ToolkitRC Q6AC

Contents

ToolkitRC Q6AC Smart Charger User Manual

Quad Channel AC/DC Balance Charger

1. Introduction

Thank you for choosing the ToolkitRC Q6AC Smart Charger. This device is a high-performance quad-channel AC/DC balance charger designed for various battery types used in RC hobbies and other applications. It features independent charging channels, versatile power input, and multiple output options including wireless charging and USB fast charging.

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Q6AC charger. Please read it thoroughly before use.

ToolkitRC Q6AC Smart Charger front view

Figure 1: ToolkitRC Q6AC Smart Charger

2. Safety Information

  • Always operate the charger in a well-ventilated area, away from flammable materials.
  • Do not leave the charger unattended during operation.
  • Ensure correct battery polarity before connecting to the charger. Incorrect connection can cause damage to the battery and charger.
  • Use only the appropriate charging settings for your battery type and capacity.
  • Keep the charger away from water, moisture, and extreme temperatures.
  • Do not attempt to charge damaged or swollen batteries.
  • Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

  • ToolkitRC Q6AC Smart Charger
  • AC Power Cable
  • USB Cable (for firmware updates)
  • Quick Manual
ToolkitRC Q6AC Smart Charger and accessories in box

Figure 2: Q6AC Charger and included accessories

4. Setup

4.1 Power Connection

The Q6AC charger supports both AC and DC power input.

  • AC Input: Connect the provided AC power cable to the AC input port (100-240V) on the side of the charger, then plug it into a wall outlet.
  • DC Input: Connect a DC power source (7-30V) to the DC input port (XT90 connector) on the side of the charger.

Ensure the power switch is in the 'OFF' position before connecting power. After connecting, switch to 'ON'.

4.2 Output Port Configuration

The Q6AC features a unique sliding mechanism for its main output ports, allowing easy switching between XT30 and XT60 connectors without external adapters.

XT30 and XT60 output port switching mechanism

Figure 3: Easily switch between XT30 and XT60 output ports

To switch, gently slide the 'OUTPUT' cover to reveal either the XT30 or XT60 connector as needed for your battery.

5. Operating Instructions

5.1 User Interface Navigation

The charger features a clear display and a metal dial wheel for intuitive navigation. Rotate the dial to scroll through menus and press it to select options or confirm settings.

5.2 Multi-Channel Battery Charging

The Q6AC offers four independent charging channels, each capable of up to 15A output.

Four independent charging channels in operation

Figure 4: Four independent charging channels (Max 15A*4CH)

  1. Connect your battery to one of the main output ports (XT30 or XT60) and its balance lead to the corresponding balance port.
  2. On the display, select the channel you wish to configure.
  3. Choose the battery type (LiPo, LiHv, LiFe, LiIon, LTO, NiMH, Pb).
  4. Set the cell count (e.g., 1-6S for LiPo, 1-16S for NiMH, 1-10S for Pb).
  5. Set the desired charging current.
  6. Start the charging process. Monitor the battery and charger during charging.

5.3 Wireless Charging

The top surface of the Q6AC charger features a multi-protocol wireless charging pad, providing up to 15W output.

Smartphone wirelessly charging on top of the Q6AC charger

Figure 5: Multi-protocol wireless charging (15W)

Simply place your Qi-compatible device on the designated area on top of the charger to begin wireless charging.

5.4 USB Fast Charging

The Q6AC is equipped with USB-C and USB-A ports for fast charging external devices.

USB-C and USB-A fast charging ports with power ratings

Figure 6: USB-C (65W) and USB-A (30W) fast charging ports

  • USB-C Port: Provides up to 65W Power Delivery (PD) output, suitable for laptops, smartphones, and other USB-C powered devices.
  • USB-A Port: Provides up to 30W output, compatible with a wide range of USB-A devices.

Video 1: ToolkitRC Q6AC Smart Charger Features Overview

6. Maintenance

6.1 Firmware Upgrade

Keeping your charger's firmware updated ensures optimal performance and access to new features. There are two methods for upgrading the firmware:

Method 1: Automatic Upgrade

  1. Ensure the Q6AC device is powered off.
  2. Connect the charger to your computer's USB3.0 interface using the USB cable provided in the box.
  3. Your computer will recognize the charger as a U disk (e.g.,
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.