1. Introduction
This manual provides detailed instructions for the safe and effective use of your NAMSTE Scent Air Machine. Please read all instructions carefully before operation and retain this manual for future reference.
The NAMSTE Scent Air Machine is an intelligent essential oil diffuser designed for home and commercial use, offering a coverage area of 300-400m³. It features smart control options via Bluetooth and WiFi, allowing for customizable scent diffusion schedules.
Figure 1: NAMSTE Scent Air Machine with WiFi and Bluetooth control.
2. Safety Precautions
Warning: Failure to follow these instructions may result in electric shock, fire hazard, personal injury, or property damage.
2.1. Installation Precautions
- Ensure the device is installed on a firm surface or wall.
- Install the device in a well-ventilated and adequate space.
- Do not install the device where children can reach it.
- Do not install the device where it cannot bear weight or is prone to falling.
- Do not tilt the device.
- Keep the device away from fire and heat sources. Do not store flammable or explosive materials near the device.
- The housing material is not resistant to corrosion, except for the atomizer.
- Do not use the device in high temperature or wet environments.
2.2. Operation Precautions
- Do not block the sprayer by hand or other obstructions when the device is working.
- Do not spill water or conductive, corrosive liquid on the device surface or allow it to fall inside the device.
- Do not operate the device without stopping for extended periods. Suggested average daily usage time should not exceed 14 hours, and the second level of intensity is recommended.
- Cut off the power in extreme weather conditions.
- Do not use inflammable, explosive, corrosive, or other hazardous solvents with the device.
- Do not mix essential oil with water for use in the diffuser.
3. Product Overview
3.1. Components
Figure 2: Unboxing the NAMSTE Scent Air Machine and accessories.
The package typically includes:
| Item | Quantity |
|---|---|
| Aroma diffuser | 1 PC |
| Adapter | 1 PC |
| Cap | 1 PC |
| Air conditioning tube | 1 PC |
| Key | 2 PC |
| Connector | 1 PC |
| Screws (including plastic expansion tube) | 2 PC |
| Manual | 1 PC |
| Warranty card | 1 PC |
| Bottle sealing gasket | 1 PC |
3.2. Specifications
| Feature | Specification |
|---|---|
| Brand Name | NAMSTE |
| Certification | CE |
| Bare Metal Size | 170*81*206mm |
| Capacity | 300ml |
| Material | PP plastic |
| Voltage | DC12V-1A |
| Power | 7.2W |
| Noise Level | <38dba |
| Color Options | Black, White |
| Operation Modes | Buttons, WiFi, Bluetooth |
| Installation Options | Flat, Wall-mounted |
| Coverage Range | 300-400m³ |
| Plug Types Available | US, EU, UK, AU |
Figure 3: Diffuser coverage area.
Figure 4: 300ml large capacity bottle.
Figure 5: Available plug types.
4. Setup
4.1. Wall Mounting
The device can be wall-mounted using the provided screws and plastic expansion tubes. Ensure the installation area is firm and can bear the device's weight.
Figure 6: Wall hanging holes on the back of the device.
4.2. Filling Essential Oil
- Use the provided key to unlock the top cover of the diffuser.
- Remove the empty essential oil bottle or the existing bottle.
- Carefully pour your desired essential oil into the bottle. Do not mix essential oil with water.
- Place the bottle back into the diffuser and secure the top cover with the key.
Video 1: Demonstrates unlocking the device, removing the bottle, filling essential oil, and reassembling.
4.3. HVAC Connection (Optional)
The device can be connected to air conditioning ducts for wider scent distribution. Use the provided air conditioning tube and connector for this setup. Ensure all connections are secure.
Figure 7: Diffuser connected to HVAC system.
Figure 8: Diffusion mechanism and 360° air circulation.
5. Operation
The device can be controlled via its physical buttons or through the "Aroma Link" mobile application (available for iOS and Android).
5.1. Button Functions
The device has four buttons: BACK, ENT, ▲ (Up), and ▼ (Down).
- ▲ (Up): Increasing button.
- ▼ (Down): Decreasing button.
- BACK: Return button.
- ENT: Confirmation button.
5.2. Basic Settings via Buttons
- Setting Working Time and Frequency: From the normal working interface, press ENT to enter the working time and frequency setting interface.
- Turning Fan On/Off: From the normal working interface, long press ▲ to turn on/off the fan.
- Turning Machine Off: From the normal working interface, long press ▼ to turn off the machine.
- Setting Local Time: From the normal working interface, press BACK and ENT buttons at the same time to enter the local time setting interface.
5.3. App Control (Bluetooth & WiFi)
Download the "Aroma Link" app by scanning the QR code provided in the manual or on the product packaging. The app allows for intelligent control, including setting working periods, intensity, and scheduling.
Figure 9: Intelligent control via Bluetooth and WiFi app.
Figure 10: Scan QR codes to download the "Aroma Link" App.
The video demonstrates connecting via Bluetooth and setting working periods (Work seconds / Pause seconds) through the app.
Video 2: Demonstrates app control for setting diffusion schedules.
6. Maintenance
Regular cleaning ensures optimal performance and longevity of your device.
6.1. Cleaning
- Clean the equipment periodically, ideally every 2-3 months.
- Always turn off and unplug the device before cleaning. Do not operate with wet hands to avoid electric shock or injury.
- Clean the filter components.
- For the atomizer, if it's blocked, soak it in alcohol for a few minutes or use a fine needle to clear it.
6.2. Long-Term Storage
- Turn off and unplug the device, then roll up the power cord.
- Clean the filter components.
- Place a deodorant package containing activated carbon inside the device or its packaging to prevent residual substances from producing odors.
- Equip the machine with a dust cover and store it in a shaded, ventilated place.
7. Troubleshooting
If you encounter any issues, refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| The PCB cannot work | PCB damage | Change the PCB. |
| Battery is dead | Replace the battery. | |
| Poor welding/insensitive contact | Replace the PCB. | |
| Power cut off | Check the adapter and power cable. | |
| Equipment does not work, but PCB display is normal | Pump system is broken | Change the pump. |
| Time setting error | Check the time setting. | |
| Inner circuit problems | Check the inner circuit (multimeter). | |
| Abnormal Noise | Pump is broken, aged, or loose | Adjust or change the pump. |
| Trachea cable connection problems | Check the cable connection. | |
| Internal structure is damaged | Adjust or change parts. | |
| Machine works but no scent or scent is weak | Nozzle is blocked | Clean the nozzle (soak in alcohol or use a fine needle). |
| Pipette falls off | Reconnect the pipette. | |
| Pump system is aged | Change the pump. | |
| Atomizer is blocked | Clean the atomizer. | |
| Impurities in the essential oil | Replace with pure essential oil. | |
| Oil Leakage | The equipment is tilted | Place the machine straight. |
| The atomizer leaks | Change a new atomizer. |
8. User Tips
- The device is generally easy to install and operate, both via buttons and the mobile app.
- For optimal scent diffusion, the quality and type of essential oil used can significantly impact the perceived strength of the aroma.
- Bluetooth connectivity is often reported as straightforward, while some users may experience initial challenges with WiFi setup.
- The device is capable of covering a good area, but individual perception of scent strength may vary.
9. Frequently Asked Questions (FAQ)
- Q: What app is used to control the device?
- A: The device is controlled by the "Aroma Link" app, available for both iOS and Android devices.
- Q: Is the device compatible with Tuya or SmartLife apps?
- A: The official app for this device is "Aroma Link". Compatibility with third-party smart home platforms like Tuya or SmartLife is not officially stated.
- Q: Does this device come with wall mounting accessories?
- A: Yes, the package includes screws and plastic expansion tubes for wall mounting.
- Q: Do you sell replacement parts like the valve or spray head?
- A: For replacement parts, please contact customer support or the seller directly for availability.
- Q: Do you sell essential oil for the machine?
- A: Essential oils are typically sold separately. Please check with the seller or reputable essential oil suppliers.
10. Warranty and Support
10.1. Warranty Period
The equipment warranty period is 12 months, calculated from the date of sale.
10.2. Free Maintenance Eligibility
To enjoy free maintenance services, you must provide the warranty card, invoice, or other proof that the equipment was purchased from our company.
10.3. Warranty Exclusions
Faults caused by human error or improper operation are not covered under warranty and will not be eligible for free maintenance.
10.4. Technical Support
We provide free technical solutions and guidance for the installation process. For online FAQ consultation and scent-marketing suggestions, please contact our support team.
For further assistance, please refer to the contact information provided with your purchase or on the official NAMSTE website.