mrhello 1K0965561J

Contents

Auxiliary Electric Cooling Water Pump

Model: 1K0965561J

Brand: mrhello

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your new mrhello Auxiliary Electric Cooling Water Pump. Please read this manual thoroughly before installation and keep it for future reference.

Product Overview

The Auxiliary Electric Cooling Water Pump (OEM NO. 1K0965561J) is designed to circulate coolant in your vehicle's engine cooling system, particularly for auxiliary cooling functions. It is constructed from durable ABS plastic and is a direct 1:1 exchange replacement part.

Front view of the mrhello 1K0965561J Auxiliary Electric Cooling Water Pump with cable and connector.

Figure 1: Front view of the Cooling Water Pump with cable and connector.

2. Safety Information

Always observe the following safety precautions when handling and installing automotive parts:

  • Ensure the vehicle's engine is off and cooled down before beginning any work.
  • Disconnect the vehicle's battery to prevent electrical hazards.
  • Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
  • Handle coolant with care; it can be toxic. Dispose of old coolant responsibly.
  • If you are unsure about any step, consult a qualified mechanic.

3. Vehicle Compatibility

This auxiliary electric cooling water pump is compatible with various models from Volkswagen, Audi, Skoda, and SEAT. Please verify your vehicle's make, model, year, and engine code against the list below to ensure proper fitment. Note that product fitment can vary based on the year of production; always double-check the shape of your existing part.

Compatible Models:

  • VW VOLKSWAGEN:
    • Golf / GTI (2007-2014): 1.8 TSI CDAA, 2.0 TFSI CCTA/CBFA/CCZB/CAWB
    • Jetta / GLI (2006-2014): 2.0 TFSI CCTA/CBFA/CCZA/CAWA
    • Passat (2008-2014): 1.8 TSI BZB/CDAA/CDAB, 2.0 TFSI CCTA/CCTB/CBFA/CCZB/CCZA
    • Passat CC (2009-2012): 1.8 TSI BZB/CDAA/CDAB, 2.0 TFSI CCTA/CBFA/CCZB/CCZA
    • Eos (2009-2014): 2.0 TFSI CCTA/CBFA/CCZB/CCZA/CAWB
    • CC (2012-2014): 1.8 TSI CDAA/CDAB, 2.0 TFSI CCTA/CBFA/CCZB
    • Scirocco (2009-2014): 2.0 TFSI CAWB/CCZB
    • Tiguan (2008-2014): 2.0 TFSI All Engine
  • AUDI:
    • A3 (2004-2013): 1.8 TSI BYT/BZB/CDAA, 2.0 TFSI CCTA/CBFA/CCZA/CAWB
    • Q3: 1.8 TSI, 2.0 TFSI
    • TT (2007-2014): 1.8 TSI CDAA, 2.0 TFSI CCZA/CESA/CETA
  • SKODA:
    • Octavia (2004-2014): 1.8 TSI BZB/CDAA/CDAB, 2.0 TFSI CCZA
    • Superb (2004-2014): 1.8 TSI BZB/CDAA/CDAB, 2.0 TFSI CCZA
    • Yeti: 1.8 TSI
  • SEAT:
    • Altea (2007-2014): 1.8 TSI BZB/BYT/CDAA, 2.0 TFSI CCZB
    • Leon (2006-2013): 1.8 TSI BZB/CDAA, 2.0 TFSI CCZB

4. Package Contents

Your package should contain the following item:

  • 1x Auxiliary Electric Cooling Water Pump (Model: 1K0965561J) with integrated electrical connector and wiring.
The cooling water pump in its packaging, showing the part number 1K0965561J.

Figure 2: Cooling Water Pump as received in packaging.

5. Installation Instructions

This pump is designed for a 1:1 exchange installation. Professional installation is recommended. Refer to your vehicle's service manual for specific procedures. The following steps are general guidelines:

  1. Preparation: Ensure the engine is completely cool. Disconnect the negative terminal of the vehicle's battery.
  2. Drain Coolant: Partially drain the engine coolant to a level below the auxiliary water pump. Use a suitable container for collection and dispose of coolant properly.
  3. Locate the Pump: Identify the existing auxiliary electric cooling water pump in your vehicle's engine bay. Refer to the diagram below for a typical location within the cooling system.
  4. Disconnect Electrical Connector: Carefully disconnect the electrical connector from the old pump. The pump features an original Audi W connector type.
  5. Remove Hoses: Detach the coolant hoses connected to the old pump. Be prepared for some coolant spillage.
  6. Remove Old Pump: Unbolt and remove the old auxiliary water pump.
  7. Install New Pump: Position the new mrhello pump in place. Connect the coolant hoses securely.
  8. Connect Electrical: Reconnect the electrical connector to the new pump. Ensure a snug fit.
  9. Refill Coolant: Refill the cooling system with the appropriate coolant type and bleed any air from the system according to your vehicle manufacturer's specifications.
  10. Reconnect Battery: Reconnect the negative terminal of the battery.
  11. Test: Start the engine and check for leaks and proper operation of the cooling system.
Diagram showing the location of the auxiliary water pump (highlighted as item 39) within a complex engine cooling system, connected to various hoses and the turbocharger.

Figure 3: Engine cooling system diagram with auxiliary water pump location (item 39).

Close-up of the pump's electrical connector and wiring, showing the VW logo and part number on the connector.

Figure 4: Close-up of the pump's electrical connector.

6. Operation

The auxiliary electric cooling water pump operates automatically, controlled by your vehicle's Engine Control Unit (ECU). Its primary function is to provide additional coolant circulation, often for components like the turbocharger or for post-shutdown cooling, ensuring optimal engine temperature management. No direct user interaction is required for its operation.

7. Maintenance

To ensure the longevity and optimal performance of your cooling water pump:

  • Regularly inspect coolant levels and condition.
  • Check hoses and connections for any signs of leaks or wear.
  • Ensure electrical connections remain clean and secure.
  • Follow your vehicle manufacturer's recommended coolant flush intervals.

8. Troubleshooting

Problem Possible Cause Solution
Pump not operating / losing power Loose or faulty electrical connection. Check the electrical connector for secure fitment and inspect wiring for damage. Ensure proper voltage supply.
Excessive vibration Mounting issues or normal operation. Ensure the pump is securely mounted. Some minor vibration may be normal due to the pump's operation and rubber supports.
Coolant leak Improper hose connection or damaged pump/hoses. Verify all hose clamps are tight and hoses are properly seated. Inspect the pump body for cracks.

9. Specifications

Feature Detail
Product Name Cooling Water Pump
Model / SKU 1K0965561J
OEM NO. 1K0965561J, 1K0 965 561 J
Other Part Number 1K0965561
Material ABS PLASTIC
Voltage 12V
Placement on Vehicle Engine Auxiliary Cooling Water Pump
Origin Mainland China
Package Dimensions (L x W x H) 20 cm x 19 cm x 9 cm
Package Weight 0.378 kg

10. User Tips

Based on feedback from other users, consider the following tips:

  • Bench Test: It is advisable to bench test the pump before full installation to confirm it is working correctly.
  • Fitting Challenges: Some users have noted minor difficulties with fitting bolts into mounting holes; be prepared to adjust or configure the fitting as needed.
  • Vibration: A slight vibration might be normal for this type of pump, especially given its design with rubber supports.
  • Connector Type: The pump typically comes with an original Audi W connector, ensuring compatibility with specified vehicles.

11. Warranty and Support

For any questions regarding product functionality, installation, or potential defects, please contact the seller directly. You may also refer to the official user manual PDF for additional details, which can be found at https://manuals.plus/m/1b5e980559c8a62e8ab8a4265db7f818a294f2fbe29ddef4ba7c30e7d995a741.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.