1. Introduction
This product is a high-power LED lamp bead chip designed for various lighting scenarios. It features high brightness, low energy consumption, and a long lifespan. These versatile LED chip light panels are suitable for a range of applications, including garden lighting, street lighting, and DIY floodlight projects.
Our LED chips are engineered to provide high-performance lighting, with lumen output ranging from 1,000 to 10,000 lumens, depending on the selected power option. They are designed for durability and efficient heat dissipation, making them a reliable solution for outdoor lighting.
2. Warning & Safety Information
- Adult Supervision: This product must be used under direct adult supervision.
- No Self-Disassembly: Unauthorized personnel are not allowed to attempt self-repair. Disassembly is prohibited.
- Environmental Conditions: Do not use this product in humid or high-temperature environments.
- Eye Protection: Avoid direct eye exposure to the LED beam.
- Power Disconnection: Always cut off the power supply before installation or maintenance to prevent electric shock.
3. Installation & Usage Instructions
3.1. Preparation
- Ensure that the power supply voltage and current meet the product specifications for your chosen LED chip wattage.
- For 100W LED chips, two 50W drivers are required.
- For 150W LED chips, three 50W drivers are required.
3.2. Installation Work
- Make sure the connected power supply is completely disconnected from the mains.
- Install the LED lamp beads firmly in the appropriate position within your fixture.
- Connect the LED chip to the compatible power supply, ensuring correct polarity (V+ to positive, V- to negative).
- Once connected, the LED chip can be used normally.
4. Operating Principles
The ICYYGO LED chip functions by converting electrical energy into light. Once properly installed and connected to a compatible DC power supply (within the 24-36V range and appropriate current for its wattage), the chip will illuminate. Ensure the power supply provides stable voltage and current to prevent damage and ensure optimal performance.
5. Maintenance & Precautions
- Environment: Avoid using the LED chip in excessively humid or high-vibration environments.
- Temperature: Do not operate the product in high-temperature environments for extended periods.
- Switching: Avoid frequent power cycling (frequent switching on and off) to extend the service life of the product.
- Disassembly: Unauthorized disassembly is strictly prohibited. The product must not be disassembled.
6. Troubleshooting
| Fault Phenomenon | Possible Causes | Solutions |
|---|---|---|
| Light does not light up/flashes | The power is not connected or the contact is poor. | Check the power supply and connecting cable for secure and correct connections. |
| Overheating | Poor heat dissipation. | Improve the ventilation conditions of the installation location. Ensure adequate airflow around the chip. |
| Uneven illumination | Improper angle of lamp beads. | Adjust the angle of the lamp beads or replace accessories if necessary to achieve desired light distribution. |
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | ICYYGO |
| Model Number | IC-10-150W 2835 |
| Item Type | BALL |
| Origin | Mainland China |
| Certification | CCC |
| Voltage | DC 24-36V |
| Power Options | 10W, 20W, 30W, 50W, 100W, 150W |
| 10W Current | 300mA |
| 20W Current | 600mA |
| 30W Current | 900mA |
| 50W Current | 1500mA |
| 100W Current | 1500mAx2set (requires two 50W drivers) |
| 150W Current | 1500mAx3set (requires three 50W drivers) |
| Suitable For | DIY LED Flood light |
| Occasion | Garden/Square/Highway |
| Aluminum Base Plate Thickness | 1 mm (0.06 inches) |
| Thermal Conductivity of Aluminum Substrate | 2.0W/(m.K) |
7.1. Dimensions by Wattage
-
Figure 4: 10W LED Chip Dimensions (49mm x 49mm overall, 24mm x 26mm luminous area). -
Figure 5: 20W LED Chip Dimensions (59mm x 49mm overall, 40mm x 32mm luminous area). -
Figure 6: 30W LED Chip Dimensions (79mm x 66mm overall, 58mm x 38mm luminous area). -
Figure 7: 50W LED Chip Dimensions (80mm x 60mm overall, 67mm x 35mm luminous area). -
Figure 8: 100W LED Chip Dimensions (120mm x 80mm overall, 93mm x 53mm luminous area). -
Figure 9: 150W LED Chip Dimensions (143mm x 90mm overall, 116mm x 63mm luminous area).
8. User Tips
- Cables: Note that connecting cables are typically not included with the LED chip and must be sourced separately. Ensure they are rated for the appropriate current and voltage.
- Compatibility: When integrating into existing fixtures like solar spotlights, always verify that the fixture's power driver is compatible with the LED chip's voltage (DC24-36V) and current requirements.
- Reliability: Users have reported good performance and reliable delivery of these LED chips.
9. Frequently Asked Questions (FAQ)
Q: Can this LED chip be installed in any solar spotlight?
A: The compatibility depends on the solar spotlight's power supply voltage and current requirements. Ensure the solar spotlight's driver matches the specifications of the LED chip (DC24-36V and appropriate current for the wattage). Always check the technical specifications of both the LED chip and your solar spotlight before attempting installation.
10. Warranty & Support
10.1. Warranty Period
The product comes with a one-year warranty period. Within this period, defects caused by non-human factors can be replaced or refunded.
10.2. Customer Support
For any inquiries or support needs, please contact the ICYYGO brand customer service. You may also refer to the official user manual (PDF) for more detailed information: View User Manual (PDF).