1. Product Overview
The Heltecbms 4S Active Balancer (Model DS0855) is designed for full-disk equalization of 4-series Lithium Polymer (LiPo) and Lithium Iron Phosphate (LiFePO4) battery packs. It features automatic low-voltage sleep and a voltage display for real-time monitoring.
This balancer can achieve a minimum voltage difference of approximately 0.01V, with a maximum equalization current reaching 5A. When the voltage difference is 0.1V, the current is about 0.5A (this value may vary based on battery capacity and internal resistance).
For battery protection, the device stops working and enters sleep mode when the battery voltage drops below 2.7V (for both ternary lithium and lithium iron phosphate types), providing over-discharge protection. The integrated display shows the total battery pack voltage and individual string voltages with a numerical accuracy of approximately 5mV.
The circuit board is treated with a three-proof paint, offering excellent insulation, moisture-proof, leakage-proof, shock-proof, dust-proof, corrosion-proof, anti-aging, and corona-resistant properties. This coating enhances circuit protection and improves the product's overall safety and reliability.
2. Technical Specifications
2.1 Main Parameters of the Display
| Name | Parameters |
|---|---|
| Number of strings | 4S |
| Battery type | NCM/LFP |
| Single string voltage range | 2V-5V |
| Measurement accuracy | 0.5% / ±5mV |
2.2 Main Parameters of the Active Balancer
| Technical indicators | Index |
|---|---|
| Product model | DS0855 |
| Applicable string number | 4S |
| Applicable battery type | NCM/LFP |
| Operating voltage range | NCM/LFP: 2.7-4.2V |
| Balance voltage accuracy | 5mV (typical) |
| Balance mode | The entire battery group participates in active balancing of energy conversion at the same time |
| Balance current | When the voltage difference is about 1V, the maximum balancing current is 5A, and the balancing current decreases as the voltage difference decreases. The minimum balancing starting voltage difference of the instrument is 0.01V. |
| Undervoltage protection sleep voltage | NCM/LFP: 2.7V |
| Static operating current | 13mA |
| Operating environment temperature | -10°C-60°C |
| External power | No external power supply is required, relying on the internal energy transfer of the battery to achieve the balance of the entire battery group. |
Additional Product Properties
- Voltage range: Low voltage non-USB (below 75V DC, below 50V AC)
- Electronic: No
- Charger included: No
- Battery Included: No
- High-concerned chemical: None
- Accessory Type: Battery Accessories
- Origin: Mainland China
- Certification: CE
3. Installation and Assembly
3.1 Description of the Connection Position
The display connection points are defined as shown in Figure 2 and detailed in Table 3.
| Number | Name | Definition |
|---|---|---|
| A | Black button | Screen sleep button (sleep/always on) |
| B- | B- | Negative pole of the first battery string |
| B-B1+B2+B3+B4+ | B1+ | Positive pole of the first battery string |
| B2+ | Positive pole of the second battery string | |
| B3+ | Positive pole of the third battery string | |
| B4+ | Positive pole of the fourth battery string | |
| C | Screen display area | Left: Single battery voltage; Right: Total voltage |
3.2 Connection Diagram
Refer to the following diagrams for proper circuit and physical connections.
4. Precautions for Use
- Adhere to Specifications: Always follow the design parameters and usage conditions. Do not violate the parameters specified in this manual, as this can damage the instrument and the battery pack.
- Correct Connection Order: When connecting, ensure the cable is connected to the battery in the order specified in the instruction manual. Only after verifying the connections should it be connected to the balancer instrument.
- Heat Management: The product generates some heat during operation. Avoid using the product in high-temperature environments to prevent overheating.
- Abnormal Situations: If any abnormal situation occurs during use, immediately stop using the device. Contact the original factory or professional maintenance personnel for repair.
- Reliability and Safety: While this product has undergone extensive reliability testing, electrical products inherently have a probability of failure. Durability can vary based on the use environment and conditions. Use the device as intended to prevent abnormal heating, smoke, fire, or other hazards caused by overload.
5. User Tips
- Why Balancing is Crucial: As battery packs age, individual cell capacities can decay inconsistently, leading to voltage imbalances. This 'battery barrel effect' can cause premature overcharge or over-discharge protection by the BMS, even if only one cell is out of balance. An active balancer mitigates this by equalizing cell voltages, reducing capacity attenuation and extending the overall lifespan of the battery pack.
- Optimal Battery Types: This balancer is specifically designed for ternary lithium and lithium iron phosphate batteries. Ensure your battery chemistry matches for optimal performance and safety.
- Understanding Current Flow: The equalization current ranges from 0-5.5A. A higher voltage difference between cells will result in a larger equalization current, which then decreases as the cells become more balanced.
- Sleep Mode for Power Saving: The balancer features a manual sleep switch. In sleep mode, the current consumption is less than 0.1mA, preserving battery life when not actively balancing.
- Recommended Capacity: For best results, it is recommended to use this balancer with battery capacities between 60-300AH.
- Under-voltage Protection: The device automatically stops balancing and enters standby mode if the voltage drops below 3.0V, protecting your battery from deep discharge.
6. Troubleshooting
- Display Not Lighting Up: Check all wiring connections, especially the main battery connections (B- to B4+). Ensure the battery pack has sufficient voltage (above 2.7V per cell for NCM/LFP).
- No Balancing Activity: Verify that the voltage difference between cells is greater than the minimum balancing starting voltage (0.01V). If the difference is too small, balancing may not initiate or may be very slow.
- Excessive Heat: While some heat is normal, excessive heat could indicate a short circuit or an overloaded condition. Immediately disconnect the balancer and inspect all connections and the battery pack for damage. Ensure the operating environment temperature is within the specified range (-10°C to 60°C).
- Inaccurate Voltage Readings: Double-check the wiring harness connections to each cell. Loose or incorrect connections can lead to erroneous readings.
- Balancer Enters Sleep Mode Unexpectedly: This typically happens if a cell voltage drops below 2.7V. Check individual cell voltages to identify any under-discharged cells.
If troubleshooting steps do not resolve the issue, or if you encounter any abnormal situations not listed here, please stop using the device immediately and contact professional maintenance personnel or the manufacturer for assistance.
7. Frequently Asked Questions (FAQ)
- Q: What types of batteries is this balancer compatible with?
- A: This balancer is compatible with 4-series Ternary Lithium (NCM) and Lithium Iron Phosphate (LFP) batteries.
- Q: Does the balancer require an external power supply?
- A: No, the balancer does not require an external power supply. It uses the internal energy transfer of the battery pack to achieve balance.
- Q: What is the minimum voltage difference required for balancing to start?
- A: The minimum balancing starting voltage difference is 0.01V.
- Q: How accurate are the voltage readings on the display?
- A: The numerical accuracy of the voltage display is approximately 5mV.
- Q: What happens if the battery voltage drops too low?
- A: The balancer has an undervoltage protection feature. It will stop working and enter sleep mode if the battery voltage (for NCM/LFP) drops below 2.7V.
8. Warranty and Support
HeltecBMS is committed to providing quality and reliable products. However, like all electronic devices, there is a probability of failure, and durability can vary based on usage environment and conditions. To ensure safety and longevity, please use the product strictly according to the instructions provided in this manual to avoid issues such as abnormal heating, smoke, fire, or other accidents caused by improper or overloaded use.
For further details, technical support, or warranty information, please refer to the official user manual PDF available at: Heltecbms 4S Active Balancer User Manual (PDF).
You can also visit the manufacturer's website for more information: www.heltec-energy.com