kakaxi B2006

Contents

Kakaxi IP65 Waterproof 6W LED Aluminum Wall Light

Model: B2006

Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new Kakaxi IP65 Waterproof 6W LED Aluminum Wall Light. Designed for both indoor and outdoor use, this surface-mounted oval light is ideal for enhancing the ambiance and safety of your garden, porch, or interior spaces. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Black oval LED wall light emitting warm light upwards and downwards.
Kakaxi IP65 Waterproof 6W LED Aluminum Wall Light (Black)

Safety Information

  • Always disconnect the power supply before installation, cleaning, or maintenance.
  • Ensure all electrical connections are secure and comply with local electrical codes.
  • Do not use corrosive detergents for cleaning.
  • This product is designed for AC 85-265V power sources.
  • Installation should be performed by a qualified electrician if you are unsure.

Package Contents

Verify that all components are present before beginning installation:

  • LED Wall Light fixture
  • Mounting bracket (bottom box)
  • Screws and wall anchors
  • Wiring connectors
Video: Unboxing and demonstration of the wall light, showing its components and how the light separates from its base.

Setup and Installation

Follow these steps carefully to install your LED wall light. Ensure the power supply is disconnected before starting.

  1. Remove Mounting Bracket: Carefully detach the bottom box (mounting bracket) from the main lamp body.
  2. Fix Bracket to Wall: Position the mounting bracket on the desired wall surface. Mark the drilling points. Drill holes, insert wall anchors (if necessary), and securely fix the bracket to the wall using the provided screws.
  3. Connect Wiring: Connect the electrical wires from your power source to the wires on the lamp body. Ensure correct polarity (Live, Neutral, Ground) according to local electrical standards. Perform a quick power test to confirm the light functions before proceeding.
  4. Install Lamp Body: Align the main lamp body with the fixed mounting bracket and secure it in place.
  5. Tighten Screws: Tighten all screws to ensure the lamp body is firmly attached to the mounting bracket and the wall.
Detailed diagram illustrating the four steps for installing the wall light, including mounting the base, wiring, installing the lamp body, and tightening screws. Also shows dimensions: 24cm height, 10cm length, 7.5cm wall distance.
Installation Diagram and Dimensions (Example shown with white light variant)

Notice:

  • Disconnect the power supply during installation.

Operating Instructions

This LED wall light operates via a standard wall switch (not included). Once installed and connected to power, simply use your existing wall switch to turn the light on or off.

The light is available in different color temperatures: Warm white (3000K), Neutral light (4000K), and Cool white (6000K). The specific color temperature of your light is determined by the model purchased and is fixed.

Maintenance

  • Cleaning: To clean the lamp, first disconnect the power supply. Use a soft, damp cloth and a non-corrosive detergent. Avoid abrasive cleaners or solvents that could damage the finish or electrical components.
  • Inspection: Periodically check the fixture for any signs of wear, damage, or loose connections.
  • Bulb Replacement: This fixture uses integrated LED lighting and does not require bulb replacement.

Notice:

  • Please disconnect the power supply when cleaning and use a non-corrosive detergent for cleaning.

Troubleshooting

Problem Possible Cause Solution
Light does not turn on No power supply; Loose wiring; Faulty switch. Check power source and circuit breaker. Verify all wiring connections are secure. Test the wall switch.
Light flickers Loose wiring; Unstable power supply. Ensure all connections are tight. Consult an electrician to check the power supply stability.
Reduced light output Dirt or debris on the diffuser. Clean the diffuser with a soft cloth and non-corrosive detergent (after disconnecting power).

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Feature Detail
Brand Namekakaxi
Model NumberB2006
Item TypeWall Lamps
Installation MethodSelf-contained (Surface Mounted)
Power SourceAC
Voltage85-265V
Wattage6W
Light SourceLED
Luminous Flux249-2000 lumens
Is Bulbs IncludedNo (Integrated LED)
Is DimmableNo
Body MaterialAluminum
FinishAluminium Baking
DiffuserTempered glass
Protection LevelIP65
Water Resistance LevelWater repellent
FeaturesWaterproof wall lamp
StyleModern Style
UseHome Lighting
OriginMainland China
CertificationCCC, CE, FCC, ROHS
LengthUp to 6.9in (approx. 17.5cm)
WidthUp to 4.9in (approx. 12.4cm)
Height8 to 11.9in (approx. 20.3cm to 30.2cm)
Weight1 to 1.9lb (approx. 0.45kg to 0.86kg)

Package Dimensions:

  • Length: 27 cm
  • Width: 12 cm
  • Height: 8 cm
  • Weight: 0.75 kg

User Tips

  • For optimal outdoor illumination, consider the placement of multiple lights to create a balanced and inviting atmosphere.
  • Regularly clean the light fixture to maintain its aesthetic appeal and ensure maximum light output.
  • Ensure the light is installed in a location where it can effectively illuminate the desired area without causing glare.

Warranty and Support

This product comes with a Three-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions regarding your Kakaxi LED Wall Light, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact information.

A user manual in PDF format is available for download: View User Manual (PDF)

Frequently Asked Questions (FAQ)

Q: Is this light suitable for all weather conditions?
A: Yes, with an IP65 protection level and water-repellent features, this light is designed to withstand various outdoor weather conditions, including rain and dust.
Q: Can I replace the LED bulb?
A: No, the LED light source is integrated into the fixture and is not designed to be user-replaceable. The LEDs have a long lifespan.
Q: Is this light dimmable?
A: No, this model is not dimmable. It operates at a fixed brightness level.
Q: What is the recommended installation height?
A: While there's no strict rule, for optimal light distribution and aesthetic appeal, consider installing it at eye level or slightly above, typically between 1.8 to 2.5 meters (6 to 8 feet) from the ground for outdoor applications.

© 2024 Kakaxi Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.