1. Introduction
Thank you for choosing the Arikasen BX27 Wireless Earbuds. These earbuds are designed to provide a high-quality audio experience with advanced features such as Bluetooth 5.3 connectivity, IP7 waterproofing, Environmental Noise Cancelling (ENC), and deep bass. This manual will guide you through the setup, operation, and maintenance of your earbuds.
2. Product Overview
Familiarize yourself with the components of your Arikasen BX27 earbuds and charging case.
Components:
- Product Box
- Power Indicator
- Charging Indicator
- LED Indicator
- Microphone
- Volume + Key
- Volume - Key
- Power On Button
- Charging Contacts
- Sounding Hole
- Tuning Hole
3. Setup and First Use
3.1. Charging the Earbuds
Before first use, ensure the earbuds and charging case are fully charged. Connect the charging case to a power source using the provided Type-C charging cable.
- The charging indicator on the case will show the charging status.
- The earbuds will display their charge percentage on the LED screen inside the case.
- A full charge provides up to 15 hours of single-charge use and up to 60 additional hours with the charging case, totaling 75 hours.
3.2. First Time Pairing
- Take both earbuds out of the charging case at the same time.
- Keep the left and right headphones within 5cm of each other. Wait approximately 5 seconds for the two headphones to pair with each other.
- Turn on your phone's Bluetooth (Wireless) function.
- Search for "BX27" in the list of available devices and click to pair.
- Once connected successfully, you can begin using your earbuds.
4. Operating Instructions
The BX27 earbuds feature physical control buttons for easy operation.
4.1. Music Playback and Volume Control
- Play/Pause: Click the headphone function button once.
- Volume Up: Click the "+" button.
- Volume Down: Click the "-" button.
- Next Song: Long press the "+" button.
- Previous Song: Long press the "-" button.
4.2. Call Management
- Answer/Hang Up Call: Click the function button once.
- Reject Call: Press and hold the function button for 2 seconds during an incoming call.
4.3. Power On/Off
- Power On: Press and hold the function button for 2 seconds.
- Power Off: Press and hold the function button for 5 seconds.
4.4. Voice Assistant
- Activate Voice Assistant: Double-click the function button.
5. Maintenance
5.1. Cleaning
- Regularly clean the earbuds and charging case with a soft, dry cloth.
- Wipe and dry the charging contacts on both the earbuds and inside the case if you experience charging issues.
- Avoid using abrasive cleaners or solvents.
5.2. Storage
- Store the earbuds in their charging case when not in use to protect them and maintain battery life.
- Avoid extreme temperatures and humidity.
6. Troubleshooting
6.1. Pairing Issues
- If earbuds fail to pair or only one earbud connects, unpair the earbuds from your phone's Bluetooth settings. Then, place both earbuds back in the charging case, take them out simultaneously, and repeat the pairing steps (Section 3.2).
- Ensure both earbuds are within 5cm of each other during the initial pairing process.
6.2. Charging Issues
- If the earbuds are not charging, ensure the charging contacts on both the earbuds and the case are clean and dry.
- Check if the charging cable and adapter are working correctly.
6.3. Sound Quality Issues
- Ensure the earbuds are properly seated in your ears for optimal sound.
- Check your device's volume and the earbuds' volume.
- If sound is out of sync or volume differs between earbuds, try re-pairing them as described in Section 6.1.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | arikasen |
| Model | BX27 |
| Bluetooth Version | 5.3 |
| Wireless Range | 10m-20m (Accessible distance < 15M) |
| Battery Life (Total) | Up to 75 hours (15 hours single charge + 60 hours with charging case) |
| Waterproof Rating | IP7 (Sweatproof, not for swimming or showering) |
| Noise Cancellation | Environmental Noise Cancelling (ENC) |
| Driver Diameter | 14.2 mm |
| Vocalism Principle | Dynamic |
| Frequency Response Range | 20 - 20000 Hz |
| Impedance Range | Up to 32 Ω |
| Sensitivity | 90 dB |
| Max Output | 98 |
| Total Harmonic Distortion | 6% |
| Microphone | Yes |
| Voice Assistant | Built-in (Apple Siri Support) |
| Control Buttons | Yes (Physical buttons for Playback, Volume, Calls) |
| Charging Method | Charging case (Type-C connector) |
| Material | Plastic, Silicone (Headphone Pads) |
| Weight | 90g |
| Certifications | CE, FCC |
| Package List | User Manual, Charging case, Charging Cable, Replaceable Pads Set |
8. User Tips
- Comfortable Fit: If the ear hooks cause discomfort, try wearing the earbuds upside down. Many users find this improves comfort, especially for extended wear.
- Physical Buttons: Utilize the physical buttons for precise control over playback, volume, and calls, which are often preferred over touch controls, especially during activities like biking or sports.
- Sports and Activity: The ergonomic design and secure ear hooks make these earbuds ideal for active sports. They are sweatproof (IP7 rated), but remember they are not suitable for swimming or showering.
- Battery Life: The earbuds offer excellent battery longevity, with up to 15 hours on a single charge and a total of 75 hours with the charging case. This is great for long workouts or travel.
- Sound Quality: For the best sound experience, ensure the earbuds fit snugly in your ears. Experiment with the replaceable ear pads to find the best seal.
- Connectivity: Users report fast and reliable connection to phones and tablets, with excellent range and reception.
9. Warranty and Support
For detailed information regarding warranty, returns, or technical support, please refer to the official product documentation or contact the seller directly.
A digital version of the user manual is available for download: Arikasen BX27 User Manual (PDF).