ToolKitRc ADP200

Contents

ToolKitRC ADP200 Power Supply Adapter

Model: ADP200 | Brand: ToolKitRC

1. Introduction

The ToolKitRC ADP200 is a compact and powerful AC to DC adapter designed to provide stable power for various RC chargers and other compatible devices. With a 200W output capacity, it ensures efficient and reliable operation for your equipment.

ToolKitRC ADP200 power supply with its retail box.

ToolKitRC ADP200 Power Supply Unit

2. Safety Information

Please read all safety warnings and instructions carefully before using this product to prevent injury or damage.

  • Interference: This device is designed to operate without causing harmful interference and must accept any interference received, including interference that may cause undesired operation.
  • Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Keep out of reach of small children.
  • Power Source: Only use the provided AC power cable or a suitable replacement that meets local safety standards. Ensure the power outlet voltage matches the adapter's input specifications.
  • Environment: Do not expose the adapter to water, moisture, high temperatures, or direct sunlight. Use in a well-ventilated area.
  • Handling: Do not attempt to open, modify, or repair the adapter. Refer all servicing to qualified personnel.
Bottom label of the ADP200 showing input/output specifications, model, and FCC/CE warnings.

ADP200 Bottom Label with Specifications and Warnings

3. Package Contents

Please check the package contents upon opening:

  • ToolKitRC ADP200 Power Supply Adapter
  • AC Power Cable (region-specific)
Open retail box of the ADP200 showing the power supply and the included AC power cable.

ADP200 and AC Power Cable in Box

4. Setup

  1. Connect AC Power: Insert the provided AC power cable into the AC input port on the side of the ADP200 adapter.
  2. Plug into Wall Outlet: Plug the other end of the AC power cable into a suitable wall power outlet (AC 100-240V).
  3. Connect to Device: Connect the XT60 output connector of the ADP200 to the XT60 input port of your compatible RC charger or device.
ADP200 with arrows pointing to input and output ports, labeled 'Input voltage' and 'Output voltage'.

Input and Output Voltage Ports

5. Operating Instructions

Once properly connected, the ToolKitRC ADP200 is ready for use. It provides a stable DC 19.5V output via the XT60 connector. Simply power on your connected device (e.g., RC charger) and begin operation as per its own instruction manual.

ADP200 power supply connected to an iSDT charger, demonstrating its use.

ADP200 Powering an RC Charger

6. Maintenance

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Inspection: Periodically check the AC power cable and XT60 output cable for any signs of damage. Do not use if cables are frayed or damaged.

7. Troubleshooting

If the ADP200 is not providing power, consider the following:

  • No Power Output:
    - Ensure the AC power cable is securely plugged into both the adapter and the wall outlet.
    - Check if the wall outlet is functional by testing it with another device.
    - Verify that the XT60 connector is properly seated in your device's input.
  • Overheating:
    - Ensure the adapter is used in a well-ventilated area and not covered.
    - Confirm that the connected device's power requirements do not exceed the ADP200's maximum output (200W).

If problems persist, discontinue use and contact support.

8. Specifications

FeatureDetail
ModelADP200
Input VoltageAC 100-240V
Input CurrentMAX 4.0A
Input Frequency50/60Hz
Output VoltageDC 19.5V
Output Current10.3A
Output ConnectorXT60
Max Power Output200W
Dimensions (L*W*H)219mm * 133mm * 53mm
MaterialPlastic (ABS)
CertificationsCE, FCC, RoHS

9. User Tips

  • The ADP200 is known for delivering stable voltage with low heat output, even under load.
  • Its compact size makes it highly transportable, ideal for field use or limited workspace.
  • Users report excellent compatibility with various ToolKitRC chargers (e.g., Q6lite) and other brands like iSDT (e.g., M9 charger).

10. Compliance

This device complies with the following standards:

  • CE: Conforms to European Union safety, health, and environmental protection requirements.
  • FCC: Complies with Part 15 of the FCC Rules for digital devices.
  • RoHS: Compliant with the Restriction of Hazardous Substances Directive.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the official ToolKitRC support channels. Please retain your proof of purchase for warranty claims.

A detailed user manual is available in PDF format for further reference: View PDF Manual

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.