VISHRT QWE-741

Contents

VISHRT QWE-741 Industrial Endoscope Camera User Manual

Model: QWE-741

1. Product Overview

The VISHRT QWE-741 is a high-performance industrial endoscope equipped with a high-definition color IPS screen. Designed for ergonomic use, its main function buttons can be controlled with one hand. It features a built-in 2600mAh rechargeable lithium battery, providing up to 3 hours of continuous operation. The camera cable is replaceable and available in various lengths and diameters to suit different inspection scenarios.

VISHRT QWE-741 Industrial Endoscope Camera with 4.3-inch IPS screen, 8mm lens, and 1080P resolution. The screen displays an engine inspection. Key features like 1-100M cable, 4.3 Inch IPS, and 1080P are highlighted.

Figure 1: VISHRT QWE-741 Endoscope Camera

2. Package Contents

Please check the package for the following items:

  • Endoscope Host with 4.3-inch IPS Screen
  • Camera Cable (length varies by model)
  • USB Charging Cable
  • Accessories: Hook (x1), Magnet (x1), Side Mirror (x1)
  • User Manual (this document)

Video 1: Unboxing and Initial Setup Demonstration

3. Setup

3.1 Charging the Device

  1. Connect the USB charging cable to the Type-C charging port on the endoscope host.
  2. Connect the other end of the USB cable to a 5V household charger (1A or 2A recommended). Fast charging is not supported.
  3. The device can be used while charging.
  4. If the device is not used for a long time, charge it at least once every 3 months to prevent battery damage.

3.2 Connecting the Camera Cable

  1. Locate the USB connector on the camera cable.
  2. Insert the USB connector firmly into the corresponding port on the endoscope host. Ensure a secure connection.
Split design of the endoscope showing the USB connection point for the camera cable to the main unit.

Figure 2: Split Design and USB Connection

3.3 Attaching Accessories

The hook, magnet, and side mirror accessories can be attached to the camera head for specific inspection needs. These accessories typically screw onto or clip onto the end of the camera probe.

Diagram showing how to install hook, magnet, and side mirror accessories onto the endoscope camera head.

Figure 3: Accessory Installation Guide (refer to the main product image for visual context)

4. Operating Instructions

4.1 Powering On/Off

  • Press and hold the Power button (usually marked with a power symbol) to turn the device on or off.

4.2 Camera Interface Controls

The control panel on the host unit provides the following functions:

  • Brightness Adjustment: Use the increase brightness and reduce brightness buttons (often marked with sun icons) to adjust the LED lights on the camera probe.
  • Image Mode: Press the Black and white image mode button (often marked with a half-moon or circle icon) to switch between color and black & white display.
  • Image Rotation: Use the Image Rotation button (often marked with a circular arrow) to rotate the image on the screen.
  • Zoom Function: Use the Zoom in and Zoom out buttons (often marked with magnifying glass icons) to adjust the digital zoom.
IPS Color Screen feature demonstration, showing the button to remove or restore color on the display.

Figure 4: IPS Color Screen and Color Mode Button

4.3 Performing an Inspection

  1. Power on the device.
  2. Adjust the LED brightness as needed for clear visibility.
  3. Carefully insert the camera probe into the area you wish to inspect (e.g., car engine, pipe, drain).
  4. Observe the live feed on the 4.3-inch IPS screen. Adjust image rotation or zoom as required.
  5. The optimal imaging focal length is 40-80mm. Adjust the distance from the object for the clearest picture.
Examples of endoscope use: checking a car engine and inspecting piping.

Figure 5: Widely Used Applications

5. Maintenance and Safety

5.1 Cleaning

  • After each use, clean the lens of the camera with a soft, clean cloth, preferably with alcohol, to remove any dirt, oil, or debris.
  • Keep the main unit clean and dry.

5.2 Storage

  • When not in use, store the device in a dry, cool place, away from direct sunlight and corrosive materials.
  • Ensure the battery is charged periodically (every 3 months) if stored for extended periods.

5.3 Safety Precautions

  • Do not violently hit the camera head or pull the cable forcefully.
  • When using in environments with sharp protrusions, handle the probe carefully to prevent scratching the waterproof protective layer.
  • The camera is not made of high-temperature resistant material. When inspecting car engines, ensure the engine temperature has cooled to normal operating levels.
  • Avoid contact with oil stains or other corrosive hazardous materials.

6. Troubleshooting

6.1 Product Does Not Show Pictures or Black Screen

  • Remove the camera connector and reassemble it firmly.
  • Restart the device.

6.2 Stuck on the Picture

  • Check if the product has sufficient power.
  • Restart the device.
  • Reassemble the camera connector.

6.3 Imaging Picture Not Clear

  • The best imaging focal length is 40-80mm. Adjust the distance from the object you are looking at.
  • Clean the front of the camera lens with a clean alcohol cloth.

7. Specifications

FeatureSpecification
Model NumberQWE-741
Screen Type4.3 Inch IPS Screen
Camera Diameter8mm
Resolution1920*1080P (2.0MP)
Viewing Angle70°
Lights8 LEDs
Optimal Focal Length40-80mm
Working Time3 hours
Charging PortType-C
Charging Time2 hours
Working Temperature-10°C ~ 45°C
Cable Length Options1m, 2m, 3.5m, 5m, 10m, 15m, 20m, 30m, 50m, 100m
Wire TypeHard Wire
Waterproof RatingIP67 (for camera probe)
Frame Rate30fps
CertificationsCE, FCC, RoHS

8. User Tips

  • For inspecting narrow or dark spaces, always ensure the LED lights are adjusted to provide optimal illumination without overexposure.
  • When navigating complex pipes or engines, move the camera probe slowly and carefully to avoid snagging or damaging the cable and lens.
  • Utilize the side mirror accessory for viewing angles that are not directly forward, such as inspecting the sides of a pipe or behind an object.
  • Regularly check the battery level, especially before starting a long inspection task, to avoid interruptions.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your seller or refer to the official product page. A detailed user manual in PDF format may also be available for download from the seller's website or via the following link: User Manual (PDF).

© 2023 VISHRT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.