1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Burhui LED Street Light. Designed for outdoor use, these lights feature high brightness LED chips, robust die-cast aluminum construction, and an IP66 waterproof rating, making them suitable for urban roads, community walkways, industrial parks, and rural roads.
Video: Product Unboxing and Features Overview
2. Safety Information
- Installation must be performed by a professional electrician to ensure correct and firm wiring.
- Do not operate the light with wet hands.
Image: Burhui LED Street Light highlighting IP66 rating.
3. Specifications
| Feature | Specification |
|---|---|
| Product Type | LED Street Light |
| Power Options | 100W, 150W, 200W |
| Input Voltage | AC85V-265V |
| Light Source | SMD 3030 LED Chip (Cool White: 6000-6500K) |
| Total Luminous Efficacy | 110-120 lm/W |
| Color Rendering (Ra) | >75 |
| Power Factor | >0.95 |
| Protection Level | IP66 (Waterproof, Sunproof, Snowproof, Windproof) |
| Body Material | Die-cast Aluminum (Excellent heat dissipation, corrosion resistance) |
| Shell Color | Gray |
| Installation Method | Self-contained, Angle Adjustable |
| Weight | 2-2.6 KG (approx.) |
| Package Dimensions | Length: 76cm, Width: 24cm, Height: 10cm |
| Certifications | CE |
Image: Dimensions and key specifications for 100W, 150W, and 200W models.
Image: Close-up of product features including 3030 LED chip, heat exchange fins, adjustable angle, and universal interface.
Image: Visual representation of the light's weather resistance (sunproof, snowproof, waterproof, windproof).
4. Package Contents
Your Burhui LED Street Light package includes:
- 1 x LED Street Light Unit (selected wattage)
- Installation accessories (e.g., screws, expansion screws)
- 1 x User Manual (this document)
5. Installation (Setup)
This product is specifically designed for outdoor street lighting. Proper installation is crucial for performance and safety.
5.1 Pre-Installation Checks
- Ensure the installation location is on a standard street light pole, unobstructed, and well-ventilated to facilitate optimal heat dissipation.
- Verify that the input voltage of your power grid matches the light's requirement (AC85V-265V).
- All wiring must be performed by a professional electrician. Ensure waterproof treatment for all wiring connections to prevent short circuits from water ingress.
5.2 Installation Methods
The LED Street Light supports two primary installation methods:
- Lamp Post Installation: Suitable for installation on rods with diameters below 8CM. Secure the light by tightening the provided screws.
- Wall Installation: Suitable for installation on relatively flat walls. Use the equipped expansion screws for secure mounting.
Image: Diagram illustrating lamp post and wall installation methods.
Image: The light features a serrated design for easy and stable angle adjustment.
5.3 Post-Installation Check
After installation, ensure the lamp is fixed firmly to prevent it from falling off due to strong wind or other weather conditions.
Image: Lighting diagram showing recommended illumination height and scope for 100W, 150W, and 200W models.
- 100W: Illumination height: 7-9m, Scope: 70-90m²
- 150W: Illumination height: 11-12m, Scope: 100-130m²
- 200W: Illumination height: 13-15m, Scope: 150m²
6. Operation
Once properly installed and wired, the LED street light will operate automatically when power is supplied. Ensure the power source is within the specified AC85-265V range. The light emits a cool white light at 6500K.
7. Daily Maintenance
- Regularly check whether the seal of the lamp housing and junction box is intact. If the sealing ring shows signs of aging or the screws are loose, replace the sealing ring and tighten the screws promptly to maintain the IP66 protection effect.
- Wipe the light-transmitting surface with a dry, soft cloth to maintain optimal brightness and light output.
8. Usage Taboos
- It is forbidden to use this product indoors or in confined spaces. It is only applicable to outdoor road lighting scenarios.
- Do not disassemble or modify the internal circuits and components of the lamp without permission. Unauthorized modifications will damage the waterproof structure and circuit safety, and may void the product quality guarantee.
- Avoid long-term contact with corrosive liquids and high-temperature heat sources to prevent damage to the housing and internal components.
9. Troubleshooting Guide
9.1 Lamp does not light up:
- Check the power connection and confirm the voltage is within AC85V-265V.
- Turn off the power, then re-toggle the switch to the corresponding gear.
- Replace the driver power supply if necessary.
9.2 Dim light or uneven brightness:
- Wipe the light-transmitting surface with a dry, soft cloth.
9.3 Lamp flickers:
- Tighten wiring and check all contacts.
- Replace the driver power supply if necessary.
- Turn off power, dry the lamp body, and check the sealing.
9.4 Water enters the lamp body:
- Immediately turn off power and dry the lamp body.
- Replace any aging sealing rings and tighten the junction box cover.
- Contact after-sales personnel for repair or replacement of the housing.
10. User Tips
- For optimal performance, ensure the light is installed in an open area to maximize light distribution and heat dissipation.
- Regular cleaning of the light surface can help maintain its luminous efficiency.
11. Frequently Asked Questions (FAQ)
- Q: What is the recommended installation height for these street lights?
- A: The recommended installation height varies by wattage. Please refer to the 'Lighting Diagram' in the Installation section for specific guidance: 100W (7-9m), 150W (11-12m), 200W (13-15m).
12. Warranty and Support
For detailed warranty information, technical support, or professional assistance, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: Burhui LED Street Light User Manual (PDF).