Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your EZAIOT RF433 Wireless Thermostat. This device is designed to control heating systems, specifically gas boilers and water floor heating, offering programmable temperature control and smart home integration with Tuya WiFi, Amazon Alexa, and Google Assistant.
For additional resources, including product manuals and videos, please refer to the official PDF user manual available at: User manual (PDF).
Safety Instructions
- This device is intended for controlling heating systems only.
- Keep the device away from high heat and humidity.
- Use compatible Type-C adapters and regularly check cables for damage.
- If batteries overheat or leak, immediately stop using the device and contact a professional.
- Do not attempt to disassemble or repair the device yourself.
- Ensure power is disconnected before any wiring or installation.
- Verify voltage specifications match your system.
- Follow all local electrical codes. If unsure, consult a qualified electrician.
Our products comply with the following regulations: CE Conformity (RED, LVD, EMC) and RoHS Conformity.
Product Overview
Standard Accessories
- 1 x RF Remote Controller
- 1 x RF Receiver
- 1 x Manual
- 1 x Screw Pack
Key Features
- Wireless RF Communication: The remote controller communicates with the receiver via RF433MHz, with a range of up to 200m in open air.
- Smart Home Integration: Compatible with Tuya APP, Smart Life APP, Amazon Alexa, and Google Assistant for convenient remote and voice control.
- Programmable Modes: Supports Manual Mode, Auto Mode, and Temporary Mode with weekly programming for customized heating schedules.
- Temperature Adjustment: Offers precise temperature control with a setting accuracy of 0.5°C.
- Safety Features: Includes Child Lock, Antifreeze Function, and Safety Lock Function.
- Data Analysis: Statistics function to analyze temperature data for efficiency and energy saving.

Overview of the RF Thermostat system, showing connectivity with Tuya/Smart Life apps and voice assistants, and the wireless range to the boiler.

Diagram illustrating additional functions: Linkage Control Delay, Antifreeze Function, Safety Lock Function, and Statistics Function.
Setup
1. Power Supply for RF Remote Controller
- Press the battery compartment lock and slide the cover downwards to remove it.
- Insert 2 new LR6 AA alkaline batteries into the compartment, ensuring correct polarity.
- Reattach the battery compartment cover and latch it into place.

Illustration of battery installation for the RF Thermostat and AC power supply for the RF Receiver.
2. Installation of the RF Receiver Device
- Confirm the type of screws at the bottom of the receiver. Unscrew them, then use a screwdriver to carefully pry open the gap in the bottom guiding structure to remove the front cover.
- Connect the wires to the terminals according to the wiring diagram provided below.
Wiring Options:
- Surface Wiring Installation: Remove the crimping plate, locate mounting screws, remove the plate carefully, and store screws safely. Ensure adequate wire length, clean wire ends, insert into marked terminals, and verify a secure connection. Position the crimping plate, secure with original screws, and verify proper tension.
- Concealed Wiring Installation: Ensure adequate wire length, clean wire ends, insert into marked terminals, and verify a secure connection.
3. Wiring Diagram for the RF Receiver
Important Safety Notice: Ensure power is disconnected before wiring. Verify voltage specifications and consult a qualified electrician if unsure.

Detailed wiring diagram for connecting the RF Receiver to water heating or electric heating systems, including supply, output, and external sensor connections.
4. Pairing Steps of Thermostat Set
Tip: The thermostat set is typically pre-paired at the factory. You can usually use it directly.
- Receiver: During power-on, press the "SET" key for 3 seconds. The pairing light will flash, indicating the receiver is in pairing mode.
- Remote Controller: During power-off, press "Up" + "Mode" for 3 seconds. The remote controller will enter pairing mode.
- When the receiver's buzzer beeps once and the pairing light is continuously on, pairing is successful.
Attention: Ensure the remote controller and receiver are paired before attempting Wi-Fi configuration.
5. Device Connection (Smart Life App)
Install the Smart Life App
Scan the QR code below or search for "Smart Life" in your device's app store (App Store for iOS, Google Play for Android) to install the app and sign in to your account.

QR code to download the Smart Life App.
Enter Network Configuration Mode
Attention: The RF Thermostat must be paired with the RF receiver before entering network configuration mode.
RF Thermostat: Briefly press the "Power" button to switch to OFF mode. Then, simultaneously press and hold the "Mode" and "Down" buttons for more than 3 seconds until the loading animation appears and the Wi-Fi icon starts flashing. This indicates the device is in network configuration mode.
Add Device via App
Attention: Turn on your phone's Bluetooth and Wi-Fi. Ensure your smartphone's operating system allows the Smart Life app to access Bluetooth.
- Open the app's "Home" interface, click on "+" in the upper right corner, and select "Add Device".
- The system will automatically search for and find the device. Click "Add".
- Select 2.4G Wi-Fi and enter the password. Click "Next".
- Wait for the device to be successfully added, then click "Done" to complete the installation.
Operating Instructions
1. User Operation of RF Remote Controller
- Power On/Off: Press the "Power" button briefly to turn the thermostat on or off.
- Time Setting: Press and hold "Mode" + "Up" for 3 seconds. Use "Mode" to select the item (weekday, clock) and "Up" or "Down" to adjust. Confirm with a short press of "Power".
- Temperature Setting: Press "Up" or "Down" to increase or decrease the setpoint temperature by 0.5°C.
- Child-Lock: Press and hold "Mode" + "Up" for 3 seconds to activate/deactivate child-lock.
- Temperature Control Mode: Press "Mode" briefly to switch between Manual Mode and Auto Mode.
- Manual Mode: Temperature is controlled by the current setting via "Up" or "Down" until manually changed again.
- Auto Mode: Temperature follows the set heating profile. Manual changes are temporary until the next profile change.
- Weekly Programming Setting: For weekdays and weekends, up to 6 heating events with individual temperature settings can be saved. Press and hold "Mode" for 3 seconds to enter programming. Use "Mode" to select items and "Up" or "Down" to adjust. Confirm with "Power".

Example of a weekly programming schedule for weekdays and weekends.
2. RF Receiver Operation Instructions
| Status | Steps | Display State |
|---|---|---|
| Power on/off | Press "Power Button" shortly | "Power light is always on/off" |
| Wi-Fi config | During power-off, press "Power Button" for 3 seconds | "Network indicator light flashes" |
| Wi-Fi config completion | "Network indicator illuminates with buzzer alert" | |
| No operation in 3 min, it will exit the Wi-Fi config | "Network indicator light is off" | |
| RF Pairing | During power-on, press "SET Button" for 3 seconds | "Pairing light flashes" |
| No operation in 30 s, it will exit the RF Pairing state | Buzzer beeps + "Pairing light is on" | |
| When "Fault indicator light" is on, press "SET Button" shortly to exit the RF Pairing state | "Pairing light is off" | |
| RF Pairing success completion | "Pairing light is off" | |
| Forced output | During power-on, when "Fault indicator light" is on, press "Power key" for 3 seconds | "Power light: on; Heating light: on" |
| Press "Power Button" briefly to exit | "Power light: off; Heating light: off" |
3. Smart Voice Control
The thermostat supports voice commands via Amazon Alexa and Google Home. Ensure your device and smart speaker have consistent temperature units.

Examples of voice commands for controlling the thermostat with Amazon Alexa and Google Assistant.
Amazon Alexa Commands:
- "Alexa, turn on SCENENAME"
- "Alexa, set the DEVICENAME to on/off/auto"
- "Alexa, what is the temperature of DEVICENAME?"
- "Alexa, set DEVICENAME to 26 celsius"
- "Alexa, decrease/increase DEVICENAME temperature"
Google Home Commands:
- "OK Google, turn on SCENENAME"
- "OK Google, what mode is the DEVICENAME set to?"
- "OK Google, what temperature is the DEVICENAME set to?"
- "OK Google, set the DEVICENAME to 26 celsius"
- "OK Google, decrease/increase DEVICENAME temperature"
Note: "SCENENAME" and "DEVICENAME" are customizable. Ensure temperature units are consistent.
Maintenance
Battery Replacement
The RF Remote Controller is powered by 2 x 1.5V AA alkaline batteries. When the battery power is less than 20%, the battery power icon on the display will flicker. It is recommended to replace the batteries as soon as possible with new, high-quality LR6 alkaline batteries to ensure optimal performance.
General Care
- Keep the thermostat and receiver clean by wiping with a soft, dry cloth.
- Avoid exposing the devices to extreme temperatures, direct sunlight, or high humidity.
- Regularly check all wiring connections for security and integrity.
Troubleshooting
Attention: If the remote controller is offline or the sensors do not work as usual, the fault indicator light "A" on the RF Receiver will be on.
| Status | Problem | Solution |
|---|---|---|
| Indicator "A" lights up with buzzer alert | Remote control offline | Check the battery, re-pair the device, and restart. If the issue persists, contact support. |
| Indicator "A" lights up | Sensor malfunction | Contact the customer service staff. |
Advanced Settings (For Professional Technicians Only)
This section is intended for professional technicians only. Incorrect settings may affect system performance. Read all instructions carefully before making changes.
During power-off, press and hold "Mode" for 3 seconds to enter advanced setting mode. Repress "Mode" to switch to the next setting item. Confirm by pressing "Power" briefly.
| Code | Meaning | Setting Range ("Up" or "Down") | Default Value |
|---|---|---|---|
| 1ADJ | Temperature Calibration | -9.9°C ~ 9.9°C (14°F ~ 50°F) | 0°C |
| 2SEN | Sensor selection | IN: Temp. control based on built-in sensor OUT: Temp. control based on external sensor ALL: Temp. control based on built-in sensor and limited by external sensor | IN |
| 3LIT | Temperature Upper Limit Protection | OFF, 35~80°C | OFF |
| 4DIF | Switch deviation | 0.5~10°C | 0.5°C |
| 5LTP | Frost protection | ON: frost protection on OFF: frost protection off | OFF |
| 6PRG | Weekly programming setting | 12345: 5+2 week mode 123456: 6+1 week mode 1234567: 7+0 week mode | 12345 |
| 7HIT | Temperature upper limit | 5~95°C | 50°C |
| 8DLY | Delay time of passive linkage control | 0~5min | 0 |
| 9FAC | Restore factory settings | Press and hold "Up" for 3 seconds | / |
Specifications
Dimensions (Unit: mm)
- RF Remote Controller: 45 (W) x 180 (L) x 18.4 (D)
- RF Receiver: 86 (W) x 86 (L) x 26 (D)
Technical Specifications
| Feature | RF Remote Controller | RF Receiver |
|---|---|---|
| Power supply | 2 x 1.5 V alkaline AA batteries | AC100~240V; 50/60Hz |
| Power consumption | N/A | 1W max |
| Temp. setting range | 5~95°C | N/A |
| Ambient temperature | -5~50°C | -5~50°C |
| Temp. Measurement accuracy | 0.1°C | N/A |
| Temp. setting accuracy | 0.5°C | N/A |
| Transmission distance | ≤200m in the open air | ≤200m in the open air |
| Wi-Fi | N/A | 802.11b/g/n (2.4GHz) |
| Wireless frequency | 433.92 MHz (FSK) | 433.92 MHz (FSK) |
| Protection level | IP 20 | IP 20 |
| Housing material | N/A | Anti-Flammable PC |
Altitude Operating Specifications:
- 0-2500 m: Thermostat operates at 100% rated capacity.
- 2500-4200 m: External load limited to 80% rated capacity.
User Tips
- Always use new, high-quality LR6 alkaline batteries for the remote controller to ensure reliable performance and accurate temperature control.
- Regularly check the battery level, especially before seasonal changes, to avoid unexpected power loss.
- For optimal wireless communication, ensure the RF Remote Controller and RF Receiver are within the specified 200m open-air range and minimize obstructions.
- Utilize the weekly programming feature to set energy-efficient heating schedules that match your daily routine.
Warranty and Support
For any issues not covered in this manual, or if troubleshooting steps do not resolve your problem, please contact customer service for assistance. Refer to the official PDF user manual for comprehensive details regarding product warranty and support information.
