1. Product Overview
The NJTY YS-728L is a multifunctional digital stopwatch designed for various timing needs, including sports, daily activities, and educational purposes. It features a large LCD display with backlight, offering stopwatch, countdown timer, alarm, and clock functions.
Key Features:
- Clock Calendar: 24-hour system, covering years 2000-2099.
- Alarm Function: Daily alarm with a 30-second sound duration.
- Stopwatch Function: Maximum timing of 39 hours, 59 minutes, 59 seconds with 0.01-second accuracy.
- Countdown Function: Maximum timing of 39 hours, 59 minutes, 59 seconds, with recyclable and adjustable reminder duration.
- Hourly Chime: Integral point announce function.
- Backlight: Illuminates for 4 seconds with each press of the LIGHT (Y) key.
- Power-off: Device can be shut down when not in use, retaining memory of settings.
- Mute Function: Key sounds can be turned on or off.
2. Setup
2.1 Battery Installation/Replacement
The stopwatch uses a CR2032 button cell battery. If the device does not power on or the display is dim, the battery may need to be installed or replaced. Please note that some units may arrive with a dead battery, requiring replacement before first use.
- Locate the battery compartment on the back of the stopwatch.
- Using a small screwdriver, carefully remove the screws securing the back cover. There may be several small screws (typically around 7-8).
- Gently open the back cover and remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Carefully replace the back cover and secure it with the screws. Ensure all screws are tightened to prevent gaps, though note that the device is not waterproof.
2.2 Initial Power On/Off
- Power On/Off: In Clock mode, press and hold the [M] key for 3 seconds to turn the device on or off.
2.3 Setting Time and Date
To set the current time and date:
- Ensure the stopwatch is in Clock mode (the default mode, indicated by the time display).
- Press and hold the [L] key for approximately 1 second to enter the time setting state. The hour digit will start flashing.
- Press the [S] key to increase the value of the flashing item. Press and hold [S] for rapid value increase.
- Press the [L] key to shift to the next setting item in the sequence: Hour → Minute → Second → Month → Day → Week. (Note: The second digit is directly cleared when shifting to it).
- Once all settings are complete, press the [M] key to save the set values and exit setting mode.
- To check the time and date, press the [S] key in Clock mode to switch between time and date display.
3. Operating Instructions
3.1 Button Functions
The stopwatch has four main buttons:
- [M] (MODE): Cycles through different operating modes (Clock, Stopwatch, Countdown, Alarm).
- [L] (LAP/SET/RESET): Used for lap timing, entering/shifting settings, and resetting values.
- [S] (START/STOP/SELECT): Used to start/stop timing, select values in setting mode, and turn alarm on/off.
- [LIGHT] (Y): Activates the backlight.
3.2 Mode Switching
From any mode, press the [M] key to cycle through the following modes:
- Clock Mode: Displays current time and date.
- Stopwatch Mode: Indicated by a running man icon on the left side of the display.
- Countdown Mode: Indicated by an hourglass icon on the left side of the display.
- Alarm Mode: Indicated by a bell icon and flashing day abbreviations (WE).
3.3 Stopwatch Function
To use the stopwatch:
- Press [M] once to enter Stopwatch mode.
- Normal Timing:
- Press [S] to start timing.
- Press [S] again to stop/pause timing.
- While paused, press [L] to clear the record to 0:00:00.
- While paused, press [S] again to resume accumulative timing.
- Split Timing:
- Press [S] to start timing.
- Press [L] to pause the first group of timing. The display will show the time for the first split.
- Press [L] again to display the timing process time of the second group. Repeat for subsequent splits.
- Press [S] to stop the overall timing.
- While stopped, press [L] to clear the records.
3.4 Countdown Function
To use the countdown timer:
- Press [M] twice to enter Countdown mode.
- Press and hold the [L] key for 1 second to enter the setting state. The hour digit will flash.
- Press the [S] key to increase the value of the flashing item. Long press [S] for rapid value increase.
- Press the [L] key to shift the setting item in the sequence: Hour → Minute → Second → Single Countdown (C1) → Cycle Countdown (S1) → Reminder Duration.
- After setting, press the [S] key to start the countdown.
- Press [S] to pause the countdown.
- While paused, press [L] to reset the countdown.
- If the countdown is not started or is under pause, press [L] and [S] simultaneously to clear the records.
- Upon completion of a single countdown, an alarm will sound, and the device will start a positive count-up. Press any key to stop the alarm.
- For cycle countdowns, the next countdown will automatically begin after the previous one ends.
3.5 Alarm Clock Function
To set and use the alarm:
- Press [M] three times to enter Alarm mode. The day abbreviations (WE) will flash.
- Press and hold the [L] key for 1 second to enter the time setting state. The hour digit will flash.
- Press the [S] key to increase the value of the flashing item. Long press [S] for rapid value increase.
- Press the [L] key to shift the setting item: Hour → Minute.
- After setting, press the [M] key to save the values.
- Press the [S] key to turn the alarm on or off. When the alarm is on, a bell icon and "on" will be displayed in the lower right corner.
3.6 Hourly Chime Function
To turn the hourly chime on or off:
- In Clock mode, press [L] and [S] simultaneously.
3.7 Backlight
To activate the backlight:
- Press the [LIGHT] (Y) key. The display will illuminate for 4 seconds.
3.8 Mute Function
To turn key sounds on or off:
- In Clock mode, press and hold the [S] key for 3 seconds. When muted, a mute icon will be displayed.
4. Maintenance
4.1 Cleaning
Wipe the stopwatch with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the casing or display.
4.2 Storage
Store the stopwatch in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, consider removing the battery to prevent leakage.
4.3 Battery Replacement
Refer to section 2.1 for detailed instructions on battery replacement. It is recommended to use a high-quality CR2032 battery for optimal performance.
5. Troubleshooting
- Device does not power on or display is dim: The battery may be dead or improperly installed. Refer to section 2.1 for battery replacement.
- Buttons are unresponsive or pressed unintentionally: Ensure buttons are pressed firmly and intentionally. Avoid placing the stopwatch in positions where buttons might be accidentally activated.
- Water damage: IMPORTANT: This stopwatch is NOT waterproof. Despite some descriptions, user experience indicates it cannot withstand water exposure. Avoid contact with water, rain, sweat, or splashes. Any water exposure may lead to malfunction and is not covered by warranty.
- Alarm not sounding: Check if the alarm function is enabled (bell icon and "on" displayed). Ensure the device is not in mute mode.
- Incorrect time/date: Re-enter the time and date settings as described in section 2.3.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | NJTY |
| Model Number | YS-728L (Digital Stopwatch) |
| Theory | Digital |
| Type | Mini |
| Use | Multifunctional |
| Origin | Mainland China |
| Battery Type | CR2032 (Button Cell) |
| Stopwatch Accuracy | 0.01 seconds |
| Max Timing Duration | 39 hours, 59 minutes, 59 seconds (Stopwatch & Countdown) |
| Clock System | 24-hour, 2000-2099 calendar |
| Alarm Duration | 30 seconds |
| Backlight Duration | 4 seconds per press |
| Package Length | 17 cm |
| Package Width | 12 cm |
| Package Height | 3 cm |
| Package Weight | 0.06 kg |
7. User Tips
- Mute Key Sounds: If you prefer silent operation, remember to use the mute function by holding the [S] key for 3 seconds in Clock mode.
- Power Off to Save Battery: The stopwatch can be turned off while retaining all settings. Hold the [M] key for 3 seconds in Clock mode to power it down.
- Check Battery on Arrival: Some users have reported receiving units with dead batteries. If your stopwatch doesn't work out of the box, consider replacing the CR2032 battery.
- Handle with Care: Be mindful of accidental button presses, especially if carrying the stopwatch in a pocket or bag.
- Avoid Water: Despite some product descriptions, this stopwatch is NOT waterproof. Keep it away from water, rain, and excessive moisture to prevent damage.
8. Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download. You can access it via this link: User manual (PDF). This PDF contains additional diagrams and detailed instructions that may be helpful.