IRALAN BY-601-500-1

Contents

IRALAN Modern Ceiling Light with Invisible Blade Fan

Model: BY-601-500-1

Brand: IRALAN

Introduction

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your IRALAN Modern Ceiling Light with Invisible Blade Fan. Please read this manual thoroughly before installation and use, and keep it for future reference.

This ceiling fan features an energy-saving motor, a modern design with invisible fan blades, and integrated LED lighting with adjustable color temperature and brightness, all controllable via a remote.

Safety Warnings

  • The input wattage for this fan should be 110V/60Hz.
  • Electrical installation must be performed by a qualified licensed electrician.
  • To reduce the risk of electric shock, ensure electricity has been turned off before assembling or disassembling.
  • The assembling wire order must be Ground wire, hot (supply) wire/neutral wire. The disassembling wire order should be neutral wire/hot (supply) wire, ground wire.
  • Make sure all assembled screws are tight during the assembling.
  • To reduce the risk of injury, do not touch the blade when the fan is running.
  • Non-professional operation is strictly prohibited.

Components List

Please verify that all components are present before beginning installation:

Diagram showing individual components of the ceiling fan: canopy, downrod, connector, mounting bracket, fan body, light kit, light glass, and screw pack.
  • Canopy
  • Downrod
  • Connector
  • Mounting Bracket
  • Fan Body
  • Light Kit
  • Light Glass
  • Screw Pack

Tools Required for Installation

The following tools are required for installation:

  • Electrical Tape
  • 14 Wrench
  • Slotted Screwdriver
  • Phillips Screwdriver
  • Herringbone Ladder
  • Tape Pliers

Installation Instructions

1. Mounting Bracket Installation

For Concrete Ceiling:

  1. Drill two holes with an appropriate depth using an 8mm diameter drill bit.
  2. Insert two expansion screws into the holes.
  3. Fix the hanger bracket into the expansion screws with wood screws and tighten it using the nuts of the expansion screws.

For Wood Ceiling:

  1. Fix the mounting bracket to the wood ceiling (minimum thickness of 7cm) using 4 wood screws.

2. Light Kit Installation

  1. Loosen four screws from the bottom of the fan body and remove one screw, setting it aside for later use.
  2. Attach the light kit to the fan body by rotating it until it seats into the three loosened screws.
  3. Tighten the three screws, then screw in the previously removed screw and tighten it.

3. Installation of the Hanger System

  1. Remove the R clip and pin from the downrod.
  2. Thread the lead wire through the downrod, canopy, and connector.
  3. Seat the downrod into the fan body and rotate it until the holes on the downrod align with the holes on the fan body.
  4. Insert the pin through the aligned holes and secure it with the R clip on the other side.
  5. Place the downrod with the hanger ball into the mounting bracket.
  6. Rotate the motor assembly until the "Check Tab" on the mounting bracket drops into the "Registration Slot" on the hanging ball and seats firmly.

4. Attaching the Canopy and Glass

  1. Raise the canopy to the ceiling to cover the mounting bracket. Ensure the canopy seats into the two screws on the bracket.
  2. Rotate the canopy to ensure the screw heads are at the narrow end of the keyholes, then tighten the screws.
  3. Ensure the key slot on the light glass aligns with the key slot on the fan body.
  4. Rotate the glass clockwise slightly until it is firmly secured.

Operating Instructions

Your IRALAN Ceiling Light with Fan is controlled by a remote control, offering various functions:

Remote control and black ceiling fan, indicating 72W power, three-color dimming, and adjustable wind speed.
  • Power On/Off: Use the designated button on the remote to turn the light and fan on or off.
  • Light Color Temperature Adjustment: Cycle through three color temperatures:
    • White Light (6500K): For focused tasks.
    • Natural Light (4000K): For daily use.
    • Warm Light (3000K): For relaxation.
    Diagram showing three light color temperatures: 6500K (Focus), 4000K (Daily), and 3000K (Relax), along with a brightness adjustment bar from 10% to 100%.
  • Adjustable Brightness: Adjust the light brightness from 10% to 100% using the remote control.
  • Wind Speed Adjustment: Select from 6 different wind speeds to suit your comfort level.
  • Timing Function: Set the fan to turn off automatically after 1 hour, 2 hours, or 4 hours.
  • Black ceiling fan with remote control, illustrating a 4-speed timing function with options for 1h, 2h, and 4h.

Maintenance

  • Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
  • Blade Care: The invisible fan blades are designed for durability. Avoid harsh chemicals that may damage the acrylic material.
  • Motor: The pure copper silent motor is designed for long-term, maintenance-free operation.

Troubleshooting

Fan Will Not Start

  • Check the wire connections to the fan; ensure they are all correct and secure.
  • Verify that the input wattage is correct (110V/60Hz).

Fan Sounds Noisy

  • Make sure all assembled screws are tight.
  • Ensure wire nut connections are not rubbing against each other or the interior wall of the switch housing.

Balance Adjustment for Wobble

If the fan wobbles after final assembly, follow these steps:

  1. Take out the balance kit pack from the package.
  2. Stick two balance magnet pieces on any one place marked with a digit on the fan (refer to the diagram below for typical placement).
  3. Turn on the fan to check if the wobble problem is still noticeable.
  4. Repeat this process, moving the magnet pieces, until the wobble disappears.
  5. Once the optimal position is found, remove the balance magnet pieces and peel a balance kit (adhesive weight) to stick on that exact spot instead.
Diagram illustrating fan blade balance adjustment with magnet pieces and balance kit.

Note: The image above shows the concept of balance adjustment. The specific diagram for magnet placement was not provided in the OCR, but the principle is to find the spot that eliminates wobble.

Specifications

Product information table and dimensions for the IRALAN ceiling fan.
Attribute Value
Brand NameIRALAN
Model NumberBY-601-500-1
Item TypeCeiling Fans
Installation MethodAssembly
Power SourceAC
Light SourceLED bulbs
Is Bulbs IncludedYes
Is DimmableYes
Control MethodREMOTE CONTROL
Switch TypeREMOTE CONTROL
Number of Blades4
FeaturesInvisible fan blades
StyleModern Style
CertificationCCC, CE
OriginMainland China
Warranty1 year
Luminous Flux2000-82000 Lumen (4800LM for 72W model)
Power72W
Application Area10-25M²
Size Options36 inch (96cm), 42 inch (110cm), 48 inch (118cm)
Voltage90-265V
Wind Speed6 Speeds
Height (Fan Body)7.87 inches (20 cm)
Downrod Length15.7 inches (40 cm)

User Tips

  • Upon receiving your product, carefully inspect all components for any damage or missing parts before beginning installation.
  • For optimal performance and longevity, ensure the fan is installed on a stable ceiling structure capable of supporting its weight.
  • When adjusting light settings, experiment with the different color temperatures (3000K, 4000K, 6500K) to find the most suitable ambiance for your activity or mood.

Warranty and Support

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects.

For any questions, technical assistance, or warranty claims, please contact your distributor or the sales team using the contact information provided at the time of purchase.

A detailed user manual in PDF format is also available for download. View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.