HSIMNENSII Key Switch

Contents

HSIMNENSII Tempered Glass Self-Resetting Wall Lamp Switch Panel

User Instruction Manual

1. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.
  • Always ensure power is disconnected at the main circuit breaker before installation or maintenance.

2. Product Overview

The HSIMNENSII Tempered Glass Self-Resetting Wall Lamp Switch Panel is designed for modern interiors, featuring a sleek tempered glass panel and a self-resetting piano-style button with an LED indicator. It is available in various gang (1, 2, 3, 4) and way (1, 2) configurations and colors (Black, Gray, Gold, White).

Overview of the self-resetting glass wall lamp switch, showing black, gray, gold, and white color options.

Figure 1: Product overview showing available colors (Black, Gray, Gold, White).

Video 1: Product demonstration highlighting tempered glass design, LED backlight, curved edge, mirror glass, piano key design, and installation display.

3. Features

  • Tempered Glass Panel: Provides a durable, scratch-resistant, and easy-to-clean surface.
  • Self-Resetting Mechanism: The switch button returns to its original position after each press, functioning as a momentary switch.
  • LED Indicator: A subtle blue LED light indicates the switch status or location in the dark.
  • Piano Button Design: Ergonomic and aesthetically pleasing button style.
  • Curved Edge Design: Enhances safety and provides a smooth, modern finish.
  • Mirror Glass Finish: Adds a touch of elegance to any room.
  • Multiple Configurations: Available in 1, 2, 3, or 4 gang options, and 1-way or 2-way control.
  • Color Options: Black, Gray, Gold, White.
Diagram illustrating the LED atmosphere lamp feature, showing the blue LED indicator on the switch buttons.

Figure 2: LED atmosphere lamp feature.

Image demonstrating the 3D arc design and curved edges of the switch panel.

Figure 3: 3D Arc design with curved edges.

4. Installation Guide

Professional installation by a qualified electrician is highly recommended. Ensure power is OFF at the main circuit breaker before beginning installation.

  1. Preparation: Disconnect power to the circuit at the main circuit breaker. Remove any existing switch plate and switch.
  2. Remove Protective Films: Before mounting, carefully remove all protective films from the tempered glass panel.
  3. Wiring: Connect the electrical wires to the terminals on the back of the switch module. Ensure correct polarity and secure connections. This is a momentary switch, typically used with a relay or smart home system.
  4. Mounting: Insert the switch module into a standard 86x86mm wall box. The mounting screw distance is 60mm. Secure the module using the provided screws.
  5. Attach Panel: Carefully align the tempered glass panel over the switch module and press firmly until it clicks into place.
  6. Test: Restore power at the main circuit breaker and test the switch functionality.
Technical diagram showing the dimensions (86x86mm, 29.5mm switch depth, 8.5mm panel thickness) and the standard 60mm screw distance for installation.

Figure 4: Dimensions and installation diagram.

5. Operation

This is a self-resetting, momentary push-button switch. It does not latch in an 'on' or 'off' position. Each press sends a momentary signal to the connected device (e.g., a relay or smart home controller).

  • Single Press: Briefly press the piano-style button to activate the connected circuit or send a signal. The button will return to its original position immediately after release.
  • LED Indicator: The blue LED light on the button will illuminate when pressed or may indicate the status of the connected load, depending on your wiring and connected system.

6. Maintenance

  • Cleaning: To clean the tempered glass panel, use a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
  • Storage: If removing the switch for an extended period, store it in a dry place, away from direct sunlight and extreme temperatures.
  • Inspection: Periodically inspect the switch for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

7. Troubleshooting

  • Switch Not Responding:
    • Check if the main circuit breaker is ON.
    • Ensure all wiring connections are secure and correct.
    • Verify that the connected relay or smart home system is functioning correctly.
  • LED Indicator Not Lighting Up:
    • Confirm power is supplied to the switch.
    • Check wiring for the LED indicator, if applicable.
    • The LED's behavior might depend on the connected system's configuration.
  • Physical Damage to Glass Panel: If the tempered glass panel is cracked or damaged, discontinue use immediately and replace the unit to prevent electrical hazards.

8. Specifications

Attribute Value
Brand NameHSIMNENSII
Model NumberKey Switch
Item TypeSWITCHES
Switch TypePush Button Switch (Self-Resetting/Momentary)
MaterialAcrylic (Panel: Tempered Glass)
Current16A
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
Size86*86mm (Panel dimensions)
Mounting Screw Distance60mm
FeaturesUniversal, LED indicator, Tempered Glass, Self-Resetting
Is Smart DeviceNo
OriginMainland China
CertificationRoHS, CE, CCC
High-concerned chemicalNone
Colors AvailableWhite, Gray, Black, Gold
Package Dimensions (approx.)10cm (L) x 10cm (W) x 5cm (H)
Package Weight (approx.)0.15 kg

9. User Tips

  • Momentary Action: Remember that these are self-resetting (momentary) push-buttons. They are designed to send a pulse signal, not to maintain a continuous ON/OFF state. You will need a compatible relay or smart home system to control your lights or devices.
  • Not for Direct Dimming: The product specifications do not indicate dimming capabilities. If you require dimming, ensure your connected relay or smart system supports it, and that the light fixtures are dimmable.
  • Aesthetic Integration: The sleek tempered glass design and multiple color options (Black, Gray, Gold, White) allow for seamless integration into various modern interior designs.

10. Warranty and Support

This product comes with a 5-year warranty from the date of purchase, covering manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

For detailed technical information, wiring diagrams, or further assistance, please refer to the official user manual PDF available at: View User Manual (PDF).

For any other inquiries or support, please contact your retailer or the manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.