Introduction
Thank you for choosing the Aigo AK Series PC Power Supply Unit. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new power supply. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
WARNING: Improper installation or use can result in equipment damage, electric shock, or serious injury. Always follow these safety guidelines:
- Ensure the power supply is disconnected from the main power outlet before installation or maintenance.
- Do not open the power supply casing. High voltages are present inside, even when disconnected. There are no user-serviceable parts.
- Install the power supply in a well-ventilated area, away from heat sources and moisture.
- Use only the cables provided with the power supply.
- Ensure all connectors are securely attached before powering on the system.
- Equipment installation must comply with local and national electrical codes.
Package Contents
Your Aigo AK Series Power Supply Unit package should include the following:
- Aigo AK Series Power Supply Unit (500W, 600W, 700W, 800W, or 1000W model)
- AC Power Cord (EU Plug type, verify compatibility for your region)
- Mounting Screws
- Cable Ties (for cable management)
- User Manual (PDF version available online)
Specifications
| Feature | Description |
|---|---|
| Brand Name | Aigo |
| Model Series | AK Series (e.g., AK500PLUS, AK600PLUS, AK700PLUS, AK800, AK1000PLUS) |
| Rating Power Options | 500W, 600W, 700W, 800W, 1000W |
| PFC Type | PASSIVE |
| Fans | 1 (12cm HDB fan with PWM low noise) |
| Modular | Non-Modular |
| Interface Type | 20 + 4Pin (Main Power) |
| Input Voltage | 200-240Vac |
| Frequency | 50/60Hz |
| 80 PLUS Certification | Other Certification |
| Application | Desktop, Server, Mining |
| Certifications | CE, FCC, RoHS |
| Dimensions (L x W x H) | 26cm x 20cm x 12cm (approximate package dimensions) |
| Weight | 1.302 kg (approximate package weight) |
| Connector Type | Quantity (Typical) |
|---|---|
| Main Power (20+4 Pin) | 1 |
| CPU Power (4+4 Pin / 8 Pin) | 2 (8 pin x2) |
| PCI-E (6+2 Pin) | 2 (2 x8 pin + 2 x6 pin, for graphics cards) |
| SATA | 4 |
| IDE (Molex) | 3 (D-type Bus Number) |
Note: Connector quantities may vary slightly by specific wattage model. Refer to the product label for exact details.
Setup and Installation
Follow these steps to install your Aigo AK Series Power Supply Unit:
-
General Case Installation
Install the power supply at the designated location within your PC case. Use a screwdriver (typically a Phillips head) to secure the power supply in place with the provided mounting screws.
-
20+4PIN Motherboard Connection
Locate the main power cable (20+4PIN) from the power supply and connect it to the long, rectangular port on your motherboard. Ensure it clicks into place.
-
SATA HDD/SSD Connection
Use the smaller SATA power cables to connect your SATA hard drives (HDD) and solid-state drives (SSD) to the power supply.
-
6+2PIN VGA Graphics Card Connection
Connect the 6+2PIN VGA power cable(s) from the power supply to your graphics card. Modern graphics cards may require one or more of these connectors. Ensure a secure connection.
-
4PIN Lighting System Connection (if applicable)
If your system includes a lighting system that requires a 4PIN power connection, use the appropriate cable from the power supply to connect it.
-
4PIN or 8PIN CPU Power Connectors
Connect the 4PIN or 8PIN CPU power connector(s) to the corresponding port(s) on your motherboard. If your power supply does not have an 8PIN connector, a 4PIN connector can often be used for basic CPU power, but consult your motherboard manual for specific requirements.
Caution: Always ensure all connections are firm and correctly oriented before attempting to power on your system.
Operation
After successful installation, follow these steps to operate your PC with the Aigo AK Series PSU:
- Connect the AC power cord to the power supply's input socket and then to a wall outlet.
- Flip the power switch on the back of the PSU to the 'ON' (I) position.
- Press the power button on your computer case to start your system.
- To turn off your system, perform a proper shutdown through your operating system, then optionally flip the PSU power switch to the 'OFF' (O) position for complete power disconnection.
Maintenance
To ensure optimal performance and longevity of your Aigo AK Series PSU:
- Dust Cleaning: Periodically clean the fan and ventilation grilles of the power supply to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air or a soft brush. Always disconnect the power supply from the wall outlet before cleaning.
- Environmental Conditions: Operate the PSU within recommended temperature and humidity ranges. Avoid extreme conditions.
- Cable Management: Ensure cables are neatly routed and do not obstruct airflow within the PC case.
Troubleshooting
If you encounter issues with your Aigo AK Series PSU, refer to the following common problems and solutions:
- No Power:
- Check if the AC power cord is securely connected to both the PSU and the wall outlet.
- Ensure the power switch on the back of the PSU is in the 'ON' (I) position.
- Verify that your wall outlet is functioning by plugging in another device.
- Check all internal power connections (20+4PIN, CPU, GPU, SATA) are firmly seated.
- System Shuts Down Unexpectedly:
- This could indicate an overload or overheating. Ensure your system's power draw does not exceed the PSU's rated wattage.
- Check for proper ventilation within your PC case and ensure the PSU fan is not obstructed.
- The PSU features multiple protection technologies (OVP, UVP, SCP, OPP) that will shut down the unit to prevent damage in case of electrical anomalies.
- Loud Fan Noise:
- Aigo AK Series PSUs are designed with a low-noise HDB fan. If the fan becomes excessively loud, check for dust buildup and clean as described in the Maintenance section.
- Ensure no cables are obstructing the fan blades.
If problems persist, consult a qualified technician or refer to the official support channels.
User Tips
- Quiet Operation: Many users report the Aigo AK Series PSUs operate quietly, which is beneficial for a peaceful computing environment.
- Cable Length: The included cables are generally sufficient for most standard PC builds, allowing for good cable management.
- Wattage Selection: When choosing your PSU wattage, ensure it adequately supports your graphics card and other components. For high-end GPUs like an RTX 3060, verify the PSU's capacity and available PCI-E connectors.
- RGB Fan: While some models feature an RGB fan, not all wattage variants may include this. For example, the 600W version has been noted to not include RGB. Check product specifics if RGB is a desired feature.
- Power Efficiency: The Aigo AK Series PSUs carry 'Other Certification' for 80 PLUS, meaning they may not be as efficient as 80 PLUS Platinum rated units, especially at lower loads. This might result in slightly higher power consumption compared to premium PSUs.
- Fan Orientation: Typically, the PSU fan should face downwards in most modern PC cases to draw cool air from outside the case. Ensure proper orientation during installation for optimal cooling.
Warranty and Support
For detailed warranty information, technical support, or to view the complete user manual in PDF format, please refer to the official Aigo website or the provided PDF document:
The Aigo AK Series PSU is designed with multiple protection technologies, including Over Voltage Protection (OVP), Under Voltage Protection (UVP), Short Circuit Protection (SCP), and Over Power Protection (OPP), to safeguard your components.