1. Introduction
The AZDOME Hardwire Kit OBD01 is an essential accessory for your dash cam, providing continuous power from your vehicle's OBD-II port. This kit enables advanced features like 24-hour parking monitoring, intelligent auto start-stop recognition, and low voltage protection, ensuring your dash cam operates reliably without draining your car's battery. It offers a clean, plug-and-play installation, freeing up your cigarette lighter port for other devices.
Figure 1: AZDOME Hardwire Kit OBD01 with various port options.
2. Safety Information
- Ensure the product is installed correctly to prevent damage to your vehicle's electrical system or the device.
- Do not attempt to modify or disassemble the hardwire kit.
- Keep the device away from water, moisture, and extreme temperatures.
- Consult a professional technician if you are unsure about the installation process.
3. Product Overview
3.1 What's in the Box
- AZDOME Hardwire Kit OBD01 (with selected port type: Micro USB, Mini USB, or Type C)
- User Manual (PDF available for download: User manual (PDF))
Figure 2: AZDOME Hardwire Kit OBD01 with Type C port and packaging.
3.2 Key Features
- 24H Parking Monitoring: Automatically activates parking mode for continuous surveillance when the vehicle is off.
- Intelligent Recognition of Auto Start-Stop: Prevents accidental activation of parking monitoring during brief stops (e.g., at traffic lights).
- Efficient Power Output: Delivers a maximum output current of up to 2.5A, suitable for various devices.
- Low Voltage Monitoring: Protects your car battery by automatically cutting power if the voltage drops below 11.8V.
- Quick Installation: Universal plug-and-play interface for hassle-free setup.
- Multiple Protection Features: Includes safety, input short-circuit, output high voltage, over-current, short-circuit, and over-temperature protection.
Figure 3: Key benefits of the AZDOME OBD Hardwire Kit.
Figure 4: Engineered with multiple protection features.
3.3 Compatibility
The AZDOME Hardwire Kit OBD01 is primarily designed for AZDOME dash cams, including models such as M550, M300S, M580, M560, M660, GS63Pro, GS63H Pro, and M330. It is available with Micro USB, Mini USB, or Type C output ports to match your dash cam's input.
While designed for AZDOME, some users have reported compatibility with other dash cam brands (e.g., Wolfbox G840S). However, full functionality, especially parking mode, may vary with non-AZDOME devices. Ensure your dash cam supports hardwiring for parking mode functionality.
4. Setup and Installation
4.1 Locating the OBD Interface
All passenger cars are equipped with an OBD-II interface, typically found in the lower left corner of the steering wheel, often under the dashboard or near the footwell. The exact location may vary by vehicle model and production year.
Refer to your vehicle's user manual or consult a professional technician for precise information on your car's OBD-II port location.
Figure 5: Common locations of OBD interfaces (A, B, C, D, E areas).
- A Area: Most models from General Motors, Volkswagen, Ford, Toyota, Hyundai, Citroën.
- B Area: Honda, Volkswagen Touran, imported Lexus.
- C Area: Some models from Dongfeng Citroën, Dongfeng Peugeot.
- D Area: Some models from Dongfeng Citroën.
- E Area: Very few models from other manufacturers.
4.2 Installation Steps
- Wiring: Route the cable from your dash cam's mounting location to the OBD-II port, ensuring it does not interfere with driving controls or airbags.
- Locate the OBD interface: Identify the OBD-II port in your vehicle.
- Connect the OBD cable: Plug the OBD connector of the hardwire kit firmly into your vehicle's OBD-II interface.
Figure 6: Example of an installed OBD hardwire kit in a vehicle.
Important Note:
The OBD connector can be relatively large. Be mindful of its placement to ensure it does not obstruct any covers, trims, or interfere with your legs/feet when entering or exiting the vehicle.
5. Operating Instructions
5.1 24H Parking Monitoring
Once installed, the hardwire kit enables your dash cam to automatically enter parking monitoring mode after your vehicle is turned off. This ensures continuous surveillance, recording events like collisions or motion detection, even when the car is parked.
Figure 7: 24H Parking Monitoring features.
Activation Time: Parking monitoring activates approximately 3 minutes after the vehicle is completely turned off. The OBD interface detects the ignition status as 'off' and signals the dash cam to switch to parking mode.
5.2 Intelligent Recognition of Auto Start-Stop
The hardwire kit intelligently recognizes vehicles with auto start-stop functions. This prevents the dash cam from accidentally entering parking monitoring mode during brief stops, such as at traffic lights, avoiding unnecessary recordings and alerts.
5.3 Low Voltage Monitoring
The device continuously monitors your car's battery voltage. If the battery voltage drops below 11.8V, the hardwire kit will automatically cease drawing power from the battery. This prevents excessive discharge, safeguarding your car battery and ensuring it retains sufficient charge for normal operation.
6. Maintenance
- Keep the hardwire kit and its connections clean and free from dust or debris.
- Periodically check the cable for any signs of wear or damage.
- Ensure the OBD connector remains securely plugged into the vehicle's port.
- No user-serviceable parts inside. Do not attempt to open the device.
7. Troubleshooting
7.1 Frequently Asked Questions (FAQ)
- Q: Does my car have an OBD interface? What if it doesn't fit?
- A: All passenger cars have an OBD interface, typically located in the lower left corner of the steering wheel. The OBD interface follows a global standardized protocol, so it should fit universally.
- Q: Will using this OBD cable drain my car battery?
- A: No. The OBD cable has minimal power consumption in the static state (a few microamps). It includes low voltage monitoring and will automatically stop drawing power if the battery voltage drops below 11.8V, protecting your car battery from excessive discharge.
- Q: How long does it take for parking monitoring to activate after the vehicle is turned off?
- A: It takes approximately 3 minutes. After the vehicle is completely turned off for 3 minutes, the OBD interface detects the ignition status as 'off' and signals the dash cam to activate parking monitoring.
7.2 Common Issues and Solutions
- Parking Mode Not Activating:
- Ensure your dash cam is compatible with hardwire kits for parking mode functionality. Some dash cams require specific hardwire kits or settings.
- Verify that the hardwire kit is securely connected to both the OBD-II port and the dash cam.
- Wait the full 3 minutes after turning off the vehicle for parking mode to engage.
- Check your dash cam's settings to ensure parking mode is enabled and configured correctly.
- Dash Cam Stays On Constantly (No Parking Mode):
- This indicates the dash cam is not receiving the 'off' signal from the OBD-II port or is not configured to respond to it. Review dash cam settings.
- Ensure the hardwire kit is functioning correctly. If possible, test with another compatible dash cam.
- Physical Fit Issues:
- If the OBD connector is too large or obstructs vehicle components, consider repositioning it or consulting a professional for alternative routing options.
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | OBD01 |
| Brand Name | AZDOME |
| Special Features | 24H Parking Monitor |
| Voltage Input | 5V (Standard OBD-II voltage) |
| Max Output Current | Up to 2.5A |
| Low Voltage Cut-off | 11.8V |
| Port Types | Micro USB, Mini USB, Type C |
| Package Length | 25 cm |
| Package Width | 18 cm |
| Package Height | 6 cm |
| Package Weight | 0.142 kg |
9. User Tips
- Check Dash Cam Compatibility: While the OBD01 is versatile, always confirm your specific dash cam model supports hardwiring for parking mode.
- Consider Physical Fit: The OBD connector can be bulky. Plan its placement carefully to avoid interference with vehicle trim or driver's foot space.
- Easy Installation: Many users find this a straightforward plug-and-play solution, requiring no prior hardwiring experience.
- Parking Mode Delay: Remember that parking mode activates approximately 3 minutes after the car is turned off. This is normal operation.
10. Warranty and Support
For warranty information, technical support, or further inquiries, please refer to the official AZDOME website or contact their customer service. A detailed user manual in PDF format is available for download, which may contain additional warranty and support details.
PDF User Manual: You can view or download the comprehensive user manual here.
Manufacturer Contact:
- Shenzhen Lingdu Auto Electronics Co., Ltd
- Website: www.azdome.hk
- Email: info@azdome.hk
- Address: Office-F28/23 Tevver A Lechuanghui Building No.1211, Cuan Guang Road, Longhua District, Shenzhen, China