1. Introduction
This intelligent curtain motor is an electric curtain motor designed to automate ordinary curtains. It features a built-in wireless communication module, allowing for remote control, scheduling, voice control (open/close), and intelligent linkage with other smart devices once connected to your network.

Figure 1: Product overview showing the motor, remote control, mobile app interface, and compatibility with Zigbee, WiFi, Tuya, SmartThings, Amazon Alexa, and Google Home.
2. Setup
2.1. Package Contents
- Curtain Motor (with power cord)
- Remote Control
- User Manual (including warranty certificate)
2.2. Important Installation Notes
- Ensure that the motor's locking rod is in the correct position as shown in the installation diagrams.
- The ceiling or mounting surface for the motor must be sturdy enough to safely support the entire weight of the track, motor, and curtain fabric.
2.3. Motor Installation
- Check if the pull-out lock rod is in the position shown in the diagram. If it is on the right side, first pull the pull-out lock rod while pulling it to the left side.
- Align the motor shaft with the hole position and insert it into the main transmission box.
- Pull the locking rod to the right side until the rod head falls into the right limit hole.
- The installation is complete.

Figure 2: Step-by-step diagram for installing the motor into the curtain track.
2.4. Motor Disassembly
- Pull the locking rod downwards to slide its top out of the limit hole.
- Pull the locking rod to the left side.
- Directly remove the motor.

Figure 3: Step-by-step diagram for disassembling the motor from the curtain track.
3. Operating Instructions
3.1. Remote Control Pairing
- Press and hold the motor setting button for 2 seconds until the indicator light remains on.
- Press the open button on the remote control once, and the indicator light will flash once.
- Press the P2 button on the back of the remote control again, and the indicator light will turn off to complete pairing.
Note: To clear remote pairing, you must restore factory settings.

Figure 4: The 2-channel remote control allows for easy operation, suitable for controlling multiple curtain motors.
3.2. Motor Direction Reverse
If the motor's open/close direction is opposite to the desired operation, you can reverse it:
Method 1: Using the Setting Button
- Short press the setting button once, then long press for 2 seconds until the indicator light flashes and the motor shakes slightly.
Method 2: Using the Remote Control
- Press the P2 button on the remote control once, and the motor indicator light will flash once.
- Press the P2 button on the remote control again, and the motor indicator light will remain on.
- Press the stop button on the remote control once; the indicator light will turn off, and the motor will shake at the same time.
3.3. Motor Speed Settings
The motor has three speed options (default is medium). Lowering the speed can reduce operational noise.
- Press the P2 button on the remote control once, and the motor indicator light will flash once.
- Press the P2 button on the remote control again, and the motor indicator light will remain on.
- To increase speed: Press the open and stop buttons on the remote control at the same time. The indicator light will turn off, the motor will shake, and the speed will increase.
- To decrease speed: Repeat steps 1 and 2, then press both the close and stop buttons on the remote control at the same time. The speed will decrease.
3.4. Travel (Limit) Settings
The first time the motor is powered on, it requires stroke calibration. Open and close the curtains once; the motor will automatically calibrate by hitting both ends of the track.
If abnormal blockage occurs after calibration, the motor will automatically clear the stroke. Generally, if the motor is powered off and then on again, stroke calibration is needed. To save stroke settings after power off, follow these steps:
Method 1: Using the Setting Button
- Short press the setting button twice, then long press for 2 seconds until the indicator light flashes and the motor shakes slightly.
Method 2: Using the Remote Control
- Press the P2 button on the remote control once, and the motor indicator light will flash once.
- Press the P2 button on the remote control again, and the motor indicator light will remain on.
- Press the close button on the remote control once; the indicator light will turn off, and the motor will shake at the same time.
3.5. Open Position Settings
To set a specific open position (e.g., not fully open):
- Use the remote control to move the curtain to the desired open position.
- Press the P2 button on the remote control once, and the motor indicator light will flash once.
- Press the P2 button on the remote control again, and the motor indicator light will remain on.
- Press the open button on the remote control once; the indicator light will turn off, and the motor will shake at the same time.
Note: After setting, pressing the remote open button, manually pulling the curtain open, or using the APP open button will only open the curtain to this specified position. Repeat this operation to cancel the setting.
3.6. Hand Pull Run Settings
This feature allows the curtain to automatically run to the open/close position after being pulled manually for a certain distance.
- Press the P2 button on the remote control once, and the motor indicator light will flash once.
- Press the P2 button on the remote control again, and the motor indicator light will remain on.
- Press the open and close buttons on the remote control at the same time; the indicator light will turn off, and the motor will shake slightly.

Figure 5: Gently pull the curtain to activate automatic movement.
3.7. Smart Control (Tuya App)
This product is controlled by the Tuya Smart system. Download the Tuya Smart APP and add a Zigbee gateway before use.
- Scan the QR code in the official Tuya manual or search for "Tuya Smart" in your mobile app store. Download, install, register, and log in to your account.
- To enter pairing mode: Short press the motor setting button three times in a row, then press and hold it for another two seconds until the indicator light continues to flash rapidly.
- Open the Tuya Smart APP, enter "Smart Gateway," and click "Add Sub Device."
- Wait for the device to be discovered on the search interface, then click "Finish Add."
Note: Due to continuous app updates, actual steps may vary slightly. Follow in-app instructions.
3.7.1. Removing Device from Network
Method 1: Via Tuya APP
- In the Tuya APP, enter the device page, go to the upper right corner, and select "Remove Device."
Method 2: Via Motor Button
- Short press the setting button three times, then long press for 2 seconds until the indicator light flashes rapidly. The device will be removed.
3.7.2. Device Sharing
- In the Tuya APP, enter the device page, click the icon in the top right corner, select "Device Sharing," then "Add Sharing," and add the account you wish to share with.
3.7.3. Voice Control
The motor supports various voice assistants, including Amazon Alexa, Google Home, Tmall Genie, Xiaoai Classmate, Baidu Xiaodu, JD Dingdong, and Yandex Alice.
- Connect the smart curtain motor to the Tuya Smart APP network.
- Bind your Tuya Smart account to the voice assistant's app. After synchronizing devices, you can use voice commands.

Figure 6: Hands-free voice control with compatible smart speakers like Amazon Alexa and Google Home.

Figure 7: Customize your curtain schedule through the mobile app for automated opening and closing.
4. Maintenance
- Keep the motor and track clean from dust and debris to ensure smooth operation.
- Do not use abrasive cleaners or solvents on the motor housing. Wipe with a soft, dry cloth.
- Ensure the power cord is not pinched or damaged.
5. Troubleshooting
5.1. Restore Factory Settings
Restoring factory settings will clear all remote control pairings, travel settings, and network configurations.
- Press and hold the motor setting button for 2 seconds until the indicator light is constantly on.
- Then, press and hold the motor setting button for another 5 seconds until the indicator light flashes. This indicates that factory settings have been restored.
5.2. Common Issues
- Motor not responding: Check power connection. Ensure the remote control is paired. Try restoring factory settings and re-pairing.
- Remote control not working: Ensure it's paired correctly. Check if the motor is in pairing mode.
- App connection issues: Ensure your Zigbee gateway is online and the motor is within range. Re-enter pairing mode on the motor and try adding it again in the Tuya app.
- Curtain stops unexpectedly: Check for obstructions in the track. Re-calibrate travel limits.
6. Specifications
| Parameter | Value |
|---|---|
| Model | BX82-TYZ1 |
| Wireless Protocol | Zigbee IEEE 802.15.4 |
| Rated Power | 20W |
| Rated Torque | 1.2Nm |
| Running Noise | 33dB |
| Rated Speed | 60r/min |
| Duty Cycle | S2-3min |
| Protection Level | IP40 |
| Working Temperature | -10℃ to 50℃ |
| Input Voltage | AC100-240V, 50/60Hz |
| Motor Body Size (Height) | 150mm |
| Remote Control Size (Height) | 137mm |

Figure 8: Dimensions of the motor (150mm height) and remote control (137mm height).

Figure 9: Motor specification label showing model, torque, speed, voltage, wattage, and IP rating.

Figure 10: Internal motor design highlighting intelligent noise reduction (30% reduction), 40kg running load, and over 60,000 running times.
7. User Tips
- Quiet Operation: Users frequently praise the motor for its very low noise level, often described as almost silent or masked by the curtain rail sound.
- Easy Installation: The motor is generally easy to install and detach from compatible curtain rails.
- Rail Compatibility: It has been reported to be compatible with Mamaba rails.
- SmartThings Integration: For SmartThings users, installing an Edge Driver can enable seamless integration and control without needing the Tuya app directly.
- Power Cord Length: The power cord is approximately 1 meter long. Consider using an extension cord if your power outlet is far from the installation point.
- Value for Money: Many users highlight the excellent performance for its price, making it a highly recommended product for automating curtains.
8. Warranty and Support
The after-sales service for this curtain motor product strictly adheres to local consumer protection laws and implements a three-guarantee service policy (return, exchange, repair).
8.1. Warranty Policy
During the validity period of the three guarantees, you are entitled to free return, exchange, and repair services with a valid invoice. If the product exhibits performance faults listed below, it qualifies for free service after inspection by an authorized service center.
| Service Type | Service Policy |
|---|---|
| Returns | Within 7 days from receipt due to product quality issues. |
| Exchange | Within 15 days from receipt due to product quality issues. |
| Repair | Within 2 years from receipt due to product quality issues. |
8.2. Product Performance Fault Table
- Surface cracking caused by structural or material factors.
- Indicator light failure.
- Button failure.
- Motor control failure.
8.3. Non-Warranty Regulations
The warranty does not cover:
- Unauthorized repairs, misuse, collision, negligence, abuse, liquid ingress, accidents, modifications, incorrect use of non-product accessories, or tearing/altering labels/anti-counterfeiting marks.
- Failures not listed in the Product Performance Fault Table.
- Performance faults caused by human factors.
- Third-party accessories (e.g., tracks, curtains) excluding the motor itself.
- Damage caused by force majeure.
- Products where the warranty period has expired.
For more detailed information, please refer to the official user manual PDF: View User Manual PDF