PROGAGA PG610W

Contents

PROGAGA PG610W Full HD 1080P Android Projector User Manual

Please read this manual carefully before operating your projector.

PROGAGA PG610W Projector

Image: PROGAGA PG610W Projector, a sleek silver and white device with a prominent lens.

1. Important Safeguards

Installation

  • For optimal viewing, use the projector in a dark room or with curtains drawn.
  • Handle the projector with care. Dropping or crashing it can damage components, leading to blurred images or abnormal display.

Power

  • Be cautious with the power cord; avoid excessive bending. Damage to the power cable can cause electric shock or fire.
  • Always unplug the power cord after turning off the projector.

Cleaning

  • First, unplug the power cable.
  • Clean the projector's casing regularly with a damp cloth and a neutral detergent.
  • Use a glasses cloth or lens paper to clean the lens to prevent scratches.
  • Regularly clean the projector's vents and speakers with a soft brush to ensure proper ventilation.

High Temperature Attention

  • The exhaust port can become very hot during or immediately after operation. Avoid touching it to prevent burns.
  • Do not look directly into the projector lens during operation, as it may harm your eyes.

Warm Tips

  • Do not disassemble the projector. This voids the warranty and poses a risk of electric shock.
  • Do not place liquids or heavy objects on the projector.
  • For stable heat dissipation, extend the height bracket at the bottom of the projector before use.

2. Accessories List

The following items are included in the package:

  • Remote Control ×1
  • Power Cable ×1
  • User Manual ×1
  • Lens Cap ×1

3. Projector Overview

The PROGAGA PG610W projector supports high-definition video signals and composite video signals, along with stereo audio input and output. Familiarize yourself with the projector's components:

Front and Side View

Projector Front and Side View Diagram

Image: Diagram showing the front and side views of the projector with various features highlighted.

  1. Camera (for auto focus version only)
  2. IR Receiver
  3. Lens
  4. IR for the Remote Control
  5. HDMI Port
  6. 3.5mm Port for Audio Output
  7. USB Port
  8. RJ45 Port (Ethernet)
  9. Power Socket
  10. Speaker
  11. Heat Dissipation Outlet
  12. Heat Dissipation Inlet

Top and Bottom View

The top of the projector features the power key, while the bottom includes mounting points and adjustment feet.

  1. Power Key
  2. Hanger Fixing Screw Holes (M5 nut, twisting depth ≤ 10mm) - Remove 4 foot pads for hoisting.
  3. Height Adjustment Machine Feet
  4. Bottom Label

4. Remote Control

The remote control allows you to operate all functions of your PROGAGA PG610W projector.

Remote Control Diagram

Image: Diagram of the projector's remote control with numbered buttons.

  1. Power Key
  2. Arrow Keys (Navigation)
  3. Home Key
  4. Return Key
  5. Volume+
  6. Volume-
  7. Source Key (Input Selection)
  8. Confirmation Key (OK)
  9. Menu
  10. Mute Key
  11. Focus+
  12. Focus-
  13. Screen Flip

5. Setup

Standard Setting (Projection Distance)

Adjust your picture size and distance from the lens to the screen using the table below:

Picture Size (inch)Projection Distance (m)
501.43
702.30
1002.87
1203.45
1504.29

Note: Allow ±3% variation in image sizes. If the distance is outside the min/max range, the image may be blurry.

Trapezoid Adjustment

Ensure your projector is aligned correctly for a rectangular image. Incorrect alignment will result in a trapezoidal image.

Installation Method

You can install your projector in various ways:

  • Front Projection Ceiling Mount: Projector mounted on the ceiling in front of the screen.
  • Rear Projection Ceiling Mount: Projector mounted on the ceiling behind a translucent screen.
  • Front Projection Table Mount: Projector placed on a table in front of the screen.
  • Rear Projection Table Mount: Projector placed on a table behind a translucent screen.

Warning:

  • Improper mounting can damage the projector.
  • Operate the projector between 0°C and 35°C.
  • Avoid dusty, wet, moist, or smoky environments.
  • Ensure good ventilation to prevent overheating, which can damage the projector and pose a safety risk.
  • Do not use portable bedside stands, as they may be unstable.

6. Operating the Projector

Turning On/Off

  • Power On: When connected to power, the projector is in standby (red indicator). Press the power key on the projector or remote. The indicator turns blue, and the projector starts.
  • Power Off: In working state (blue indicator), press the power key on the projector or remote. The indicator turns red, and the projector shuts down.

Image Focusing

When using the projector for the first time or if the image is blurry, adjust the focus:

  • Press the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.