1. Product Overview
The cltgxdd 6.35mm Male to 3.5mm Female Audio Adapter is designed to convert a 6.35mm (1/4 inch) stereo jack to a 3.5mm (1/8 inch) stereo jack. This allows you to connect headphones or other audio devices with a 3.5mm plug to equipment that only has a 6.35mm output, such as amplifiers, mixing consoles, or electric guitars. These adapters support three-pole, dual-channel stereo audio transmission.
2. Safety & Warnings
Important Safety Information: Keep away from fire and high temperature.
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord (if applicable) out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
- Ensure the adapter is fully inserted into both devices to prevent intermittent audio or damage.
3. Setup
- Before First Use: Remove any protective films or packaging from the adapter.
- Connecting the Adapter: Insert the 6.35mm male end of the adapter firmly into the 6.35mm female jack of your audio source device (e.g., amplifier, mixer).
- Connecting Your Device: Plug your 3.5mm audio cable or headphone jack into the 3.5mm female end of the adapter. Ensure a secure and snug fit for optimal audio quality.
4. Operating
The cltgxdd audio adapter is a passive device and operates on a