Introduction
Thank you for choosing the Arikasen G2 Open-Ear Bluetooth Headset. This manual provides essential information for setting up, operating, and maintaining your new headset. Please read it carefully to ensure optimal performance and longevity of your device.
The Arikasen G2 features an open-ear design for safety and hygiene, Bluetooth 5.2 for stable connections, a 270° rotatable noise-cancelling boom microphone for clear communication, and a long-lasting battery, making it ideal for office use, remote work, and active lifestyles.
Figure 1: Arikasen G2 Open-Ear Bluetooth Headset
Package Contents
Please check the package for the following items:
- Arikasen G2 Open-Ear Bluetooth Headset
- User Manual
- Charging Cable (Type-C)
Setup
1. Charging the Headset
Before first use, ensure the headset is fully charged. Connect the provided Type-C charging cable to the charging port on the headset and the other end to a USB power source (e.g., computer, wall adapter). The charging indicator light will typically be red during charging and turn blue or off when fully charged.
- Charging Time: Approximately 1.5 hours for a full charge.
- Battery Life: Up to 10 hours of music/calls, 200 hours standby.
Figure 2: Battery Endurance and Charging Time
2. Powering On/Off
- Power On: Press and hold the multi-function button until you hear a power-on prompt or see the indicator light flash.
- Power Off: Press and hold the multi-function button until you hear a power-off prompt or the indicator light turns off.
3. Bluetooth Pairing
To connect your headset to a device (e.g., smartphone, laptop):
- Ensure the headset is powered off.
- Press and hold the multi-function button for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating it is in pairing mode.
- On your device, enable Bluetooth and search for available devices.
- Select "G2" (or similar name) from the list of found devices.
- Once connected, you will hear a confirmation prompt, and the indicator light will typically flash blue slowly.
The headset supports dual connection, allowing it to be paired with two Bluetooth devices simultaneously. After pairing with the first device, disable Bluetooth on the first device, put the headset back into pairing mode, and connect to the second device. Then re-enable Bluetooth on the first device, and the headset should connect to both.
Figure 3: Bluetooth 5.2 and Dual Connection Capability
Operation
1. Basic Controls
The headset features control buttons for various functions:
- Play/Pause: Press the multi-function button once.
- Answer/End Call: Press the multi-function button once.
- Reject Call: Press and hold the multi-function button for 2 seconds.
- Volume Up/Down: Use the dedicated volume buttons (+/-).
- Next Track: Press and hold the Volume Up (+) button.
- Previous Track: Press and hold the Volume Down (-) button.
- Activate Voice Assistant: Double-press the multi-function button (supports Amazon Alexa, Apple Siri, Google Assistant).
2. Microphone Usage
The G2 headset is equipped with a 270° rotatable noise-cancelling boom microphone for clear conversations. Adjust the microphone position for optimal voice pickup.
- Mute/Unmute: Some models may feature a dedicated mute button or mute automatically when the boom mic is swiveled upwards. Refer to the specific button layout on your device.
Figure 4: Adjustable 270° Noise Cancelling Boom Microphone
3. Open-Ear Design Benefits
The open-ear air conduction design allows you to hear your surroundings while enjoying audio, enhancing safety in various environments. It also prevents discomfort and promotes hygiene by not blocking the ear canal.
Figure 5: Open Ear Safety and Comfort
Figure 6: Air Conduction for Comfort, Hygiene, and Secure Fit
Maintenance
- Cleaning: Wipe the headset with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Resistance: The headset is not waterproof. Avoid exposure to water or excessive moisture.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headset regularly, even if not in use for extended periods.
Troubleshooting
- Headset won't power on:
- Ensure the headset is fully charged. Connect it to a power source and try again after a few minutes.
- Unable to pair with device:
- Make sure the headset is in pairing mode (indicator light flashing red and blue). Ensure Bluetooth is enabled on your device and it's within range. Try restarting both the headset and your device.
- No sound or poor audio quality:
- Check the volume levels on both the headset and your connected device. Ensure the headset is properly connected. Try disconnecting and re-pairing the headset. Verify that the correct audio output device is selected on your computer/phone.
- Microphone not working:
- Ensure the microphone boom is positioned correctly. Check microphone settings on your connected device to ensure the headset is selected as the input device. If applicable, ensure the microphone is not muted.
- Can I use the headset while charging?
- While technically possible, it is generally not recommended for optimal battery health and performance. It is best to fully charge the headset before use.
- Does the headset have low latency or support aptX-LL?
- The headset utilizes Bluetooth 5.2 technology and supports AAC and SBC codecs. Low latency performance is typical for Bluetooth 5.2, but aptX-LL is not explicitly supported.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | arikasen |
| Model | G2 |
| Material | Plastic |
| Style | Neckband, Open-Ear |
| Communication | Wireless (Bluetooth) |
| Bluetooth Version | 5.2 |
| Wireless Range | 10m-20m |
| Battery Capacity | 165 mAh |
| Battery Life (Music/Calls) | 8-10 hours |
| Standby Time | 200 hours |
| Charging Time | 1.5 hours |
| Charging Method | Cable (Type-C) |
| Microphone | Yes, Boom Microphone (270° rotatable, Noise Cancelling) |
| Voice Assistant | Yes (Amazon Alexa, Apple Siri, Google Assistant Support) |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Driver Diameter | 12 mm |
| Frequency Response Range | 20 - 20000 Hz |
| Sensitivity | 100 dB |
| Impedance Range | up to 32 Ω |
| Codecs | AAC, SBC |
| Waterproof | No |
| Certification | CE, FCC |
User Tips
Based on user feedback, here are some tips for getting the most out of your Arikasen G2 headset:
- Optimal for Calls and Office Work: The headset is highly suitable for remote work and phone calls, providing clear voice communication.
- Comfortable and Secure Fit: The lightweight, open-ear design ensures a comfortable and secure fit, even during extended wear or active use.
- Easy Setup: Users appreciate the straightforward and quick setup process.
- Good Wireless Range: Expect a reliable wireless range of several meters for speaking and up to 10 meters for listening.
- Tactile Buttons: The mechanical control buttons are responsive and easy to operate.
Warranty and Support
For warranty information and customer support, please refer to the seller or manufacturer's official website. Keep your purchase receipt as proof of purchase.
A PDF version of this user manual may be available for download from the product page or manufacturer's support section. (Reference: User manual (PDF))