Sweideer Knob Switch with LED / no LED

Contents

Sweideer 22mm Selector Knob Switch User Manual

Model: Knob Switch with LED / no LED

Brand: Sweideer

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Sweideer LA155 Series 22mm Selector Knob Switch. This versatile switch is available in various configurations, including LED illuminated and non-illuminated versions, with 2 or 3 positions, and self-locking or momentary actions. It supports multiple contact types (1NO, 2NO, 1NO1NC) and a wide range of voltages.

Please read this manual thoroughly before installation and use to ensure safe and proper operation.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the product:

  • Ensure power is disconnected before installing, wiring, or performing any maintenance on the switch.
  • Verify that the voltage and current ratings of the switch match your application requirements.
  • Installation should be performed by qualified personnel in accordance with local electrical codes and regulations.
  • Do not expose the switch to environments beyond its specified IP65 rating (e.g., prolonged submersion).
  • Avoid using excessive force when operating the switch or disassembling components.

3. Specifications

Feature Specification
Brand Name Sweideer
Model Number Knob Switch with LED / no LED
Item Type SWITCHES
Switch Type Knob switch
Opening Diameter 22MM
Current Rating 10A
Voltage Available 12V, 24V, 220V, 110V, 380V, 36V, 48V
Material Plastic
Features Self locking/Momentary Self Reset
Button Contact 1NO/2NO/1NO1NC
Illuminated Color Red, Blue, Green, White, Yellow
Knob Position 2 position / 3 position
Contact Material Silver contact
No Light Knob Switch Head is black
Certification CE, CCC
Origin Mainland China
Dimensions of the 22mm Knob Switch
Figure 1: Dimensions of the 22mm Knob Switch, including opening diameter, total height, and body dimensions.

4. Setup and Installation

The Sweideer LA155 Series Push-button Switch is designed for easy assembly and customization. Follow these steps for installation and contact block management.

4.1 Contact Block Assembly and Disassembly

The switch can accommodate 1 to 6 contact modules (NO/NC contacts). Contact blocks can be easily added or replaced.

  1. To attach a contact block: Align the contact block with the designated slot on the switch body and push firmly until it clicks into place.
  2. To detach a contact block: Use a flat-head screwdriver to gently pry open the yellow card slot on the side of the contact block, then pull the contact block away from the switch body.
Video 1: Demonstration of switch operation, contact block assembly, and LED replacement. (Relevant section: 1:25-1:44 for assembly/disassembly)

4.2 LED Wick Replacement (for illuminated models)

The LED wick can be replaced to change the illumination color or voltage.

  1. Push the yellow card piece inwards while simultaneously pulling off the head of the switch.
  2. Gently twist and pull out the existing LED wick.
  3. Insert the new LED wick, ensuring it is properly seated.
  4. Reattach the switch head.
Video 2: Demonstration of switch operation, contact block assembly, and LED replacement. (Relevant section: 2:00-2:13 for LED replacement)

4.3 Wiring Diagrams

Refer to the diagrams below for proper wiring of different contact types.

Wiring diagram for 1NO, 1NC, LED wick connections
Figure 2: Wiring diagram illustrating connections for 1NO (Normally Open) and 1NC (Normally Closed) contacts, and the LED wick.
Diagram showing contact behavior for 1NO 1NC, 2NO, and 1NO contact types
Figure 3: Diagram showing contact behavior for 1NO 1NC, 2NO, and 1NO contact types when the knob is turned or not turned.

5. Operating Instructions

The switch offers various operating modes depending on the model purchased:

5.1 Knob Switch Operation

  • 2-Position Self-locking: Turn the knob to the desired position (left or right) to activate. The knob will lock in place. To deactivate, turn the knob again to the original position.
  • 2-Position Momentary (Self-reset): Turn the knob to the desired position. The switch will activate as long as the knob is held. Upon releasing the knob, it will automatically return to the center position.
  • 3-Position Self-locking: Turn the knob to the left or right position to activate. The knob will lock in place. To return to the center (off) position, turn the knob to the center.
  • 3-Position Momentary (Self-reset): Turn the knob to the left or right position. The switch will activate as long as the knob is held. Upon releasing the knob, it will automatically return to the center position.
Video 3: Demonstration of 2-position and 3-position self-locking and momentary knob switch operations. (Relevant sections: 0:00-0:45)

5.2 Push-button Switch Operation (if applicable)

  • Momentary (Self-reset): Press the button to activate. The switch will activate as long as the button is held. Upon releasing the button, it will automatically return to its original position.
  • Self-locking: Press the button once to activate. The button will lock in the pressed position. Press the button again to deactivate, and it will return to its original position.
Video 4: Demonstration of momentary and self-locking push-button switch operations. (Relevant sections: 0:45-1:25)

5.3 Contact Functionality

  • NO (Normally Open) Contact: In its normal (off) state, the circuit is open. Turning the knob or pressing the button closes the circuit (powers on).
  • NC (Normally Closed) Contact: In its normal (on) state, the circuit is closed. Turning the knob or pressing the button opens the circuit (powers off).

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the switch. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the internal components.
  • Inspection: Periodically check all wiring connections to ensure they are secure. Inspect the switch for any signs of physical damage, wear, or corrosion.
  • Environmental Protection: The switch has an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. Ensure the installation environment respects these limits to maintain its integrity.

7. Troubleshooting

  • Switch Not Responding:
    • Check all wiring connections for looseness or incorrect placement.
    • Verify that the power supply to the switch is active and within the specified voltage range.
    • Ensure the correct contact block type (NO/NC) is used for the desired function.
  • LED Not Illuminating (for illuminated models):
    • Confirm that the LED wick is correctly installed and not damaged.
    • Check the voltage supplied to the LED wick; it must match the LED's rated voltage.
    • Ensure the switch is in the 'on' position if the LED is wired to indicate active status.
  • Switch Feels Stiff or Loose:
    • Ensure the mounting nut is tightened appropriately.
    • If the issue persists, the internal mechanism might be worn or damaged, requiring replacement.

8. User Tips

  • When installing multiple contact modules, ensure they are securely attached to prevent intermittent operation.
  • For applications requiring frequent changes in switch function, consider having spare NO and NC contact blocks readily available.
  • Always double-check the wiring against the provided diagrams, especially when dealing with different voltage requirements for the LED and the main circuit.

9. Warranty and Support

This Sweideer Selector Knob Switch comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the official Sweideer customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.