1. Introduction
Thank you for purchasing the T&G TG157 Outdoor Portable Wireless Bluetooth Speaker. This speaker combines advanced audio technology with versatile features, including Bluetooth connectivity, FM radio, TF card/USB playback, AUX input, and dynamic LED lighting. Please read this manual carefully to ensure proper use and to fully enjoy all the features of your new speaker.
Image 1: T&G TG157 Speaker showcasing different colors and LED light effects.
2. Package Contents
- 1 x T&G TG157 Bluetooth Speaker
- 1 x Micro USB Charging Cable
- 1 x AUX Audio Cable
- 1 x User Manual
3. Product Overview & Controls
Familiarize yourself with the speaker's ports and buttons:
Image 2: Speaker control panel and port diagram.
Ports (Side Panel):
- Charge Socket (Micro USB): For charging the speaker.
- TF Card Port: Insert a TF (Micro SD) card for music playback.
- USB Port: Insert a USB flash drive for music playback.
- AUX Port: Connect external audio devices using the 3.5mm AUX cable.
Control Buttons (Top Panel):
- Power ON/OFF Button: Long press to power on/off.
- Play/Pause / Call Button: In music mode, short press to play/pause. In Bluetooth mode, short press to answer/end calls, double click to redial.
- 'M' (Mode) Button: Short press to switch between Bluetooth, FM Radio, TF Card, USB, and AUX modes.
- '-' (Volume Reduction / Previous Song) Button: Short press for previous song, long press to decrease volume.
- '+' (Volume Plus / Next Song) Button: Short press for next song, long press to increase volume.
- Light Mode Switch Button: Short press to cycle through LED light modes, long press to turn off LED lights.
4. Setup
4.1 Charging the Speaker
- Connect the Micro USB end of the charging cable to the speaker's Charge Socket.
- Connect the USB-A end of the charging cable to a USB power adapter (5V/500mA, not included) or a computer's USB port.
- The LED indicator will show charging status (usually red while charging, off when fully charged).
- A full charge takes approximately 2-3 hours.
4.2 Powering On/Off
- To Power On: Long press the Power ON/OFF button until you hear an audible prompt.
- To Power Off: Long press the Power ON/OFF button again until you hear an audible prompt.
5. Operating Instructions
5.1 Bluetooth Mode
- Power on the speaker. It will automatically enter Bluetooth pairing mode (indicated by a flashing LED and an audible prompt).
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select