NAMSTE 137

Contents

NAMSTE Perfume Aromatherapy Machine User Manual

Model: 137

Nano Atomization Aroma Essential Oil Diffuser for Room and Hotel Fragrance

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your NAMSTE Perfume Aromatherapy Machine. Please read this manual carefully before use and keep it for future reference. This device is designed to disperse essential oils using nano atomization technology, providing a pleasant fragrance in spaces up to 500m³.

NAMSTE Aroma Diffuser with 1 year warranty, 200ml capacity, 300-500m³ coverage, and WIFI feature

Figure 1: NAMSTE Aroma Diffuser highlighting key features.

2. Safety Precautions

To ensure safe operation and prevent damage, please observe the following:

  • Do not mix water into the essential oils.
  • Refill the essential oil promptly; avoid operating the machine without oil for extended periods.
  • Ensure the machine is free of essential oil inside the bottle during transportation to prevent damage and leakage.
  • Always keep the machine upright to prevent leakage or damage to components.
  • Tighten the oil bottle and bottle seal securely after refilling.
  • Do not attempt to repair the machine yourself. If problems occur, contact customer support promptly.
  • Clean the machine with 95% industrial alcohol every two months.

3. Package Contents

Verify that all items are present in the package:

  • Aromatherapy Machine (x1)
  • Power Adapter (x1)
  • Essential Oil Bottle (x1)
  • Key (x2)
  • Atomization Core (x1)
  • User Manual (x1)

4. Setup

4.1. Essential Oil Installation

  1. Use the provided key to unlock and open the cover of the machine.
  2. Remove the empty essential oil bottle by spinning it clockwise.
  3. Fill the bottle with your desired essential oil.
  4. Install the filled bottle back into the atomizer head by spinning it counter-clockwise until secure.
  5. Close the cover and lock it with the key.
Product explanation showing essential oil bottle, security lock, wall hanging design, and touch screen buttons

Figure 2: Key components for essential oil installation.

4.2. Power Connection

Connect the power adapter to the machine's power input and then plug it into a suitable power outlet. Ensure the power switch on the machine is in the 'off' position before connecting power.

4.3. Placement

The aromatherapy machine offers versatile placement options:

  • Stand-alone: Place the machine on a flat, stable surface.
  • Wall-mounted: Utilize the wall-hanging design on the back of the unit for secure mounting.
  • HVAC Integration: The machine can also be integrated into HVAC systems for broader coverage.
Image showing stand-alone and wall-mounted placement methods for the aroma diffuser.

Figure 3: Various placement methods.

5. Operation

5.1. Basic Controls (Touch Screen Buttons)

The machine features a touch screen interface with the following buttons:

  • Power Button: Press to turn the machine on/off.
  • UP / DOWN: Adjust values (hours, minutes, days, aroma concentration).
  • MODE: Cycle through different functions (Work Model, Atomizing frequency, Page keypad).
  • SET: Confirm settings or access sub-menus.

Quick Actions:

  • Press MODE for 5 seconds to reset the machine and WIFI model.
  • Press SET for 5 seconds to lock all keypads; press again to unlock.
  • Press the Power Button for 5 seconds to turn on/off the oil level indicator light.

5.2. Oil Level Indicator

The machine provides a visual indication of the essential oil level:

Oil Level Light Color
Greater than 50% Green
Less than 50% Blue
Less than 25% Red

5.3. Time Setting and Oil Consumption Parameter

  1. The equipment's working time is based on local time. Press SET to adjust the clock. Use UP and DOWN to change the hour, minute, and day.
  2. Press SET again to switch to the oil bottle capacity/consumption parameter. Use UP and DOWN to change this parameter. The usage days will be displayed on the LCD.

5.4. Working Mode and Atomizing Settings

Press MODE and SET to adjust various functions, including local time, 5 different groups of working periods, work/pause interval time, and aroma concentration.

  1. Setting Working Time Periods:
    • Press MODE. The LCD will show "EVENT 1 ON" (Start Time of the first group).
    • Press SET to program the setting. Use UP/DOWN to adjust hours, minutes, and working days.
    • Confirm working days by pressing ON/OFF. Days with a checkmark are selected.
    • The machine supports up to 5 working time periods. If a running time needs to span 00:00, set it as two separate time periods (e.g., 08:00-23:58 and 00:02-06:00).
  2. Setting Work/Pause Interval Time: After setting the start and off times, press MODE again. Set the aroma work/pause interval (e.g., Work 10 seconds, Pause 60 seconds).
  3. Repeat the process by pressing MODE to configure all 4 working groups.

5.5. Aroma Concentration

The atomization time can be set to: 55, 105, 155, 205, 255, 305, 355, 405, 455, 505, 3005. The pause time can be set to: 55, 105, 155, 205, 255, 305, 355, 405, 455, 505, 3005. The energy column will fluctuate during atomizing.

5.6. Smart APP Operation

The device supports smart control via a mobile application. It features a brand-new AP hotspot mode, allowing remote operation even without a direct Wi-Fi connection. For detailed instructions on connecting and using the app, please refer to the app's interface.

Video 1: Product demonstration including setup and app control.

Screenshots of the mobile application interface for smart control, including AP mode and WiFi mode.

Figure 4: Smart APP interface for remote control.

6. Maintenance

6.1. Regular Cleaning

If the equipment is not used for a long time, or for regular maintenance, 95% industrial alcohol should be used to clean the nozzle and other internal parts. It is recommended to clean the equipment with 95% industrial alcohol at least every 1-2 months.

Cleaning Procedure:

  1. Add 95% industrial alcohol into the empty essential oil bottle.
  2. Turn on the equipment and let it run for 10-15 minutes.
  3. Turn off the equipment and pour out the alcohol.
  4. Screw the bottle back into the machine.

6.2. Changing the Atomization Core

The atomization head includes the oil bottle, oil suction pipe, filter, and atomization core. To change the atomization core:

  1. Take down the oil bottle.
  2. Remove the atomizing core and pull out the suction pipe.
  3. Replace with a new atomization core and suction pipe.

7. Specifications

Feature Specification
Model 137
Bare Size W182 x D92 x H250mm (25*18.5*9cm)
Weight 2.25kg
Input Voltage 220V
Operating Voltage DC12V-1A
Power 8W
Essential Oil Capacity 200ml
Coverage Area 300-500m³
Material Metal
Color Options Black, White
Operation Mode Button, WIFI
Installation Method Flat, Wall-mounted, HVAC
Certification CE
Plug Specifications US, EU, UK, AU
Diagram illustrating the 300-500m³ fragrance coverage in a home or office environment.

Figure 5: Coverage area illustration.

Image displaying various plug specifications: US, EU, AU, UK.

Figure 6: Available plug types.

8. Troubleshooting

If you encounter any issues with your aromatherapy machine, please review the setup and operation sections. If the problem persists, do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.

9. User Tips

  • For optimal performance and longevity, ensure regular cleaning of the atomization core and oil pathways as described in the maintenance section.
  • Experiment with different essential oil concentrations and working intervals to find the perfect fragrance intensity for your space.
  • Utilize the smart APP control for convenient scheduling and remote management of your diffuser.

10. Warranty and Support

10.1. Warranty Information

A 12-month warranty is provided for new machines from the date of purchase. This warranty covers repair services and free replacement parts, excluding essential oils. The warranty is not applicable to resold or second-hand products.

To claim warranty service, you will need:

  • The warranty card.
  • Proof of purchase (invoice).

Please contact us promptly if you require service within the warranty period.

10.2. Conditions Not Covered by Free Warranty

The free warranty service does not cover damages or problems resulting from:

  • Accidents or fire.
  • Improper use or incorrect operation.
  • Repairs performed by unauthorized personnel or damage to parts.
  • Damage incurred during transportation.
  • Absence of a valid warranty card.
  • Lack of proper and regular cleaning.
  • Machine operating beyond its intended work time.
  • Use of non-original parts or machines not obtained through official channels.
  • Returning machines without prior authorization from the manufacturer.

10.3. Important Notices

  • Always read the instructions carefully before installation and keep this manual for future reference.
  • Ensure the machine is placed upright to prevent leakage and damage.
  • Do not use a damaged power cord. Verify that the power supply is suitable for the machine to prevent fire hazards.
  • Do not open or repair the machine yourself. For any issues, please contact customer support.

For further assistance, please refer to the official user manual PDF: View User Manual (PDF)

© NAMSTE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.