Introduction
Thank you for purchasing the SEENDA Wireless Mouse Jiggler. This device combines the functionality of a comfortable wireless mouse with an undetectable mouse jiggler, designed to keep your computer active. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and a seamless user experience.
Image: SEENDA Wireless Mouse Jiggler with its accessories.
Product Features
- 2.4Ghz Wireless Connectivity: Reliable and stable connection.
- Adjustable DPI: Switch between 800, 1200, 1600, and 2000 DPI for precise control.
- Built-in Mouse Jiggler: Keeps your PC active and prevents screen timeout, 100% undetectable.
- Rechargeable Battery: Integrated 500mAh battery for long-lasting use.
- RGB Backlit: Adjustable color-changing LED lighting for enhanced aesthetics.
- Quiet Click: Designed for a silent user experience.
- Ergonomic Design: Comfortable for extended use.
- Plug & Play: Easy setup without additional drivers.
Image: Quiet Click and Adjustable DPI Levels.
Package Contents
Please check the package for the following items:
- RGB Wireless Mouse
- Charging Cable
- USB Receiver
- User Manual
Setup Instructions
1. Charging the Mouse
- Connect the mouse to a power source using the provided charging cable.
- During charging, the indicator light will be illuminated.
- The indicator light will turn off once the mouse is fully charged.
- If the indicator flashes red, the mouse lags, or the backlit turns off automatically, it indicates a low battery. Please recharge the mouse.
Image: Mouse connected for charging.
2. 2.4G Wireless Connection
- Turn on the mouse using the Power Switch located on the bottom.
- Take out the USB Receiver from its storage slot on the bottom of the mouse.
- Plug the USB receiver into an available USB port on your computer.
- The mouse should connect automatically.
Image: Mouse button layout and bottom controls.
Operating Instructions
Adjusting DPI Levels
Click the DPI/Mouse Jiggler Mode Switch button (located on the top of the mouse, below the scroll wheel) to cycle through the available DPI settings:
- 800 DPI: Indicator flashes green once.
- 1200 DPI: Indicator flashes green twice.
- 1600 DPI: Indicator flashes green 3 times.
- 2000 DPI: Indicator flashes green 4 times.
Adjusting RGB Backlit
The Light Mode Switch is located on the bottom of the mouse.
- Turn ON/OFF: Long press the Light Mode Switch for 3 seconds to turn the RGB backlit ON or OFF.
- Change Mode: Click the Light Mode Switch to cycle through different light modes.
Using the Built-in Mouse Jiggler
The DPI/Mouse Jiggler Mode Switch button is used to activate the jiggler function.
- Activate/Deactivate: Long press the DPI button for 3 seconds to turn the "Jiggler" mode ON or OFF.
- Indicator: The indicator light will be green when the Jiggler is ON, and OFF when the Jiggler is OFF.
Important Notes on Jiggler Mode:
- The jiggler function keeps your PC active without interfering with your normal cursor movements. You can still control the cursor, and it will automatically return to jiggler mode if there is no mouse movement for 5 seconds.
- In Jiggler mode, the cursor will continue to move even if the mouse enters sleep mode. To stop the movement, you must manually exit jiggler mode by long-pressing the DPI button for 3 seconds.
Image: Mouse & Jiggler 2 in 1 functionality.
Image: Benefits of the mouse jiggler for keeping your computer active.
Sleep Mode
- Standard Sleep: The mouse will enter sleep mode after 90 seconds of inactivity. The LED backlit will turn off automatically. You can wake it up by clicking any button.
- Deep Sleep: The mouse will enter deep sleep mode after 15 minutes of inactivity. All indicators will turn off automatically. You can wake it up by clicking any button.
- Note for Jiggler Mode: If the jiggler mode is active, the cursor will continue to move even in deep sleep. To stop the movement, you must long-press the DPI button for 3 seconds to turn off the jiggler.
Maintenance
- Keep the mouse clean by wiping it with a soft, dry cloth.
- Avoid exposing the mouse to extreme temperatures, direct sunlight, or liquids.
- Store the USB receiver in its designated slot on the mouse when not in use to prevent loss.
- Ensure the mouse is fully charged before extended periods of non-use to maintain battery health.
Troubleshooting
- Q: The mouse has lagging problems.
- A: Please recharge the mouse to ensure it has sufficient power to operate properly.
- Q: The mouse doesn't work.
- A: Turn off the mouse and then turn it back on. Remove the USB receiver and plug it back into your computer. If the indicator light does not illuminate, please recharge the mouse.
- Q: The mouse doesn't keep my PC on.
- A: Ensure that you have activated the Jiggler mode by long-pressing the DPI button for 3 seconds. The indicator light should be green when active.
- Q: I have turned off the mouse, but the jiggler is still on.
- A: The jiggler mode operates independently of the mouse's power state in some scenarios. To completely stop the jiggler, you must long-press the DPI button for 3 seconds to explicitly turn off the "Jiggler" mode.
- Q: Still have problems?
- A: Please contact our customer service at support@seenda.com with your order ID for further assistance. Our team aims to reply within 24 hours.
Product Specifications
| Feature | Specification |
|---|---|
| Engine | Opto-electronic |
| DPI | 800-1200-1600-2000 (Adjustable) |
| Number of Buttons | 5 |
| Weight | 108g |
| Size | 110x65x36mm |
| Battery Capacity | 500mAh |
| Wireless Range | 10m |
| Charging Time | 2-3 hours |
| Working Current (Backlit ON) | 20mA |
| Working Current (Backlit OFF) | 5mA |
| Working Time (Backlit ON) | 12.5 hours |
| Working Time (Backlit OFF) | 130 hours |
| Sleep Time | Level one sleep: 90 seconds; Deep sleep: 15 minutes |
| Compatible System | Mac OS, Windows XP-Windows 11 |
Warranty and Support
The SEENDA Wireless Mouse Jiggler comes with a comprehensive 12-month warranty from the date of purchase. If you encounter any issues or have questions regarding your product, please do not hesitate to contact our dedicated support team.
Contact Information:
- Email: support@seenda.com
- Official Website: www.seenda.com
Our customer service team is committed to ensuring your satisfaction and will respond to inquiries within 24 hours.
For a detailed digital version of this manual, you can refer to the PDF document: SEENDA Wireless Mouse Jiggler User Manual (PDF).
Image: Excerpt from the English User Manual.
Safety Warnings
IMPORTANT: To reduce the risk of fire, electric shock, or injury, please follow these safety instructions carefully.
- Safe Charging: Only use the provided charging cable. Charge the device in a well-ventilated, dry area, away from flammable materials.
- Battery Handling: Do not attempt to replace the internal lithium battery yourself. Battery replacement should only be conducted by qualified personnel to avoid hazards.
- Heat Exposure: Avoid leaving the device in high-temperature environments or in direct sunlight, as this could lead to fire hazards.
- Liquid Exposure: Keep the mouse away from water and other liquids. Do not use the device if it is wet until it has been thoroughly dried.
- Damage and Leakage: Discontinue use immediately and contact customer service if the item is damaged or if the battery shows signs of leakage.
- Correct Disposal: Follow local regulations for the proper disposal of electronic devices and batteries. Do not dispose of with household waste.
- Radio Frequency Interference: This device may cause interference with other electronic equipment. Maintain a safe distance from sensitive devices.
- Child Safety: Keep the mouse and its components out of reach of children to prevent choking or battery ingestion hazards. Never allow children to handle the item unsupervised.
CAUTION: Non-compliance with the above warnings can lead to serious injury or property damage.
User Tips
- The jiggler function is highly effective for preventing screen timeouts and maintaining an active status on your computer, especially useful for remote work.
- Many users find the mouse comfortable for daily use, appreciating its ergonomic design.
- The color-changing RGB lights add a pleasant aesthetic touch to your workspace.
- Remember that in jiggler mode, the cursor will move on its own, which is the intended behavior to keep your PC awake.
Frequently Asked Questions (FAQ)
- Q: How do I know if the mouse jiggler is active and moving the cursor?
- A: When the jiggler mode is active, the indicator light on the mouse will be green. You will also observe the cursor moving subtly on your screen without your physical input.