1. Product Introduction
This product is a universal LED motorcycle auxiliary fog light spotlight designed to enhance visibility during foggy and nighttime cycling. It features a highly transparent PC lens and a durable aluminum alloy shell. The light is equipped with a 360-degree adjustable bracket, making it suitable for installation on most motorcycle models, including BMW R1200GS, F800GS, F700GS, F650, and K1600. Its exquisite appearance, beautiful installation, and practicality make it an ideal addition to your motorcycle.
Video: Product overview, component demonstration, light output, and waterproof test.
Image: Universal Motorcycle LED Auxiliary Fog Lights in operation.
2. Safety Information
Warning: Please read all safety information before installation and use.
- Voltage: This product is generally suitable for a motorcycle voltage of 12V. It is forbidden to connect other voltage power sources to avoid burning out the lights.
- Installation Safety: After installation, gently shake the light fixture to ensure it is not loose. Check all screws again before driving to prevent them from loosening or the light bulb from falling off due to collision, which could affect driving safety.
- Circuit Safety: Ensure that the vehicle's power is turned off when connecting to the power source to avoid short circuits. Unauthorized modifications to the circuit are not allowed, as this can damage the vehicle's electronic system.
- Environmental Protection: Avoid long-term use in strong acid/alkali environments. When cleaning the vehicle, do not use a high-pressure water gun to directly spray on the gaps of the lighting fixtures.
- Child Safety: Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
3. Setup and Installation
Follow these steps to properly install your motorcycle auxiliary fog lights:
- Preparation for Installation Area: Select a stable position on your vehicle (such as guardrails or handlebars) where the lights can be securely fixed. Ensure the surface is clean and free of dirt or sediment.
- Fixed Bracket: Use the provided screws to fix the 360° adjustable bracket in the chosen position. Verify that the bracket is horizontal and stable.
- Installation of Lighting Fixtures: Connect the LED fog light to the bracket. Adjust the lighting angle to your preference and then securely tighten the fixing screws.
- Connect Power Supply: Connect the lamp power cord to the vehicle's 12V voltage system. The red wire should be connected to the positive (+) pole, and the black wire to the negative (-) pole.
Image: Auxiliary lights and wiring harness.
Image: Example of auxiliary lights mounted on a motorcycle.
4. Operating Instructions
After completing the installation, perform a functional test:
- Functional Test: Turn on the motorcycle's power. Check if the light is lit properly.
- Beam Angle Adjustment: Confirm that the beam angle meets your requirements for optimal visibility.
- Final Tightening: Once satisfied with the light's operation and angle, tighten all screws again to ensure secure mounting.
Image: Close-up of the bright light output.
5. Maintenance
- Cleaning: When cleaning your motorcycle, avoid using a high-pressure water gun directly on the gaps of the lighting fixtures to prevent water ingress and potential damage.
- Environmental Conditions: Avoid prolonged exposure to strong acid or alkali environments, which can degrade the materials of the light.
- Regular Inspection: Periodically check the mounting screws and wiring connections to ensure they remain secure and free from corrosion or damage.
6. Troubleshooting
If you encounter issues with your auxiliary lights, consider the following:
- Lights Not Turning On:
- Ensure the motorcycle's power is on.
- Verify that the red wire is connected to the positive (+) pole and the black wire to the negative (-) pole of the 12V power supply.
- Check for any loose wiring connections or short circuits. - Lights Flickering or Dim:
- Confirm the voltage supply is stable 12V. Incorrect voltage can cause flickering or dimming.
- Inspect wiring for any damage or poor connections. - Light Falling Off or Loose:
- Re-tighten all mounting screws on the bracket and light fixture.
- If the original plastic brackets are used, consider replacing them with more robust aluminum brackets for increased durability, especially for off-road use. - Damage to Vehicle Electronic System:
- Ensure no unauthorized modifications were made to the circuit. If modifications were made, revert them or consult a professional.
7. Specifications
| Feature | Specification |
|---|---|
| Item Type | Fog Lamp Assembly / Spotlight Assembly |
| Wattage | 40W (per light) |
| Operating Voltage | 10-30V DC |
| Color Temperature | 6000K |
| Beam Pattern | Spot beam, Flood beam |
| Waterproof Rating | IP67 |
| Operating Temperature | -45℃ to 85℃ |
| Mounting Bracket | 360° Universal Adjustment Bracket |
| Origin | Mainland China |
| Dimensions (approx.) | 4.3cm (diameter) x 11cm (length) |
| Package Dimensions | 23cm (L) x 20cm (W) x 9cm (H) |
| Package Weight | 1.028 kg |
Image: Product dimensions.
Image: E9 certification and integrated mold design.
8. User Tips
- Bracket Upgrade: While the included brackets are functional, some users recommend purchasing separate aluminum brackets for enhanced durability, especially if you plan to use the lights on a trail bike or in rough conditions.
- Secure Installation: Always double-check all screws and connections after installation and before riding to ensure everything is securely fastened.
- Wiring: The product typically includes all necessary wiring for a standard 12V motorcycle connection.
9. Frequently Asked Questions (FAQ)
- Q: Does it include all the wiring?
- A: Yes, the product typically includes the necessary lamp power cord for connection to your vehicle's 12V system.
- Q: Is this light 40W each or both together?
- A: The specification states 40W, and the product is generally sold as a pair, implying 40W per light for a total of 80W for the pair.
- Q: Is this product sold as a pair or individually?
- A: This product is typically sold as a pair (e.g., "2pcs Light" or "2pcs Light Bracket" are common options).
10. Warranty and Support
This fog light complies with Safety Requirements in Europe, including E-mark approvals for legal importing and selling. If you require assistance with installation, troubleshooting, or have any questions regarding the product's compliance or functionality, please contact the seller or manufacturer directly for support.