1. Introduction
This manual provides essential information for the proper installation, use, and maintenance of your new Front Bumper Grill Moulding Trim. Please read these instructions carefully before proceeding with installation to ensure optimal performance and safety.
2. Safety & Warnings
▲Warning: Improper installation may cause the bumper to loosen, detach, or pose a driving hazard.
- It is highly recommended that installation be carried out by professional technicians.
- Always wear appropriate safety gear, such as gloves and eye protection, during installation.
- Ensure the vehicle is parked on a level surface and the engine is off before beginning any work.
- Do not modify the product. Any modifications may compromise its structural integrity and void any potential warranty.
3. Product Information
This product is designed to enhance the aesthetic appeal and provide a protective cover for the front bumper grille of compatible BMW 7 Series models.
Manufacturer Details:
Manufacturer: Guangzhou Kuxiong Shi Trading Co., Ltd
No. 503, Building 3, Courtyard 2, Zhongquantang Road, Industrial Avenue, Haizhu District, Guangzhou City
Phone: 86-18814180059
Email: tingting26181@outlook.com
EU Authorized Representative: Sea&Mew Consulting GmbH
Mittenhuber Straße 4, 92318 Neumarkt
Phone: +4915224685061
Email: Compliance.EU@outlook.com
4. Compatibility
This Front Bumper Grill Moulding Trim is specifically designed to fit the following vehicle models:
- BMW 7 Series F01 M Sport (2009-2015)
- BMW 7 Series F02 M Sport (2009-2015)
Before installation, please confirm that the bracket model is compatible with your specific vehicle year and trim level.
5. Package Contents
Your package should contain the following items:
- 2 x Front Bumper Grille Trims (available in Glossy Black or Carbon Fiber finish)
Please inspect all components upon receipt to ensure they are complete and undamaged.
6. Installation Instructions
It is recommended that the installation be carried out by professional technicians.
- Preparation: Ensure the installation area on the vehicle's front bumper is clean, dry, and free from debris or old adhesive residue.
- Compatibility Check: Before proceeding, visually confirm that the supplied trim pieces match the contours and mounting points of your vehicle's bumper.
- Positioning: Carefully align each trim piece with the original mounting holes on the vehicle's front bumper.
- Securing: Secure the trim pieces using the integrated clips or mounting points. Apply firm, even pressure to ensure a snug fit.
Figure 1: Rear view of the trim showing mounting clips.
- Final Tightening: Ensure all fasteners (if applicable) are securely tightened before reinstalling the main bumper assembly or driving the vehicle.
- Post-Installation Check: After installation, thoroughly check that the bumper trim fits well, is not loose, and does not make any abnormal noises when the vehicle is in motion.
For visual reference, here are examples of the trim installed:
Figure 2: Glossy Black trim installed on a white BMW 7 Series.
Figure 3: Carbon Fiber trim installed on a dark BMW 7 Series.
7. Maintenance
To maintain the appearance and longevity of your bumper grill moulding trims:
- Regularly clean the trims with a soft cloth and mild automotive soap.
- Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
- Inspect the trims periodically for any signs of damage, looseness, or wear.
- If any damage occurs, consider replacing the trim to maintain vehicle aesthetics and structural integrity.
8. Troubleshooting
If you encounter any issues after installation, consider the following:
- Loose Fit/Rattling: Re-check all mounting points and fasteners to ensure they are securely attached. Ensure the trim is correctly seated in the bumper's contours.
- Misalignment: If the trim appears misaligned, carefully detach and re-align it with the original mounting holes. Do not force the trim into place.
- Damage: If the trim is damaged during installation or use, it is recommended to replace the affected piece to maintain the vehicle's appearance and prevent further issues.
9. Specifications
| Attribute | Detail |
|---|---|
| Product Name | Front Bumper Grille Trims |
| Material | High-quality ABS Plastic |
| Color Options | Glossy Black, Carbon Fiber |
| Placement on Vehicle | Front Left/Right |
| Part Numbers (OEM NO.) | 51118047727, 51118047728 |
| Length | 47 cm (18.5 inches) |
| Width | 6.5 cm (2.56 inches) |
| Height | 3.8 cm (1.5 inches) |
Figure 4: Product dimensions.
Product images showing both finishes:
Figure 5: Glossy Black finish.
Figure 6: Carbon Fiber finish.
10. User Tips
- For the best aesthetic integration, ensure both left and right trims are installed symmetrically.
- Consider using a non-abrasive detailing spray to keep the trim looking new and protected from UV exposure.
- If you live in an area with harsh weather conditions, inspect the trims more frequently for any signs of wear or damage.
11. Compliance Information
This product bears the CE mark, indicating conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
For detailed compliance documentation, please refer to the official user manual PDF available at: Product User Manual (PDF)
12. Warranty & Support
For any questions regarding product functionality, installation, or potential defects, please contact the seller or manufacturer directly using the contact information provided in Section 3 of this manual.
Please retain your proof of purchase for any warranty claims.