SPEEDRACING MP-1187

Contents

SPEEDRACING MP-1187 Chain Alignment Tool

User Manual

1. Product Overview

The SPEEDRACING MP-1187 Chain Alignment Tool is a quick and accurate device designed to assist in maintaining proper chain alignment on various vehicles. Made from high-quality CNC aluminum, this tool is strong, sturdy, and built for a long service life. It is available in blue and red color options.

Blue Chain Alignment Tool

Figure 1: SPEEDRACING MP-1187 Chain Alignment Tool (Blue)

Applicable Models

This tool is suitable for a wide range of vehicles, including:

  • Motorcycles (street sports, cross-country, street cruiser, street)
  • ATVs (All-terrain vehicles, utility vehicles)
  • Snowmobiles
  • Scooters
  • Private maritime vehicles
Applicable vehicle types for the chain alignment tool

Figure 2: Examples of vehicles compatible with the chain alignment tool.

2. Safety Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.
  • This product must comply with all applicable safety and regulatory requirements in the market where it is sold.

3. Setup and Installation

The chain alignment tool is designed for easy installation and use.

  1. Position the tool: Clamp the chain alignment tool directly onto the rear sprocket.
  2. Secure the tool: Tighten the screws to firmly fix the tool in place on the sprocket.
  3. Automatic alignment: The silver positioning rod will automatically align with the chain, indicating the current chain alignment.
Diagram showing how to use the chain alignment tool

Figure 3: Step-by-step guide on how to attach and use the chain alignment tool.

Chain alignment tool clamped onto a motorcycle chain and sprocket

Figure 4: The chain alignment tool in position on a motorcycle chain.

Video Demonstration

Video 1: Product demonstration showing the assembly and basic function of the chain alignment tool.

4. Operating Instructions

Once the tool is securely clamped to the rear sprocket, the silver positioning rod provides a visual guide for chain alignment. To achieve proper alignment:

  1. Ensure the tool is clamped vertically on the rear sprocket.
  2. Observe the silver positioning rod. It should run parallel to the chain.
  3. Adjust your vehicle's rear wheel as necessary until the chain runs perfectly straight along the positioning rod. This indicates correct chain alignment.

This process helps you modify or strengthen the chain more quickly and conveniently by ensuring precise alignment.

5. Maintenance

  • Cleaning: After each use, wipe the tool clean with a dry cloth to remove any grease, dirt, or debris.
  • Storage: Store the chain alignment tool in a dry place, away from direct sunlight and extreme temperatures, to prevent corrosion and material degradation.
  • Inspection: Regularly inspect the tool for any signs of wear, damage, or deformation. Ensure the screws are not stripped and the positioning rod is straight. Do not use if the tool is damaged.

6. Troubleshooting

  • Inaccurate Alignment Reading:
    • Ensure the tool is clamped securely and vertically on the rear sprocket.
    • Verify that the screws are tightened sufficiently to prevent movement.
    • Check if the positioning rod is bent or damaged. If so, replace the tool.
  • Tool Does Not Fit:
    • Confirm the tool is compatible with your sprocket size.
    • If a chain guard is present, it may need to be temporarily removed for the tool to fit properly.
  • Difficulty Tightening Screws:
    • Ensure the threads are clean and free of debris.
    • Do not overtighten, as this can strip the threads.

7. Specifications

FeatureDetail
Model NumberMP-1187
Brand NameSPEEDRACING
OriginMainland China
MaterialCNC Aluminum (6061 aluminum alloy)
Available ColorsBlue, Red
Tool Body DimensionsWidth: 4.2 cm, Height: 3.6 cm, Clamp Depth: 2.7 cm, Rod Slot Width: 3.1 cm
Positioning Rod Length18.2 cm
Package Weight0.095 kg
Package Dimensions20 cm x 9 cm x 5 cm
Diagram showing the dimensions of the chain alignment tool

Figure 5: Detailed dimensions of the chain alignment tool.

8. User Tips

  • Chain Guard Removal: For optimal use and proper fitment, you may need to temporarily remove your vehicle's chain guard before attaching the alignment tool.
  • Rod Length: While effective, some users have noted that a slightly longer positioning rod could be beneficial for certain applications.
  • Quality Assurance: Users generally find the tool to be of good quality and effective for its intended purpose.

9. Warranty and Support

Manufacturer Information

Company Name: Zhejiang xuzhong automobile parts co., ltd
Full Address: No. 666, jingye road, economic development zone, rui'an city, wenzhou city, zhejiang province
Email: xz2014express@163.com
Telephone: 86-15888266370

EU Authorized Representative

AR Company Name: SUCCESS COURIER SL
Full Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Email: successservice2@hotmail.com
Telephone: 34-910602659

For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or the EU authorized representative using the provided contact information.

© 2024 SPEEDRACING. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.