Niditon NIyw01

Contents

Niditon 3D Digital LED Alarm Clock User Manual

Model: NIyw01

Brand: Niditon

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Niditon 3D Digital LED Alarm Clock (Model: NIyw01). This versatile clock features a clear LED display for time, date, and temperature, multiple alarm settings, automatic brightness adjustment, and can be used as a desk or wall clock.

Front view of the white 3D digital LED alarm clock

Figure 1: Front view of the Niditon 3D Digital LED Alarm Clock.

Key Features:

  • LED Clock Display
  • Alternating display of Time, Date, and Temperature
  • Temperature range: 0℃-50℃ (32°F-122°F)
  • Automatic brightness adjustment (50% darker from 7 PM-6 AM)
  • Four operation buttons: SET, UP, DOWN, RESET
  • Calendar function (Year 2000.01.01 to 2099.2.31)
  • Three independent alarm settings (AL1, AL2, AL3)
  • Power: DC 5V via USB cable, 1x CR2032 battery for memory backup
  • Versatile placement: On table (with removable bracket) or On wall (with hanging hole)
Diagram highlighting key functions of the 3D digital clock

Figure 2: Visual representation of the clock's main functions.

Setup

Package Contents:

  • 1 x Niditon 3D Digital LED Alarm Clock
  • 1 x USB Power Cable
  • 1 x CR2032 Battery (for memory backup, may not be included in all packages)
  • 1 x Removable Bracket
  • 1 x User Manual (this document)

Power Connection:

  1. Insert one CR2032 button cell battery into the battery compartment at the back of the clock. This battery is for memory time backup only and does not power the display.
  2. Connect the provided USB cable to the DC 5V input port on the back of the clock.
  3. Plug the other end of the USB cable into a standard USB power adapter (not included) or a powered USB port.
  4. Upon power-on or reopening, the LED display will show the default time (2015.01.01, PM 12:00 in 12/24 Hour Format).
Back of the clock showing USB port and battery compartment

Figure 3: Rear view of the clock, indicating power input and battery slot.

Placement Options:

  • **Desk Placement**: Attach the removable bracket to the bottom of the clock for stable placement on any flat surface.
  • **Wall Mounting**: Use the hanging hole located on the back of the clock to mount it securely on a wall. Ensure the wall anchor and screw (not included) are appropriate for your wall type.
Clock showing wall mounting option with hanging hole and desk placement with removable bracket

Figure 4: Illustration of desk and wall mounting options.

Operation

Button Functions:

Product diagram with SET, UP, DOWN, RESET buttons labeled

Figure 5: Diagram of the clock's control buttons.

  • **SET Key**:
    • Under Time Mode: Press to cycle through Time, Date, Temperature, AL1, AL2, AL3 modes.
    • Long Press: Enter adjustment mode for the selected setting.
  • **UP Key**:
    • Short Press: Adjust value upwards during setting.
    • Long Press: Fast adjustment upwards.
    • Under Alarm Mode: Short press to turn Alarm ON/OFF.
    • Under Non-Alarm/Non-Clock/Non-Setting Mode: Press to choose display mode (dp-1/dp-2/dp-3).
  • **DOWN Key**:
    • Short Press: Adjust value downwards during setting.
    • Long Press: Fast adjustment downwards.
    • In normal mode: Used to open/close power saving mode (ON SD / -SD).
  • **RESET Button**: (Small button, usually recessed, requires a pin to press) Resets the clock to default settings.

Clock Function (Time Setting):

  1. In Time Display Mode, Long Press the **SET** key for 2 seconds to enter Clock Setting.
  2. The setting order is: 12/24Hr Format → Hour → Minute.
  3. Use the **UP** or **DOWN** keys to adjust the values. Long press for fast adjustment.
  4. Press **SET** to confirm each setting and move to the next.
  5. After setting the Minute, press **SET** again to save and exit.
  6. To choose between 12-hour and 24-hour format, press the **UP** key in Time Setting Mode.

Date Function:

  1. In Date Display Mode (reached by pressing **SET** in Time Mode), Long Press the **SET** key to enter Date Setting.
  2. The setting order is: Year → Month → Date.
  3. Use the **UP** or **DOWN** keys to adjust the values. Long press for fast adjustment.
  4. The Year adjustable range is 2000-2099. Beyond 2099, it loops back to 2000.
  5. Press **SET** to confirm each setting and move to the next.
  6. After setting the Date, press **SET** again to save and exit.

Alarm Function:

The clock has 3 independent alarms: AL1, AL2, AL3.

  1. In Alarm Mode (reached by pressing **SET** in Time Mode), press **UP** to select AL1, AL2, or AL3.
  2. To turn an alarm ON/OFF, short press the **UP** key when the desired alarm (e.g., AL1) is displayed.
  3. To set an alarm, Long Press the **SET** key when the desired alarm is displayed.
  4. The setting order is: Hour → Minute.
  5. Use the **UP** or **DOWN** keys to adjust the values.
  6. Press **SET** to confirm each setting and move to the next.
  7. After setting the Minute, press **SET** again to save and exit.
  8. When an alarm rings, press any key to stop it. If no key is pressed, the alarm will ring for 1 minute with a "BIBI" sound.

Display Modes Choice:

In normal mode (not in alarm or setting mode), press the **UP** key to cycle through the display modes:

  • **DP-1 Mode**: Displays Time, then Date, then Temperature, exchanging by turn. Each display lasts for 10 seconds before switching.
  • **DP-2 Mode**: Displays Time continuously. If you switch to another mode and then return, it will display that mode always.
  • **DP-3 Mode**: Displays Time continuously. If you switch to another mode, after 15 seconds of no operation, it will return to Time Display Mode.

Automatic Brightness Adjustment:

  • The clock automatically adjusts its brightness.
  • From 7:00 PM to 5:59 AM, the display will be 70% darker.
  • From 6:00 AM to 6:59 PM, the display will be at 100% brightness.

Voice Control (Power Saving Mode):

  • In normal mode, press the **DOWN** key to toggle the power saving mode.
  • "ON SD" indicates power saving mode is active. The LED display will turn off 15 seconds after no operation.
  • "-SD" indicates power saving mode is off.
  • When the sound level reaches 75 dB, the LED display will re-light for 15 seconds.
  • **Note**: The sound control mode does not function when the clock is powered solely by button batteries (CR2032). It requires USB power.

Maintenance

  • Clean the clock regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Avoid exposing the clock to extreme temperatures, direct sunlight, or high humidity.
  • Ensure the USB cable is not bent or damaged to maintain a stable power supply.
  • If the memory battery (CR2032) needs replacement, ensure the clock is powered off or unplugged before changing the battery. Dispose of old batteries responsibly.

Troubleshooting

ProblemPossible CauseSolution
Display is off or not lighting up.No power, loose USB connection, or in power saving mode.
  • Ensure the USB cable is securely connected to both the clock and a power source.
  • Check if the power adapter is working.
  • Press the **DOWN** key to exit power saving mode (if "ON SD" is displayed).
Clock settings are lost after power outage.CR2032 memory battery is dead or missing.Replace the CR2032 button cell battery.
Difficulty setting time/date/alarm.Incorrect button sequence or unfamiliarity with controls.Refer to the "Operation" section of this manual carefully. Patience is key.
Voice control feature not working.Clock is running on button battery only, or ambient sound is too low.
  • Ensure the clock is powered via the USB cable. Voice control does not work with button battery power alone.
  • Ensure ambient sound reaches 75 dB to trigger the display.
Display is too bright or too dim.Automatic brightness adjustment is active.This is a normal function. The brightness adjusts automatically based on the time of day (70% darker from 7 PM-5:59 AM, 100% bright from 6 AM-6:59 PM). There is no manual brightness control.

Specifications

FeatureDetail
Brand NameNiditon
Model NumberNIyw01
TypeAlarm Clock
MaterialPlastic
Display TypeDIGITAL (LED)
Motivity TypeDigital
FunctionTemperature Display
FormSingle Face
StyleModern Style
Dimensions (Length x Width x Height)230mm (9 inches) x 94mm x 60mm (approx.)
Weight260g (approx.)
Power SourceDC 5V (USB Cable), 1x CR2032 (Memory Backup)
Temperature Range0℃-50℃ (32°F-122°F)
Calendar RangeYear 2000.01.01 - Year 2099.2.31
Clock displaying green time with dimensions 23cm/9inch indicated

Figure 6: Clock displaying dimensions.

User Tips

  • **Continuous Display**: If you prefer the time to be displayed continuously without cycling through date and temperature, select **DP-2 Mode** (refer to "Display Modes Choice" section). This is convenient for quick time checks, especially in low light.
  • **Automatic Dimming**: The clock's automatic dimming feature (70% darker from 7 PM to 5:59 AM) is generally well-received for nighttime use, providing a softer glow.
  • **Setup Patience**: Initial setup of time and alarms can be a bit tricky. Take your time and follow the steps in the "Operation" section carefully.
  • **Power Saving**: Utilize the "ON SD" power saving mode to turn off the display after 15 seconds of inactivity, conserving energy. Remember that voice control for re-lighting the display only works when the clock is powered via USB.

Frequently Asked Questions (FAQ)

Q: Does the clock have a chronometer (stopwatch) function?
A: No, this clock does not feature a chronometer or stopwatch function. Its primary functions are time, date, temperature display, and alarm.
Q: What are the exact dimensions of the clock?
A: The clock measures approximately 230mm (9 inches) in length and 94mm in width. Please refer to the "Specifications" section for full details.

Warranty and Support

For any issues or questions not covered in this manual, please contact the seller or manufacturer's support channel. Please refer to your purchase documentation for specific warranty terms and contact information.

A digital version of this user manual is available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.