1. Introduction
This manual provides essential information for the safe and efficient use of your Feyree EV Charger Adapter. This adapter is designed to convert a Type 2 (IEC 62196-2) charging connector to a GB/T standard connector, enabling compatibility between European/international Type 2 charging stations and electric vehicles that utilize the Chinese GB/T charging standard. Please read this manual thoroughly before using the product.
Figure 1: Feyree EV Charger Adapter connecting Type 2 to GB/T standards.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product and your vehicle:
- Do not use the adapter if it appears damaged, cracked, or has exposed wiring.
- Ensure all connections are secure and fully inserted before initiating charging.
- Do not attempt to modify or disassemble the adapter.
- Keep the adapter away from water, excessive heat, and direct sunlight when not in use.
- This adapter is rated IP55, meaning it is protected from limited dust ingress and low-pressure water jets from any direction. However, it is not fully waterproof and should not be submerged.
- Operating temperature range is -35°C to +55°C. Do not use outside this range.
3. Product Overview
The Feyree EV Charger Adapter facilitates charging of GB/T standard electric vehicles using Type 2 charging infrastructure. It is available in different power configurations:
- 1-Phase Version: Supports 16A/32A, up to 7KW charging.
- 3-Phase Version: Supports 16A/32A, up to 22KW charging.
Figure 2: 1-Phase (1P) Feyree Type 2 to GB/T Adapter.
Figure 3: 3-Phase (3P) Feyree Type 2 to GB/T Adapter.
The adapter features a robust thermoplastic shell and connector pins made of copper alloy with silver plating for optimal conductivity and durability.
Figure 4: Side view of the Feyree adapter.
Figure 5: GB/T connector end of the adapter.
Figure 6: Type 2 connector end of the adapter.
4. Specifications
Figure 7: Detailed product specifications.
| Feature | Specification |
|---|---|
| Rated Current | 16A / 32A (Single/Three Phase) |
| Rated Voltage | 0V ~ 450V |
| Standard | GB/T 20234, IEC 62196 |
| Flammability Rating | UL94 V-0 |
| Insulation Resistance | 0.5mΩ Max |
| Mating and Un-mating Force | 45 < F < 80N |
| Mechanical Life (Normal use) | > 10000 Times |
| Working Temperature | -35°C ~ +55°C |
| IP Rating | IP55 |
| Shell Material | Thermoplastic Material |
| Connector Pin Material | Copper Alloy, Silver Plating |
| Height | 19 cm |
| Width | 8 cm |
| Length | 8 cm |
| Weight | 0.5 kg |
5. Setup
Follow these steps to correctly set up and connect your Feyree EV Charger Adapter:
- Inspect the Adapter: Before each use, visually inspect the adapter for any signs of damage, wear, or foreign objects in the connectors.
- Connect to Charging Station: Take the Type 2 end of the adapter and firmly insert it into the Type 2 charging cable from the charging station. Ensure it clicks into place or is otherwise securely locked.
- Connect to Electric Vehicle: Take the GB/T end of the adapter and firmly insert it into the GB/T charging port on your electric vehicle. Ensure it is fully seated and locked.
- Verify Connection: Double-check that both ends of the adapter are securely connected to the charging cable and the vehicle's charging port. A loose connection can lead to inefficient charging or safety hazards.
Figure 8: Connection diagram for the EV charger adapter.
Figure 9: Adapter securely connected to an electric vehicle's charging port.
6. Operating Instructions
Once the adapter is securely connected, follow these steps to begin and end the charging process:
- Initiate Charging: Activate the charging session from the charging station's interface or your vehicle's infotainment system, as per the specific instructions for your charging station and vehicle.
- Monitor Charging: Observe the charging status indicators on the charging station, your vehicle, or any associated mobile applications. Ensure charging is proceeding as expected.
- End Charging: Once your vehicle is sufficiently charged or you wish to stop the session, terminate charging via the charging station's interface or your vehicle's controls.
- Disconnect Adapter: After the charging session has ended and the charging station has released the cable, carefully disconnect the GB/T end from your vehicle, followed by the Type 2 end from the charging cable.
Figure 10: Example of a charging station display during operation.
7. Maintenance
Proper maintenance ensures the longevity and safe operation of your adapter:
- Cleaning: Use a dry, clean cloth to wipe the exterior of the adapter. Do not use abrasive cleaners or solvents. Ensure connectors are free of dust and debris.
- Storage: Store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Use the protective caps (if provided) to cover the connectors when not in use.
- Inspection: Regularly inspect the adapter for any signs of physical damage, such as cracks, bends, or corrosion on the pins. If any damage is found, discontinue use immediately.
8. Troubleshooting
If you encounter issues while using the adapter, consider the following:
- No Charging:
- Ensure both ends of the adapter are fully and securely connected.
- Check the charging station for error messages or status indicators.
- Verify that the charging station is active and supplying power.
- Confirm your vehicle's charging port is functioning correctly.
- Slow Charging:
- Ensure the adapter's power rating (7KW or 22KW) matches or exceeds the charging station's output and your vehicle's input capabilities.
- Check if the charging station is operating at its full capacity.
- Environmental factors (e.g., extreme cold) can sometimes affect charging speed.
- Adapter Overheating:
- Immediately disconnect the adapter if it feels excessively hot.
- Ensure the adapter's current rating (16A/32A) is not exceeded by the charging station.
- Inspect for any internal damage or loose connections. Discontinue use if overheating persists.
9. User Tips
Based on user experiences, here are some tips for optimal use:
- Secure Connection: Users report that the adapter fits tightly and securely, which is crucial for reliable charging. Always ensure a firm connection to prevent interruptions.
- Performance: The adapter has been tested to deliver expected power outputs (e.g., 6.6KW in a Kia Soul EV, 7KW overnight charging) without significant heating, indicating good build quality.
- Compatibility Check: While designed for Type 2 to GB/T conversion, always confirm the specific voltage and current requirements of your vehicle and the charging station to ensure full compatibility with your adapter's specifications.
10. Warranty and Support
The Feyree EV Charger Adapter is manufactured to high-quality standards. For any technical support, warranty claims, or further inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.