MatSee Plus PC473-R-W-TY

Contents

MatSee Plus PC473-R-W-TY WiFi 3 Phase Energy Monitor User Manual

Model: PC473-R-W-TY

Brand: MatSee Plus

1. Introduction

The MatSee Plus PC473-R-W-TY is a WiFi-enabled 3-phase energy monitor designed to help you track and manage power consumption in your facility. By connecting current transformer (CT) clamps to your power cables, this device can measure Voltage, Current, Power Factor, and Active Power in real-time. It also provides control over On/Off status and allows you to view historical energy data and usage trends through a mobile application.

This device is Tuya compliant and supports integration with other Tuya devices, offering a comprehensive smart home or facility management solution.

MatSee Plus PC473-R-W-TY Energy Monitor with 3 Clamp CTs
Figure 1: MatSee Plus PC473-R-W-TY Energy Monitor and three 80A Clamp CTs.

2. Safety Information

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other serious injury or damage.

  • Installation should only be performed by a qualified electrician.
  • Ensure power is disconnected at the main circuit breaker before any installation or wiring.
  • Do not exceed the specified voltage and current ratings of the device.
  • The device is designed for indoor use only.
  • Keep the device away from water, moisture, and extreme temperatures.

3. Setup

3.1 Physical Installation

The PC473-R-W-TY is designed for 35mm Din Rail mounting.

35mm Din Rail Mounting of the energy monitor
Figure 2: The energy monitor mounted on a 35mm Din Rail.

Follow the wiring diagram below for proper connection. Ensure that the circuit measured by the CT clamp is in the same phase as the circuit powered by the meter.

3 Phase electricity wiring diagram for MatSee Plus energy monitor
Figure 3: 3 Phase electricity wiring diagram. Connect the N, VA, VB, VC terminals for power supply and voltage measurement. Connect the IA+, IA-, IB+, IB-, IC+, IC- terminals to the respective CT clamps for current measurement.

3.2 App Installation and Pairing

  1. Download the Tuya Smart or Smart Life app from your smartphone's app store.
  2. Register or log in to your account.
  3. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network (5GHz networks are not supported).
  4. Power on the energy monitor. The Wi-Fi indicator on the device should be blinking, indicating it's in pairing mode.
  5. In the app, tap the '+' icon (usually in the top right corner) to add a device.
  6. The app may automatically discover the device (PC473). If not, select 'Electrical' or 'Power Meter' from the device list and follow the on-screen instructions.
  7. Enter your 2.4GHz Wi-Fi network name and password when prompted.
  8. Confirm the device indicator is blinking rapidly and proceed with pairing.
  9. Once successfully added, you can rename the device and assign it to a room.
Video 1: Demonstration of app pairing and basic features of the energy monitor.

4. Operating Instructions

4.1 Monitoring Energy Usage

After successful pairing, open the device in the Tuya Smart/Smart Life app to view the overview screen. This screen displays:

  • Total Energy Usage: Overall energy consumed (e.g., 4.18kW·h).
  • Total Energy Produced: Overall energy generated (if applicable, e.g., 13.25kW·h).
  • Phase A/B/C Energy Consumed: Individual energy consumption for each phase.
  • Phase A/B/C Energy Produced: Individual energy production for each phase.
App overview screen showing total energy usage and per-phase consumption
Figure 4: App Overview screen displaying total and per-phase energy usage.

4.2 Real-time Data (Live View)

Navigate to the 'Live' tab in the app to view real-time electrical parameters for each phase:

  • Total Active Power
  • Total Current
  • Frequency
  • Voltage A/B/C
  • Current A/B/C
  • Power Factor A/B/C
  • Active Power A/B/C
App live data screen showing voltage, current, and active power for each phase
Figure 5: Live data view in the app, showing detailed electrical parameters per phase.

4.3 Electricity Statistics (History Data)

The 'History Data' tab allows you to review energy usage and production trends over time. You can check hourly, daily, and monthly electricity consumption and production data.

App history data screen showing hourly, daily, and monthly electricity statistics
Figure 6: Electricity statistics view, showing historical data trends.

4.4 Relay Control and Scheduling

The device features a 16A dry contact output, allowing for remote On/Off control via the app. You can also set up configurable on/off schedules:

  • From the device's main screen in the app, tap the power icon to toggle the relay On/Off.
  • In the 'Settings' menu, select 'Schedule' to add or manage timed on/off events.

4.5 Power-on Status Setting

In the 'Settings' menu, you can configure the device's behavior after a power outage. The 'Power-on Status' option allows you to set it to OFF, ON, or 'Remember last status'.

4.6 Max Power Protection

The device offers overload protection. In the 'Settings' menu, under 'Max Power Protection', you can enable and set a maximum power limit for each phase. If the power consumption exceeds this limit, the device can be configured to trip the relay, protecting your connected equipment.

5. Maintenance

The MatSee Plus PC473-R-W-TY is designed for low maintenance. To ensure optimal performance and longevity:

  • Keep the device clean and free from dust.
  • Periodically check wiring connections to ensure they are secure.
  • Ensure the operating environment remains within the specified temperature and humidity ranges.
  • Regularly update the Tuya Smart/Smart Life app to access the latest features and security patches.

6. Troubleshooting

  • Device not pairing: Ensure your Wi-Fi network is 2.4GHz. Check that the device's Wi-Fi indicator is blinking rapidly. Move the device closer to your Wi-Fi router.
  • No data displayed in app: Verify all wiring connections, especially the CT clamps, are correctly installed and oriented. Ensure the device is powered on and connected to Wi-Fi.
  • Relay not responding: Check the app for any error messages. Ensure the device has a stable Wi-Fi connection.
  • Inaccurate readings: Confirm that the CT clamps are correctly installed on the appropriate phase wires and that the circuit measured by the CT is in the same phase as the circuit powered by the meter.

7. Specifications

Feature Value
Wireless Connectivity
Wi-Fi802.11b/g/n @2.4GHz
BLEBluetooth 5.2 Low Energy
RF CharacteristicsOperating frequency: 2.4GHz, Internal antenna
Physical Specifications
Operating Voltage90~250 Vac 50/60 Hz
Max. Load Current16A Dry contact
Calibrated Metering Accuracy≤ 100W Within ±2W, >100W Within ±2%
Reporting CycleEnergy data: Every 15 seconds; On/Off: Report when status changes immediately
Din Rail Height35mm
Clamp diameter (80A Split Core)10.6mm
Clamp diameter (20A Donut, optional)5.6mm
Clamp cable length (Split Core)1m (default)
Clamp cable length (Donut, optional)0.2m (optional)
Operating environmentTemperature: -20°C ~ +55°C; Humidity: ≤90% non-condensing
Weight (80A Clamp, default)52.7g
Weight (20A Clamp, optional)11.5g
Weight (Without clamp)89.5g
CertificationCE, RoHS

Dimensions

Dimensional drawing of the MatSee Plus energy monitor
Figure 7: Device dimensions (90mm height, 50mm width, 35mm depth for main unit; 45mm height, 15mm width, 22.5mm depth for CT clamps).

8. User Tips

  • Home Assistant Integration: For advanced users, this device is known to be compatible with Home Assistant via Tuya Local integration, offering more customization and automation possibilities.
  • Connectivity: Please note that this device uses Wi-Fi (2.4GHz only) for connectivity. There is no ZigBee version available for this model.
  • PDF Manual: A detailed user manual in PDF format is available for download. Refer to the seller's product page or contact support for the link.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the MatSee Plus Official Store or your point of purchase. Keep your purchase receipt as proof of purchase.

© 2024 MatSee Plus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.