ludengchaoshi XG-Ceiling fan lights

Contents

Modern LED Pendant Light Fixture User Manual

Model: XG-Ceiling fan lights

1. Safety Information

Please read all instructions carefully before installation and use. Retain this manual for future reference.

  • Always disconnect power at the main circuit breaker before installation, maintenance, or cleaning.
  • Installation and maintenance must be performed by a qualified electrician or professional technician.
  • Ensure the mounting surface can support the weight of the fixture.
  • Do not exceed the specified wattage for any replaceable bulbs (if applicable). This fixture uses integrated LEDs.
  • Avoid direct contact with the light source when the fixture is on, as it may be hot.
  • Do not modify the fixture in any way not described in this manual.
  • This product is designed for indoor use only.

2. Package Contents

Verify that all components are present and undamaged before beginning installation.

  • Main Light Fixture Body (1 PCS)
  • Ceiling Plate (1 PCS)
  • Expansion Tubes (4 PCS)
  • Self-tapping Screws (4 PCS)
  • Round Head Screws (4 PCS)
  • Remote Control (if included with your model)

3. Installation Guide

Follow these steps carefully for proper installation. It is recommended to have two people for installation.

  1. Prepare the Ceiling: Disconnect power at the main circuit breaker. Place the ceiling plate against the ceiling at the desired installation location and mark the positions for the self-tapping screws.
  2. Drill Holes: Use an impact drill to drill holes at the marked positions. Insert the expansion tubes into the drilled holes using a hammer.
  3. Secure the Ceiling Plate: Align the ceiling plate with the expansion tubes. Use a screwdriver to secure the ceiling plate to the ceiling with the self-tapping screws.
  4. Wiring: Connect the household electrical wires to the fixture's wires. Ensure the live wire (usually brown or red) connects to the live wire of the fixture, and the neutral wire (usually blue or black) connects to the neutral wire of the fixture. Secure connections with wire nuts.
  5. Adjust Hanging Length: The hanging wires are adjustable up to 1 meter. Adjust the length of the steel wires to position the light fixture at the desired height.
  6. Attach Fixture Body: Carefully lift the main light fixture body. Align the side holes of the fixture's canopy with the holes on the installed ceiling plate. Secure the fixture to the ceiling plate using the round head screws with a screwdriver.
  7. Final Check: Ensure all connections are secure and the fixture is firmly mounted. Restore power at the main circuit breaker.
Installation Diagram
Figure 1: Installation Diagram. Shows steps for mounting the ceiling plate, wiring, and attaching the main light body.
Adjustable Hanging Wire
Figure 2: Adjustable Hanging Wire. Illustrates how the hanging wire length can be adjusted.

4. Operating Instructions

This pendant light fixture offers versatile control and lighting options.

4.1 Control Methods

The light can be controlled via a standard wall switch or the included remote control (for models with remote functionality).

Two Control Methods
Figure 3: Two Control Methods. Shows both wall switch and remote control options.

4.2 Dimming and Color Temperature Adjustment

The fixture features intelligent stepless dimming, allowing you to adjust both brightness and color temperature.

  • White Light: Provides clear and bright illumination, suitable for tasks.
  • Neutral Light: Offers a comfortable, natural light color for general use.
  • Warm Light: Creates a romantic and cozy atmosphere.

Use the remote control to cycle through these modes and adjust brightness levels. Some models may also support wall switch control for basic mode changes.

Intelligent Poleless Dimming Design
Figure 4: Intelligent Poleless Dimming Design. Demonstrates white, neutral, and warm light settings.

4.3 Star Projection Feature

Certain elements of the fixture project a star pattern onto the ceiling, adding a unique ambient effect.

Star Projection Effect
Figure 5: Star Projection Effect. Shows the star pattern projected onto the ceiling from the cylindrical light elements.

4.4 Product Demonstration Video

Video 1: Product demonstration showcasing various lighting modes and the star projection feature.

5. Maintenance

To ensure the longevity and optimal performance of your pendant light fixture, follow these simple maintenance guidelines:

  • Cleaning: Before cleaning, ensure the power is turned off and the fixture has cooled down. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
  • Inspection: Periodically check the hanging wires and mounting hardware for any signs of wear, looseness, or damage. If any issues are found, consult a qualified electrician.
  • LEDs: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.

6. Troubleshooting

If you encounter any issues with your light fixture, refer to the following common problems and solutions:

Problem Possible Cause Solution
Light does not turn on
  • No power to the fixture.
  • Loose wiring connection.
  • Faulty wall switch or remote control.
  • Check circuit breaker and wall switch.
  • Ensure all wiring connections are secure (power off first).
  • Replace remote control batteries or test wall switch.
Light flickers or dims unexpectedly
  • Loose wiring.
  • Incompatible dimmer switch (if using a non-supplied dimmer).
  • Power fluctuations.
  • Check wiring connections (power off first).
  • Ensure dimmer switch is compatible with LED fixtures.
  • Consult an electrician if power issues persist.
Remote control not working
  • Dead batteries.
  • Obstruction between remote and fixture.
  • Remote not paired (if applicable).
  • Replace batteries.
  • Ensure clear line of sight.
  • Refer to the full PDF manual for pairing instructions.

If the problem persists after trying these solutions, please consult a qualified electrician or contact customer support.

7. Specifications

Feature Detail
Brand Name ludengchaoshi
Model Number XG-Ceiling fan lights
Item Type Pendant Lights
Installation Type Cord Pendant, Self-Contained
Material Metal
Style Modern Style
Voltage 90 - 260 V AC
Luminous Flux 2000-82000 (Range)
Is Dimmable Yes
Is Smart Device Yes
Switch Type REMOTE CONTROL
Lighting Area 5-10 square meters
Package Length 102 cm
Package Width 30 cm
Package Height 11 cm
Package Weight 2.08 kg
Origin Mainland China
Certification CE, EMC, FCC, GS, ROHS

Note: The voltage range of 90-260V AC makes this lamp compatible with most international electrical standards, including 220V systems. However, always ensure local electrical standards and plug types are met during installation.

8. Warranty and Support

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects.

For detailed warranty terms, troubleshooting, or further assistance, please refer to the complete user manual available in PDF format:

View User Manual (PDF)

9. User Tips

  • Check Dimensions: Before purchasing, measure your dining table or living room area to ensure the fixture's dimensions (especially the 100cm length) are suitable for your space.
  • Color Options: The fixture is available in different body colors (e.g., Black, Bolden). Consider how the color will complement your interior design.
  • Remote vs. Wall Control: While the remote offers full dimming and color temperature control, the basic on/off functionality via a standard wall switch is reliable and sufficient for many users.
  • Adjustable Hanging: Take advantage of the adjustable hanging wire to set the light at the perfect height for your ceiling and table, optimizing both aesthetics and illumination.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.