1. Introduction
Thank you for choosing the SAMOLLA TG12000 Trolling Drum Fishing Reel. This reel is engineered with an all-aluminum alloy body and stainless steel bearings, designed for robust performance in sea and saltwater environments. With a powerful 30KG drag, it is suitable for various fishing methods including ocean boat fishing, ocean rock fishing, and ocean beach fishing. This manual provides essential information for the proper setup, operation, and maintenance of your fishing reel to ensure its longevity and optimal performance.

2. Safety Warnings
⚠️ WARNING
Improper disassembly, lubrication, or cleaning will void the warranty and may cause permanent damage to the reel. Always follow the instructions carefully.
3. Preparation
3.1. Tools Required
- Soft cloth
- Cotton swabs
- Screwdriver set
- Tweezers
- Bearing oil
- Gear grease
- Reel cleaner
3.2. Working Environment
Ensure your working area is clean, dry, dust-free, and well-lit to prevent contamination during maintenance.
3.3. Initial Preparation
Before any maintenance or assembly, remove the fishing line and clean any surface dirt from the reel.
4. Assembly
The SAMOLLA TG12000 reel is designed for easy assembly. Follow these steps to attach the handle:
- Unpack the reel and all components, including the handle and any associated hardware (screws, washers).
- Align the handle arm with the designated slot on the reel body.
- Secure the handle arm using the provided screw and lock nut. Ensure it is tightened firmly but do not overtighten.
- Attach the handle knob to the handle arm.

For a visual guide on unboxing and initial assembly, please refer to the video below:
5. Operation
5.1. Handle Operation
The SAMOLLA TG12000 features a right-hand retrieve rocker arm. Turn the handle clockwise to retrieve line. The oversized and comfortable handle provides a secure grip during use.
5.2. Drag System
The reel is equipped with a powerful drag system, capable of up to 30KG max drag. Adjust the drag using the brake adjustment button. The brake knob positioning switch allows you to increase braking force by pressing it when the knob reaches the positioner.
5.3. Alarm Button Switch
An alarm button switch is located on the left side of the reel. When a fish bites the hook and pulls the line, the spool will emit a tick alarm sound, alerting you to the strike.

6. Maintenance
6.1. Daily Maintenance (After Every Use)
- Rinse the reel with fresh water to remove salt, sand, and impurities.
- Wipe the reel body completely dry with a soft cloth.
- Remove the spool and air-dry bearings and internal parts.
- Check the handle, drag system, and spool rotation for smoothness.
- Apply 1-2 drops of bearing oil to the spool bearings if necessary.
6.2. Deep Maintenance (Every 1-3 Months)
Step 1: Disassembly
- Loosen the spool knob and remove the spool.
- Remove the handle, lock nut, and drag assembly.
- Open the side cover and take out the gear set.
- Remove bearings, washers, and small parts carefully.
Step 2: Cleaning
- Wipe old grease, metal powder, and dirt with cotton swabs.
- Clean all bearings with special reel cleaner and dry fully.
- Do NOT use strong solvents such as gasoline or thinner.
Step 3: Lubrication
- Main gears and drive shaft: Apply proper gear grease.
- Bearings and rotating parts: Apply 1-2 drops of bearing oil.
- Drag washers: Use special drag grease (do NOT overlubricate). Keep lubricant away from the drag surface.
Step 4: Reassembly & Test
- Reinstall all parts in reverse order.
- Do NOT over-tighten screws.
- Adjust the drag system to ensure stable and even tension.
- Test handle rotation, spool free spin, and drag function.
6.3. Important Maintenance Warnings
- Rinse immediately after saltwater use to prevent corrosion.
- Do not disassemble parts you are not familiar with.
- Avoid excessive lubrication, which causes dust adhesion.
- Store the reel in a cool, dry, and ventilated place.
- Replace worn bearings, gears, and drag washers in time.
6.4. Maintenance Frequency
- Occasional freshwater jigging: Every 2-3 months.
- Frequent heavy jigging: Every 1 month.
- Saltwater/deep-sea jigging: Clean after every use, full maintenance monthly.
7. Specifications

| Feature | Specification |
|---|---|
| Model | TG12000 |
| Brand Name | SAMOLLA |
| Material | Stainless steel (Body: All Aluminum Alloy) |
| Bearings | 8+1 Stainless Steel Bearings (Sealed against seawater corrosion) |
| Gear Ratio | 3.4:1 |
| Rocker Arm | Right Hand |
| Max Drag | 30 KG |
| Weight | 950g |
| Line Capacity (mm/m) | 0.5/620, 0.55/510, 0.60/430 |
| Line Capacity (LBS/YDS) | 18/675, 20/560 |
| Fishing Reels Type | Trolling Reel |
| Fishing Method | Trolling |
| Position | Ocean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing |
| Dimensions (approx.) | Height: 110mm, Length: 140mm, Handle Length: 70mm, Spool Width: 58mm |
| High-concerned chemical | None |
| Origin | Mainland China |

8. Troubleshooting
- Reel feels stiff or noisy: This often indicates a need for cleaning and lubrication. Follow the deep maintenance steps (Section 6.2). Ensure no sand or debris is trapped in the gears or bearings.
- Drag not smooth or consistent: Check the drag washers. They might be dry, worn, or improperly lubricated. Apply special drag grease sparingly, ensuring no lubricant gets on the drag surface itself. If worn, replace them.
- Spool not spinning freely: Inspect the spool bearings for dirt or corrosion. Clean and lubricate them as per maintenance instructions.
- Handle is loose: Ensure the handle arm and knob are securely fastened. Check for any missing washers or screws.
9. User Tips
- The TG12000 reel offers excellent value for money with robust construction and powerful drag, making it suitable for large fish.
- Its all-aluminum alloy body and stainless steel bearings provide good corrosion resistance, especially important for saltwater use.
- The drag system is noted for its strength and effectiveness, even when not fully engaged.
- The reel has a large line capacity, which is beneficial for various fishing scenarios.
- Regular maintenance, particularly after saltwater exposure, is key to preserving the reel's performance and preventing rust.
10. Frequently Asked Questions (FAQ)
- Q: Is this reel available in a left-hand retrieve version?
- A: The SAMOLLA TG12000 model specified in this manual features a right-hand retrieve rocker arm. Please check product listings for alternative configurations if a left-hand model is desired.
- Q: Does the reel have a ratchet sound?
- A: Yes, the reel is equipped with an alarm button switch that produces a 'tick' sound when a fish bites and pulls line, acting as a ratchet alarm.
- Q: Where can I find a schematic of the parts?
- A: For detailed schematics or parts diagrams, please refer to the official SAMOLLA support channels or contact the seller directly. This manual focuses on general operation and maintenance.
11. Warranty and Support
This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims. For technical support, service, or inquiries regarding parts, please contact the SAMOLLA Official Store or your authorized dealer. Improper maintenance or unauthorized modifications may void your warranty.