1. Product Overview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.

2. Important Compatibility Notice
Warning: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.

3. Specifications
| Specification | Details |
|---|---|
| Memory Type | DDR4 Server Memory (Registered ECC) |
| Available Capacities | 8GB, 16GB, 32GB |
| Available Frequencies | 2133MHz, 2400MHz |
| Voltage | 1.2V |
| Pin Configuration | 288-pin |
| Error Correction | ECC (Error Correcting Code) |
| Registered | Yes (Includes Register between DRAM and Memory Controller) |
| CAS Latency | CL15-17 (depending on frequency) |
| Form Factor | DIMM (Dual In-line Memory Module) |
| Operating Temperature | 0° C to 85° C |
| Compatibility | Server motherboards and X99 chipset motherboards only |

4. Compatible Components
Recommended Motherboards
KLLISRE Server DDR4 Memory is compatible with the following platforms:
- Server motherboards with Intel C612, C622, C236 chipsets
- X99 chipset motherboards (for Xeon processors)
- Motherboards specifically designed for Xeon E5 v3/v4 processors
- Select server/workstation platforms with DDR4 Registered ECC support
Recommended Processors
This memory is optimized for use with:
- Intel Xeon E5-2600 v3/v4 series processors
5. Memory Configuration for Optimal Performance
- Install memory in identical pairs for dual-channel operation.
- Populate memory slots according to motherboard manufacturer guidelines.
- Ensure all memory modules in a system have matching specifications for best stability.
6. Installation Guide
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components.
Power Down the System
Shut down the server completely and disconnect all power cables from the power supply.
Open the Server Chassis
Remove the server cover according to the manufacturer's instructions to access the motherboard.
Locate Memory Slots
Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
Release Retention Clips
Open the retention clips at both ends of the memory slot by pushing them outward.
Align the Memory Module
Align the notch in the memory module with the key in the memory slot to ensure proper orientation.
Install the Memory
Firmly press down on the memory module until the retention clips snap into place automatically.
Repeat for Additional Modules
If installing multiple modules, repeat the process for each module, following the motherboard's recommended population sequence.
Close the System
Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it's recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
7. Troubleshooting
System Won't Boot After Installation
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Only Partial Memory Detected
Possible causes: Improperly seated memory, incompatible memory population, faulty memory slot.
Solutions: Reseat memory modules, consult motherboard manual for proper population order, try modules in different slots.
System Instability or Crashes
Possible causes: Incompatible memory timing settings, overheating, insufficient power.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Note: If problems persist, test each memory module individually to identify potential faulty modules. Contact KLLISRE support if you suspect a defective product.
8. User Tips
- Compatibility Check: Always confirm your motherboard and CPU support DDR4 Registered ECC memory. This RAM is ideal for X99 platforms and Intel Xeon E5 v3/v4 processors.
- Dual-Channel Setup: For best performance, install memory modules in matched pairs according to your motherboard's manual to enable dual-channel mode.
- Chipset Matching: If adding to existing memory, try to match the chipset (e.g., Hynix) if possible for better compatibility, though modules from different manufacturers can often work together if specifications match.
- Capacity Configuration: When purchasing multiple modules for a specific total capacity (e.g., 32GB), verify if the order includes one 32GB stick or two 16GB sticks, as this can impact dual-channel configuration.
- BIOS Update: Ensure your motherboard's BIOS is up-to-date to ensure the best compatibility and stability with new memory modules.
9. Warranty Information
KLLISRE Server DDR4 Memory modules are covered by a one-year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation, or unauthorized modifications.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
10. Support
For warranty claims or technical support, please contact KLLISRE support with your purchase details and a description of the issue. Refer to your product packaging or the seller's website for specific contact information.