RACBOX 2" Round Side Marker Lights

Contents

RACBOX 2-inch 7 LED Side Marker Lights User Manual

Model: 2" Round Side Marker Lights

Brand: RACBOX

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your RACBOX 2-inch 7 LED Side Marker Lights. Designed for universal 12V vehicle applications, particularly trucks, trailers, tractors, pickups, and lorries, these lights function as LED marker lights, side marker lights, cab roof marker lights, clearance lights, or identification lights. Please read this manual thoroughly before use to ensure proper function and safety.

RACBOX 2-inch 7 LED Side Marker Lights installed on a truck trailer
Overview of RACBOX 2-inch 7 LED Side Marker Lights and their application on a truck/trailer.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture during installation or if not properly sealed.

3. Specifications

Attribute Value
Model Name2" Round Side Marker Lights
Item TypeTail Light Assembly
Voltage12 V
Item Diameter2 inch (70mm overall diameter, 51mm inner diameter)
MaterialPlastic-Rubber
Size of Light2" Round Shape (26mm height, 56mm base width)
LED Quantity7 LED
Color OptionsWhite/Red/Yellow
UsageLed Marker Light, Side Marker Light, cab roof marker light, clearance lights, or identification lights
FitmentUniversal for 12V Vehicles (especially truck, trailer)
ApplicationsFunctions as 2" Round Led Truck Light
High-concerned chemicalNone
OriginMainland China
Product specification diagram showing dimensions of the 2-inch LED light
Product dimensions: 70mm diameter, 51mm inner diameter, 26mm height, 56mm base width.

4. Package Contents

The package typically includes:

  • RACBOX 2-inch 7 LED Side Marker Lights (quantity varies by order, e.g., 2pcs, 4pcs, 6pcs, 10pcs)
  • Rubber grommets for flush mounting
Close-up of red, white, and yellow 2-inch LED lights
Available light colors: Red, White, and Yellow.

5. Setup and Installation

Follow these steps for proper installation:

  1. Turn off the engine and ensure the vehicle is parked safely.
  2. Open the trunk lid (if applicable) and remove any interior cover or lining behind the tail light area to access the wiring.
  3. Locate and remove the fixing nuts or bolts that secure the original tail light assembly.
  4. Unplug the wiring harness connector from the stock tail light.
  5. Carefully remove the original tail light assembly from the vehicle body.
  6. Install the new RACBOX 2-inch 7 LED Side Marker Light assembly into the mounting position correctly. Ensure a snug fit with the provided rubber grommet.
  7. Reconnect the wiring harness plug to the new light. If the light does not work, reverse the plug polarity (black wire: negative, red wire: positive).
  8. Secure the new tail light with the original nuts or bolts and reinstall any interior covers.
Diagram showing easy installation of the LED light with a rubber grommet
The lights are designed for easy flush mounting with a rubber grommet.
Wiring diagram for the LED lights: Black wire is negative, Red wire is positive
Wiring Diagram: Black wire for Negative, Red wire for Positive. Wire length is 240mm.

6. Operating Instructions

After installation, perform the following checks:

  1. Test all functions of the newly installed lights: brake light, turn signal, reverse light, and running light.
  2. Check for any gaps or loose parts to ensure a firm and stable installation.

The lights will operate automatically with your vehicle's existing lighting system once correctly wired.

Video demonstrating the RACBOX 2-inch 7 LED Side Marker Lights in operation, showcasing red, white, and yellow illumination.
Collage of various installation effects on different vehicles
Examples of the lights installed and functioning on various trucks and trailers.

7. Maintenance

These LED lights are designed for durability and require minimal maintenance. To ensure longevity and optimal performance:

  • Regularly inspect the lights for any physical damage or loose connections.
  • Clean the lens covers periodically with a soft cloth and mild soap solution to remove dirt and debris that may obstruct light output. Avoid abrasive cleaners.
  • Ensure the rubber grommets remain intact and properly seated to maintain water resistance.
  • If any LEDs fail, the entire unit may need replacement as individual LEDs are typically not serviceable.

8. Troubleshooting

If you encounter issues with your LED side marker lights, try the following troubleshooting steps:

  • Light not illuminating:
    • Check the wiring connections. Ensure the black wire is connected to negative and the red wire to positive. If unsure, reverse the polarity.
    • Verify that the vehicle's power supply to the light is active (e.g., check fuses, test with a multimeter).
    • Inspect the light unit for any visible damage.
  • Flickering light:
    • Ensure all connections are secure and free from corrosion.
    • Check for stable voltage supply from the vehicle.
  • Water inside the lens:
    • Ensure the rubber grommet is correctly installed and sealed around the light.
    • If water ingress persists, the unit may be faulty or improperly installed.

If these steps do not resolve the issue, contact customer support.

9. User Tips

  • For optimal visibility, consider installing lights in a symmetrical pattern on your vehicle.
  • When replacing multiple lights, it's often easier to replace them in pairs to ensure consistent brightness and color.
  • Always use appropriate tools and wear safety gear during installation.

10. Manufacturer & EU Representative Information

  • Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com
  • EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com

11. Compliance Information

This product is an auxiliary accessory for automotive lighting and is only used for the normal replacement and upgrade of the original car lights, not for illegal modification or illegal use. The products meet the relevant national automotive lighting industry standards, and have undergone strict quality testing before leaving the factory, and are qualified to leave the factory.

12. Additional Resources

For a downloadable PDF version of this user manual, please refer to the following link: User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.