: Does this keyboard have dedicated software for customization?
A: Based on the available product information, there is no dedicated software mentioned for customizing the keyboard's functions or lighting effects.