Introduction
This manual provides detailed instructions for the ECHTPOWER ES01GY Wireless Game Controller. Please read this manual carefully before use to ensure proper operation and to maximize your gaming experience. This controller is designed for use with Nintendo Switch, PC, Android, and iOS devices.
Package Contents
- Wireless Controller × 1
- Charging Cable × 1
- Instruction Manual × 1
Specifications
| Feature | Detail |
|---|---|
| Model Number | ES01GY |
| Type | Gamepads |
| Compatible Brand/Model | Nintendo (Switch, Switch OLED, Switch Lite), PC, iOS, Android |
| Interface Type | USB (Wired), Bluetooth (Wireless) |
| Joystick Sensor Module | K-SLIVER Hall-Linear |
| Hall Effect | Yes |
| Trigger Button Type | Hall-Linear |
| Power Supply | Built-in polymer battery |
| Battery Capacity | 800mAh |
| Usage Time | 10-16 hours |
| Charging Time | 2.5 hours |
| Charging Voltage | DC 5V |
| Charging Current | 250mA |
| Battery Included | Yes |
| High-concerned Chemical | None |
Product Diagram
Button Layout:
- Left Side: Left joystick/L3, Left 3D ring, D-pad, Screen capture button, R Button, ZR Button, ML Button.
- Right Side: Right joystick/R3, Right 3D ring, A/B/X/Y Buttons, L Button, ZL Button, MR Button.
- Center Top: Home button, Turbo Button, + Button, - Button, M Button (Macro), Charging indicator, Pairing button.
- Bottom: Type-C Charging port, Channel LED, Vibration switch, Light switch key.
Setup
Initial Activation:
Before initial use, the controller needs to be charged using the provided data cable to activate it. Connect the controller to a power source (e.g., a USB adapter) using the USB-C charging cable.
Power On/Off:
- Power On: Press the Home button lightly.
- Power Off: Press the pairing button lightly.
Connection Methods for Various Devices:
| Platform | Connection Method | Power On Combination | Device Name | Indicator Lights |
|---|---|---|---|---|
| Switch | Wired | USB Direct Plug | N/A | Automatic channel indicator light |
| Bluetooth | Long press pairing button for 3 seconds | N/A | Automatic channel indicator light | |
| PC | Wired Xinput | USB direct insertion | Xbox 360 Controller | LED1+LED4 |
| Wired Dinput | Long press +- in Wired Xinput mode | Gamepad | LED2+LED3 | |
| Bluetooth Xinput | Y + pairing button | Xbox 360 Controller | LED1+LED4 | |
| Bluetooth Dinput | X + pairing button | Gamepad | LED2+LED3 | |
| iOS | Bluetooth | Y + pairing button | Xbox 360 Controller | LED1+LED4 |
| Android | Bluetooth | X + pairing button | Gamepad | LED2+LED3 |
Note for Switch Wired Connection: When connecting to the Switch via a wired connection, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Nintendo Switch console.
Operating Instructions
TURBO Rapid Fire Function:
Supported buttons: A/B/X/Y/L/R/ZL/ZR/D-pad
- Manual Turbo: Hold the T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
- Automatic Turbo: Hold the T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
- Disable Turbo: Hold the T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
- Clear All Turbo Settings: Press and hold the "TURBO" button for 3 seconds to clear rapid fire settings for all buttons.
- Speed Adjustment: Rapid fire speed can be adjusted to fast, medium, or slow. Default is slow. Hold the "TURBO" button on the controller and simultaneously operate the right joystick up or down to adjust the speed.
MACRO Setting for Back Buttons:
Supported buttons for programming: A/B/X/Y/L/R/ZL/ZR/L3/R3/D-PAD
- Entering Programming Mode: Press and hold the M button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
- Mapping a Button: Press the button you want to program (map). The left and right 3D rings will flash quickly.
- Programming Confirmation: Press ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming (mapping).
- Note: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
- Clearing Settings: After holding the M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.
Light Adjustment:
- Light Key + R3: Switch between 3 modes (steady, breathing/running horse, rainbow).
- Light Key + L3:
- In steady mode: Switch colors.
- In breathing/running horse mode: No effect.
- In rainbow mode: Pause rainbow effect.
- + and Turbo Combo Key: Press both simultaneously for 3 seconds; the motor vibrates briefly, resetting the lights to default settings.
- Turn On/Off Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold the lighting button again for 10 seconds to reactivate the joystick ring lighting.
Vibration Adjustment:
- After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
- Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function of both motors.
Maintenance
Charging:
- Connect the adapter using a USB data cable. The charging indicator will remain orange while charging.
- Once fully charged, the orange charging indicator will turn off.
Low Battery:
- When the battery is low, the light of the current channel will flash quickly as a reminder to charge the controller.
Standby Mode:
- When the controller is powered on, short press the "Pairing" button to enter standby mode.
- When the controller is in pairing mode, it will automatically enter standby mode if pairing is unsuccessful after 60 seconds.
- When the controller is connected to the console, it will automatically enter standby mode after 15 minutes of inactivity.
Troubleshooting
Resetting the Controller:
- If the controller malfunctions or behaves abnormally, you can reset it by pressing and holding the "HOME" button for 10 seconds.
Common Issues:
- Controller not connecting: Ensure the controller is charged. Verify the correct connection method for your device (wired/Bluetooth) and platform. For Switch wired connection, confirm "Pro Handle Wired Connection" is enabled in console settings.
- Input delay/unresponsiveness: Ensure the controller is fully charged. If using Bluetooth, try moving closer to the device or reducing interference.
- Vibration not working: Check if the vibration function has been disabled (refer to Vibration Adjustment section).
- Lights not working: Check if the joystick ring lighting has been turned off (refer to Light Adjustment section).
- Re-pairing after console off: Some users report needing to re-pair the controller with the Switch after the console has been turned off. This is a known behavior and re-pairing should resolve it.
User Tips
- Ergonomics: The controller is noted for its comfortable and ergonomic design, especially for users with larger hands, providing a better grip than standard Joy-Cons.
- Hall Effect Joysticks: The Hall Effect joysticks are designed to prevent stick drift, offering reliable and precise input.
- Customization: Take advantage of the programmable back buttons (ML/MR) and Turbo function to customize your gameplay experience.
- Lighting: Experiment with the various RGB lighting modes for the joysticks, or turn them off if preferred.
- Wired Connection for Switch: Remember to enable "Pro Handle Wired Connection" in your Switch settings for wired play.
Frequently Asked Questions (FAQ)
- Q: Are the joysticks Hall Effect?
- A: Yes, the controller features Hall Effect joysticks for enhanced durability and drift prevention.
- Q: Does it have a vibration mode?
- A: Yes, the controller includes a vibration function with adjustable intensity levels.
- Q: Is it compatible with Lenovo Legion Go?
- A: The manual specifies compatibility with PC, Android, and iOS. While not explicitly listed, it may work with devices like the Lenovo Legion Go that support PC or Android gamepad input. Please refer to your device's specifications for gamepad compatibility.
- Q: Can it function as two separate controllers?
- A: This is a single wireless gamepad controller. It does not split into two individual controllers.
Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
The product conforms to EC standards for radio interference and UK standards for radio interference. The full text of the EU Declaration of Compliance and UKCA Declaration of Compliance can be found on www.echtpower.com.
FCC ID: 2A88F-ES01
The symbol indicates that the product should not be disposed of with household waste but brought to an appropriate collection point for recycling. Dispose of used products and rechargeable batteries according to local regulations to prevent negative environmental and health impacts.
Precautions
- Do not expose to liquid.
- Do not disassemble.
- Avoid dropping it.
- Avoid extremely high or low temperatures.
Warranty and Support
For warranty claims, technical support, or any inquiries regarding your ECHTPOWER ES01GY Wireless Game Controller, please contact the manufacturer directly using the information below.
Contact Information:
- Tel: 0755-21010839
- Email: service@echtpower.com
- Web: www.echtpower.com
- Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
- Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen