Lemorele P20C

Contents

Lemorele Wireless HDMI Transmitter and Receiver User Manual

Model: P20C

1. Introduction

Thank you for choosing the Lemorele Wireless HDMI Transmitter and Receiver. This device allows you to wirelessly transmit high-definition video and audio signals (up to 1080P at 60Hz) over distances of up to 50 meters (164 feet) in open spaces. It is ideal for presentations, home entertainment, and extending your display without the need for long HDMI cables. Enjoy smooth, stable, and clear transmission with low latency.

Lemorele Wireless HDMI Transmitter and Receiver units

Image: Lemorele Wireless HDMI Transmitter (TX) and Receiver (RX) units, highlighting smooth, stable, clear transmission up to 50 meters.

2. Safety Information

  • Do not expose the product to high humidity environments (such as bathrooms) to avoid water damage.
  • Ensure the power supply is 5V=2A. Using an incorrect power adapter may damage the device.
  • Keep the device away from heat sources and direct sunlight.
  • Do not attempt to disassemble or repair the device yourself. Contact support for assistance.
  • Use only the provided cables and accessories.

3. Package Contents

Please check the package contents upon opening. If any items are missing or damaged, contact your retailer.

  • 1 x Wireless HDMI Transmitter (TX)
  • 1 x Wireless HDMI Receiver (RX)
  • 2 x USB-A to USB-C Power Cables (approx. 100cm each)
  • 2 x HDMI Male-to-Female Adapters (if included with your specific model)
  • 1 x User Manual (this document)
Package contents and dimensions of Lemorele Wireless HDMI Kit

Image: Diagram showing the package contents including TX, RX, USB cables, HDMI adapters, and user manual, along with product dimensions.

Photo of Lemorele Wireless HDMI Kit package contents

Image: Photo of the actual package contents.

4. Product Overview

The Lemorele Wireless HDMI system consists of two main units:

  • Transmitter (TX): Connects to your source device (e.g., laptop, PC, game console).
  • Receiver (RX): Connects to your display device (e.g., TV, projector, monitor).

Each unit features an HDMI connector for video/audio, a USB-C port for power, and an indicator light/button for status and control.

Close-up of Lemorele Wireless HDMI Transmitter (TX) unit

Image: Close-up view of the Transmitter (TX) unit, showing the HDMI connector, USB-C power port, and status button/indicator.

5. Setup Guide

Follow these steps to set up your Wireless HDMI system:

  1. Connect the Transmitter (TX):
    • Plug the HDMI connector of the TX unit into the HDMI output port of your source device (e.g., Laptop, PC, Camera, Set-top Box, Switch, PS4/5).
    • Connect one of the provided USB-A to USB-C power cables to the USB-C port on the TX unit.
    • Plug the USB-A end of the power cable into a 5V=2A USB power adapter (not included) or a powered USB port on your source device. Ensure the TX unit receives sufficient power.
  2. Connect the Receiver (RX):
    • Plug the HDMI connector of the RX unit into an available HDMI input port on your display device (e.g., Projector, TV Set, Monitor, Advertising Display).
    • Connect the second USB-A to USB-C power cable to the USB-C port on the RX unit.
    • Plug the USB-A end of the power cable into a 5V=2A USB power adapter (not included) or a powered USB port on your display device. Ensure the RX unit receives sufficient power.
  3. Power On:
    • Power on your source device and display device.
    • The TX and RX units will automatically power on and attempt to pair. The indicator lights will show their status (e.g., blinking during pairing, solid when connected).
  4. Display Output:
    • Select the correct HDMI input on your display device.
    • The video and audio from your source device should now be wirelessly displayed on your screen.
Connection Diagram for Lemorele Wireless HDMI Transmitter and Receiver

Image: Visual guide for connecting the Transmitter (TX) to various HDMI input sources and the Receiver (RX) to different HDMI output displays.

6. Operating Instructions

Once set up, the Lemorele Wireless HDMI system operates largely automatically:

  • Automatic Connection: The TX and RX units are designed to automatically connect and transmit signals once powered on. No manual pairing is typically required after the initial setup.
  • Signal Transmission: The system utilizes 5G/2.4G dual-band transmission for stable and low-latency (<80ms) video and audio streaming.
  • Resolution: Supports HD video and audio wireless streaming up to 1920x1080 at 60Hz.
  • Transmission Range: The effective transmission distance is up to 50 meters (164 feet) in an empty, unobstructed space. Performance may vary in environments with obstacles or interference.
User streaming content wirelessly from laptop to TV

Image: Example of HD video and audio wireless streaming from a laptop to a television.

Wireless HDMI transmission in a classroom setting

Image: Depiction of the wireless HDMI system transmitting over a distance of 50 meters (164 feet) in an open space like a classroom.

7. User Tips

  • Power Supply: Always ensure both the TX and RX units receive stable 5V=2A power. While some HDMI ports might provide minimal power, a dedicated USB power adapter or a robust powered USB port is highly recommended for optimal and stable performance.
  • Extended Display: When connecting to a PC, the system can be configured as an extended display. The resolution often scales automatically to match the receiving screen.
  • Synchronization: The device is designed to maintain synchronization even after being turned off and on, providing a seamless experience.
  • Clear Line of Sight: For best performance and maximum transmission range, try to maintain a clear line of sight between the transmitter and receiver, minimizing obstructions.

8. Troubleshooting

  • No Signal on Display:
    • Ensure both TX and RX units are properly powered and their indicator lights are solid.
    • Verify that the HDMI cables are securely connected to both the source and display devices.
    • Check if the display device is set to the correct HDMI input source.
    • Try connecting the source directly to the display with an HDMI cable to confirm the source and display are working correctly.
  • Poor Video Quality or Lag:
    • Reduce the distance between the TX and RX units.
    • Remove any obstructions between the units.
    • Ensure there is no significant wireless interference from other devices (e.g., Wi-Fi routers, microwaves).
    • Confirm both units are receiving adequate power (5V=2A).
  • No Audio:
    • Check the audio settings on your source device and display device.
    • Ensure the volume is not muted on either device.
  • Units Not Pairing:
    • Power cycle both the TX and RX units by unplugging and re-plugging their power cables.
    • Ensure they are within close proximity during initial pairing.

9. Specifications

FeatureSpecification
ModelP20C
BrandLemorele
Connector TypeWireless HDMI
CertificationCE
Resolution1080P @ 60Hz (1920x1080)
Transmission Frequency5G / 2.4G Dual Band WiFi
Latency<80ms
Transmission DistanceUp to 50 meters (164 feet) in empty space
Power Input5V=2A (via USB-C)
MaterialABS
Unit Dimensions (approx.)10cm (L) x 3.3cm (W) x 1.3cm (H)
Package Weight (approx.)0.175 kg
Back of product box showing specifications for Model P20C

Image: Product box label detailing model, power, color, resolution, and material specifications.

10. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
  • Storage: When not in use, store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Handling: Handle the units carefully to avoid physical damage to the HDMI connectors or internal components.

11. Warranty and Support

For detailed warranty information and technical support, please refer to the official Lemorele website or the comprehensive user manual PDF.

Download User Manual (PDF): Click here to view/download

Manufacturer Contact Information:

  • Manufacturer: Shenzhen Sage IoT Technology Co., Ltd.
  • Address: Yintian Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, China
  • Email: marketingus@lemorele.com
  • Official Website: us.lemorele.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.