1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your OBO HANDS F20-K TUYA Access Control System. This system offers multiple unlocking methods including WiFi/Bluetooth Tuya APP, fingerprint, RFID card, and password, designed for secure and convenient access management in various environments.
The F20-K TUYA kit is an outdoor-rated, waterproof access control keypad, suitable for homes, offices, apartments, and hotels. Please read this manual carefully before installation and use to ensure proper functionality and safety.
2. Safety Information
- Ensure all wiring is performed by a qualified professional to prevent electrical hazards.
- Disconnect power before performing any installation or maintenance.
- Do not expose the device to extreme physical shock or corrosive substances.
- Keep the device away from strong electromagnetic fields.
- Use only the specified DC12V power supply.
- Regularly check connections for security and proper function.
3. Package Contents
The contents of your kit may vary based on the specific variant purchased (e.g., Kit1, Kit2, Kit3, etc.). A typical kit includes:
- F20-K TUYA Access Control Keypad
- Power Supply Control Unit (AC90V-260V input, DC12V 3A output)
- Exit Button
- RFID Key Cards (quantity may vary)
- Optional Electric Lock (Magnetic Lock, Strike Lock, Bolt Lock, U Lock, L Lock, ZL Lock, An Lock - depending on kit)
- Mounting Screws and Accessories
- User Manual (this document and a PDF version)
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | OBO HANDS |
| Model Number | F20-K TUYA kit |
| Type | Door Access Control System Kit |
| Security Mode | Fail Safe |
| Smart Home Platform | Tuya |
| Working Voltage | DC12V |
| User Capacity | 100 fingerprints, 8000 cards |
| Unlock Mode | Tuya APP, Fingerprint, Password, RFID Card |
| WG Interface | WG26/34 input/output |
| Working Frequency | 125KHz and 13.56MHz |
| RFID Access Control Keypad | IP68 Waterproof |
| Operating Temperature | -20°C to 70°C |
| Application | Home / Office / Apartment / Hotel, etc. |
| Package Length | 21 cm |
| Package Width | 14 cm |
| Package Height | 11 cm |
| Package Weight | 1.638 kg |
5. Setup and Installation
This section outlines the general installation process. For detailed wiring diagrams and specific lock installation instructions, please refer to the included PDF manual: User manual (PDF).
5.1 Component Overview (Kit 1 Example)
The diagram above illustrates the main components: Access Control Keypad, Power Supply, Exit Button, and RFID Key Cards. The keypad is typically mounted on the exterior, the exit button on the interior, and the power supply unit near the lock mechanism.
5.2 Wiring Instructions
The access control system requires careful wiring of the keypad, power supply, exit button, and electric lock (if included). Ensure all connections are secure and correctly matched according to the wiring diagram in the PDF manual.
5.3 Physical Installation
- Mount the keypad at a convenient height near the door. Ensure it is securely fastened.
- Install the electric lock (magnetic, strike, bolt, etc.) according to its specific instructions and the door type.
- Position the exit button on the interior side of the door.
- Securely mount the power supply control unit in a protected location.
6. Operating Instructions
The system can be operated via the Tuya Smart APP or directly programmed using the keypad.
6.1 Keypad Features
6.2 How to Add Access Control Keypad to Tuya Smart APP
- Scan the QR code (usually found in the quick start guide or on the product packaging) to download the Tuya APP, or search "Tuya" in your device's App Store.
- Open the Tuya APP.
- Ensure WiFi and Bluetooth are enabled on your smartphone.
- On the access control keypad, enter:
#* 123456 # 68 #. - In the Tuya APP, click "Add Device".
- Click "Add" to confirm.
- Enter your WiFi password when prompted.
- Click "Next".
- Click "Done" to complete the pairing process.
6.3 How to Add Users with Tuya APP
Once the keypad is connected to the Tuya APP, you can manage users:
6.3.1 Add Member
- Click "Member manage".
- Click "+" to add an administrator or ordinary member.
6.3.2 Add Fingerprint
- Click "Fingerprint Add".
- Place the user's fingerprint on the keypad's sensor three times as instructed.
6.3.3 Add Password
- Click "Code Add".
- Enter a 6-digit code.
- Click "Save".
6.3.4 Add Card
- Click "Card Add".
- Swipe the RFID card on the access control keypad.
- Click "Done".
6.3.5 Add a Remote Transmitter (supports 315MHz version only)
- Click "Telecontrol Add".
6.3.6 Add Temporary Code
(Code valid for 6 hours and can only be used once)
- Click "Temporary code".
- Click "Once".
- Click "Save".
- The password can be shared via WeChat, Email, or Message.
6.4 How to Program on the Access Control Keypad (without Tuya APP)
The default programming password is 123456.
6.4.1 Add Management Card ("Add Card")
- Press
#* 123456 # 61, swipe card, press# **.
6.4.2 Delete Management Card ("Delete Card")
- Press
#* 123456 # 62, swipe card, press# **.
6.4.3 Add Remote Control (2 Methods)
- (1) Swipe management card "Add Card", then press remote control, press
# **. - (2) Press
#* 123456 # 5, then press remote control, press# **. (Note: supports 315MHz version only)
6.4.4 Add Fingerprint (3 Methods)
- (1) Swipe management card "Add Card", place fingerprint three times, press
# **. - (2) Press
#* 123456 # 5, place fingerprint three times, press# **. - (3) Press
#* 123456 # 5, input user code (10000-60000), press#, place fingerprint three times, press# **.
6.4.5 Add RFID Card (4 Methods)
- (1) Swipe management card "Add Card", swipe card, press
# **. - (2) Press
#* 123456 # 5, swipe card, press# **. (Note: For multiple cards, continue to swipe cards, then press**to exit programming). - (3) Press
#* 123456 # 5, input user code (1-8000), press#, swipe card, press# **. - (4) Press
#* 123456 # 2, input 10 digits card number, press# **.
6.4.6 Add Password
- Press
#* programming password # 3then input a 6-digit password (not starting with 0), press# **. - Example:
#* 123456 # 3 147890 # **. To unlock, input147890#.
6.4.7 Set RFID Card + Password to Unlock
- Press
#* programming password # 65, swipe card, input password, press# **. - Example:
#* 123456 # 65swipe card123123 # **. To unlock, swipe card then input123123#.
6.5 Additional Functions
6.5.1 Switch Voice Prompts to English
- Press
#* 123456 # 661 #.
6.5.2 Switch Voice Prompts to Chinese
- Press
#* 123456 # 660 #.
6.5.3 Set Keypad as an Access Controller (Reading Head Input)
- Press
#* 123456 # 631 # **.
6.5.4 Set Keypad as a Card Reader (Reading Head Output)
- Press
#* 123456 # 630 # **.
6.5.5 Set Keypad as a WG Reader
- WG26 mode:
#* 123456 # 6626 # **. - WG34 mode:
#* 123456 # 6634 # **.
6.5.6 Data Copying (Supports Card and Password Only)
- Press
#* 123456 #. The buzzer will beep twice, and the green light will illuminate, indicating entry into setting mode. - On the access control keypad B (duplicate device): Press
9 # 789 #. - On the access control keypad A (main device): Press
9 # 135 #.
6.5.7 Set Door Opening Time
- Press
#* programming password # 7then input digits from 1-9, press**. - Example:
#* 123456 # 7 2 **(1 represents 2 seconds, 2 represents 4 seconds, 9 represents 18 seconds).
6.5.8 Turn On or Off Normally Open Mode
- Press
#* 123456 # 87 # *.
6.5.9 Set Backlight Long On Mode
- Press
#* 123456 # 881 # **.
6.5.10 Set Backlight Long Off Mode
- Press
#* 123456 # 880 # **.
6.5.11 Add One-Time Password
- Press
#* 123456 # 64, input a 6-digit password, press# **.
6.5.12 Delete One-Time Password
- Press
#* 123456 # 9456 # **.
6.6 Deleting Users and Settings (without Tuya APP)
6.6.1 Delete Remote Control (2 Methods)
- (1) Swipe management card "Delete Card", press remote control, press
# **. - (2) Press
#* 123456 # 81, press remote control, press# *.
6.6.2 Delete a Single Fingerprint (3 Methods)
- (1) Swipe management card "Delete Card", place fingerprint, press
# **. - (2) Press
#* 123456 # 81, place fingerprint, press# **. - (3) Press
#* 123456 # 83, input user code, press# *.
6.6.3 Delete a Single Card (4 Methods)
- (1) Swipe management card "Delete Card", swipe card, press
# **. - (2) Press
#* 123456 # 81, swipe card, press# *. - (3) Press
#* 123456 # 82, input 10 digits card number, press# **. - (4) Press
#* 123456 # 83, input user code, press# **.
6.6.4 Delete Private Password
- Press
#* programming password # 84then input password, press# **. - Example:
#* 123456 # 84 147890 # **.
6.6.5 Delete All Cards
- Press
#* 123456 # 9 # 369 # **.
6.6.6 Delete All Fingerprints
- Press
#* 123456 # 9 # 709 # **.
6.6.7 Delete All Remote Control
- Press
#* 123456 # 9 # 147 # **.
6.6.8 Delete All Password Users
- Press
#* 123456 # 9 # 108 # **.
6.6.9 Delete All RFID Card + Password Users
- Press
#* 123456 # 9 # 258 # *.
6.6.10 Delete All Users (Fingerprints, Passwords, Cards)
- Press
#* 123456 # 9 # 123 # **.
6.6.11 Modify Programming Password
- The default programming password is 123456. To modify it, press
#* 123456 # 1then input your new 6-digit password (e.g.,456789), press# *. - Example:
#* 123456 # 1 456789 # *.
7. User Tips
- Remote Control Setup (Tuya App): For remote opening to function, ensure the administrator creates a member in the Tuya app with a linked email address immediately upon registration. Adding an email to an already created profile may not enable remote opening.
- User Addition (Apartment/Intercom): When adding users for an intercom system or apartment building, add them as participants in the intercom rather than as members of the "House" to prevent device duplication issues within the app.
- Button Recommendation: The included exit button may be noisy or perceived as unreliable. Consider replacing it with a touch-sensitive exit button for improved user experience and durability.
- Master Key Compatibility: Only 13.56 MHz RFID tags are suitable for creating a Master Key. Ensure you use the correct frequency tags for this function.
- Access Code Capacity: While specifications state high user capacity, some users have reported issues with codes being deleted after adding around 20 or more. If you encounter this, try reducing the number of stored entries.
8. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Keypad not connecting to Tuya APP |
|
| Added access codes/fingerprints/cards are deleted |
|
| Keypad does not unlock the door |
|
| Door remains open/closed after power outage |
|
| Cannot program without Tuya APP |
|
8.1 Restore Factory Settings
- To reset the programming password back to the factory default (123456) and clear all user data, press
9876543210 #. - After resetting, use the default programming password to add or delete users.
9. Maintenance
- Cleaning: Wipe the keypad surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Tuya APP for any available firmware updates for the access control keypad to ensure optimal performance and security.
- Connection Check: Regularly inspect all wiring connections for any signs of wear, corrosion, or looseness.
- Functionality Test: Periodically test all unlock methods (fingerprint, card, password, app) to ensure they are working correctly.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact OBO HANDS customer service. You can also find additional resources in the comprehensive PDF user manual: User manual (PDF).