XIAOMI MQXJQ01KL

Contents

Xiaomi Mijia Lint Remover

Model: MQXJQ01KL | Brand: XIAOMI

1. Introduction

Thank you for choosing the Xiaomi Mijia Lint Remover. This device is designed to efficiently remove lint, fuzz, and pills from your clothing and fabrics, restoring them to a fresh appearance. Please read this manual carefully before use and keep it for future reference.

2. Important Safety Instructions

To ensure safe operation and prevent damage, please observe the following:

  • Before first use, inspect the product for any visible damage or operational abnormalities. If issues are found, do not use the device and contact support.
  • Do not use the lint remover on clothing that is being worn to avoid personal injury or damage to garments.
  • Avoid using compressed air, abrasive cleaners, or corrosive liquids (e.g., gasoline, acetone) to clean the product.
  • Do not rinse the device directly with water. Keep it dry at all times.
  • Keep the device out of reach of children and individuals with reduced physical, sensory, or mental capabilities.
  • Do not continue to use the product if it is damaged, as this may cause personal injury.
  • Do not press or hit the blade cover forcefully.
  • Be careful when handling the blades during disassembly and assembly to avoid injury.

3. Package Contents

Please check that all items are present in the package:

  • Xiaomi Mijia Lint Remover
  • Micro-USB Charging Cable
  • Cleaning Brush
  • User Manual

4. Product Overview

Familiarize yourself with the components of your lint remover:

Front view of Xiaomi Mijia Lint Remover

Image: Front view of the Xiaomi Mijia Lint Remover, showing the blade cover, lint compartment, and power button area.

  • Blade Cover: Protects the blades and collects lint.
  • Blades: Internal rotating blades for lint removal.
  • Switch Button: Powers the device on/off.
  • Lint Compartment: Collects removed lint and fuzz.
  • USB Charging Port: For connecting the Micro-USB charging cable.
  • Indicator Light: Displays power status and charging status.

5. Setup and Charging

Before first use, fully charge your lint remover.

5.1. Initial Charge

  1. Ensure the device is turned off before charging.
  2. Connect the Micro-USB charging cable to the USB charging port on the device.
  3. Plug the other end of the USB cable into a compatible USB power adapter (DC5V1A, not included) or a computer USB port.
  4. The indicator light will display a white breathing light during charging.
  5. Once fully charged (approximately 2 hours), the indicator light will turn off.
  6. Disconnect the charging cable. The device is now ready for use.

5.2. Power Indicator Status

  • 15% Power: Indicator light flashes orange 3 times. The device may force shutdown if power is too low.
  • 16%-19% Power: Indicator light is solid orange.
  • 20%-100% Power: Indicator light is solid white.

6. Operating Instructions

Ensure the blade cover and lint compartment are correctly installed before turning on the device.

6.1. Turning On/Off

Press the switch button once to turn the device on. Press it again to turn the device off.

6.2. Lint Removal Techniques

Using lint remover on light and dark clothes

Image: Demonstrating the use of the lint remover on both light and dark colored fabrics without color bleeding.

  • General Trimming: Place the blade cover gently against the fabric surface. Move the device in small, gentle left-to-right motions.
  • Stubborn Lint: For more persistent lint or pills, move the device vertically or parallel to the garment's texture.
  • Woven Patterns: When trimming fabrics with woven patterns, slide the device along the direction of the pattern to avoid damage.
  • Delicate Fabrics: For thin or delicate fabrics, lay the garment flat on a hard, flat surface (like an ironing board) and gently glide the lint remover over the surface.
  • Protruding Decorations: When trimming around buttons, zippers, or other protruding decorations, slide the device carefully around these areas to avoid damage.

7. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your device.

User emptying lint compartment

Image: A user easily emptying the lint compartment, illustrating the device's user-friendly design for cleaning.

7.1. Cleaning Procedure

  1. Turn off the device and disconnect it from any power source.
  2. Gently twist and remove the blade cover.
  3. Carefully remove the blade unit by pulling it in the direction of the arrow (if applicable).
  4. Use the provided cleaning brush to remove lint and debris from the blade cover, the blades, and the working compartment.
  5. Empty the lint compartment when it is about 80% full to maintain suction efficiency.
  6. After cleaning, reassemble the blade unit and blade cover in the correct order. Ensure all parts are securely in place.

7.2. General Care

  • Wipe the body of the device with a dry, soft cloth.
  • Do not wash the device under running water. Keep it dry.
  • Store the device in a cool, dry place away from direct sunlight.

8. Troubleshooting

If you encounter any issues, refer to the table below for common problems and solutions:

ProblemPossible CauseSolution
Device does not turn on/workLow battery
Blade cover or blade not installed correctly
Blade deformed or damaged
Charge the device
Reinstall blade cover/blade securely
Replace blade (contact support)
Loud operating noiseBlade loose
Blade deformed or damaged
Reinstall blade securely
Replace blade (contact support)
Poor lint removal effectivenessNo blade installed
Blade deformed or damaged
Low battery
Lint compartment full
Install blade
Replace blade (contact support)
Charge the device
Clean lint compartment
Device not chargingCharging cable damaged
Battery damaged
Replace charging cable
Contact support

9. Specifications

FeatureDetail
Product NameXiaomi Mijia Lint Remover
Model NumberMQXJQ01KL
Power SourceRechargeable Battery
Rated VoltageDC 3.7V
Rated Power2W
Charging TimeApprox. 2 hours
Usage TypeCharging Type
OriginMainland China
StandardsGB 4706.1-2005, GB 4706.9-2008, GB4343.1-2018

10. User Tips

  • Users frequently praise the Xiaomi Mijia Lint Remover for its high efficiency in removing lint and pills.
  • For best results, ensure the fabric is laid flat and taut before trimming.
  • Regularly empty the lint compartment to maintain strong suction and prevent clogging.

11. Warranty and Support

For warranty information, technical support, or to inquire about spare parts, please refer to the official Xiaomi website or contact your local Xiaomi customer service center. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.