1. Safety Precautions
This section presents important information intended to ensure safe and effective use of this printer.
WARNING:
- Scratch Warning: Never try to touch the auto cutter or jagged teeth.
- Scald Warning: To avoid being burned, please do not touch the printer head.
- Shock Warning: Please cut off the power before you Plug/Unplug the power cable from the printer.
Cautions:
- Please apply the power adapter to a stable voltage (110-220V); please do not use other devices on the same power outlet to avoid voltage fluctuation.
- Install the printer on a flat and stable surface to avoid printer suffering from any vibration and shocks.
- If water or other liquid spills into the printer, unplug the power cord immediately and contact your dealer or service center for advice.
- Disconnect the power cord if the printer is idle for a long time.
- Please ensure the switch button is "off" before you plug the power cord.
- The printer should only be disassembled or repaired by a technician.
- Please strictly follow the recommended use tips of this manual.
2. Product Overview
The HZTZ 80mm Thermal Receipt Printer HZ-8360 is designed for commercial use in reception, kitchen, and dining room environments. It features automatic cutting, a wide print width, and multiple interface options for versatile connectivity.
3. Specifications
Key Features:
- High-quality printing, high-speed, and strong stability.
- Multiple interfaces: Serial (RS232), USB, Ethernet (RJ45), Bluetooth, WiFi.
- Supports Android devices via USB, Bluetooth, or WiFi.
- Supports iOS devices via Ethernet, Bluetooth, or WiFi.
Technical Parameters:
| Parameter | Specification |
|---|---|
| Printer Method | Line Thermal |
| Print Speed | 300mm/sec (80-III type); 250mm/sec (80-II type) |
| Fonts | Simplified Chinese 24x24 point, support 18030 font library, Taiwan and HK traditional (complex font), Korean and Japanese |
| Character Size | 576dot/line or 512dot/line ANK Character; Font A: 12x24dot, 1.5(W)x3.0(H)mm; Font B: 9x17dot, 1.1(W)x2.1(H)mm; Simplified/Traditional: 24x24dot, 3.0(W)x3.0(H)mm |
| Extended Character Table | OEM437/Katakana/OEM850/OEM860/OEM863/OEM865 WestEurope/Greek/Hebrew/East Europe/Iran/WPC1252/OEM866/OEM852/OEM858/IranlI/Latvian/Arabic/PT151,1251/OEM747/WPC1257/Vietnam/OEM864/Hebrew/WPC1255/Thai |
| Logo/Trademark | Download and printing support |
| Interface | Serial / USB / Ethernet / Bluetooth / WIFI (option) |
| Print Command | ESC/POS Command |
| Roll Width | 79.5±0.5mm (Print Width 72mm) |
| Roll Diameter | 80mm |
| Paper Thickness | 0.06-0.08mm |
| Power Supply | DC24V/2.5A |
| Auto Cutter | Full/Partial Cut |
| Codes type | UPC-A/UPC-E/JAN13(EAN13)/JAN8(EAN8)/CODE39/ITF/CODABAR/CODE93/CODE128/ |
| 2D Barcode | QR CODE |
| Temperature | 0-45℃ |
| Contrast Humidity | 10-80% |
| Driver | Win2000/Win2003/Win XP/Win Vista/Win7/Win8/Win10/Linux |
| Weight | 1.5kg |
| Certification | CE, FCC, RoHS |
4. Setup
4.1 Hardware Connection
Ensure all cables are connected correctly (e.g., Power Adapter, Interface Cables, RJ-11 cable). Open the cover and load the paper rolls and cartridge. The paper should be loaded in the direction shown in the manual.
4.2 Driver Installation (Windows)
- Insert the driver CD, click the related files (printer driver software of 58mm/80mm series) and install.
- Select the installation language (e.g., English) and click "Confirm".
- Follow the setup wizard, clicking "Next" as prompted.
- Read and accept the related terms to proceed with the installation.
- Click "Next Step" to choose the driver installation channel (default or modify).
- Click "Next Step" again to install the driver.
- Click "Start Installation" and select the installation type.
- Finish the driver installation.
4.3 USB Port Connection
- Connect the printer to the PC with a standard USB cable. The printer should be automatically recognized.
- Open "Printer Properties" and navigate to the "Ports" tab.
- Select the unoccupied USB port (e.g., USB001) and click "Apply".
- Ensure the printer is powered on and connected to the computer. If "USB001" is not found, recheck the cable and printer connection.
- Click "General" and then "Print Test Page" to verify the installation.
4.4 Ethernet IP Address Setting
If printing via Ethernet, the printer's Mac, IP, subnet mask, and gateway may need to be modified. Follow these steps:
- Connect the printer to the computer using a crossover cable, or connect both to a router.
- Press the "FEED" button while turning on the printer power switch. Release the "FEED" button when the "PAPER OUT" indicator lights up. The printer will print a self-test page containing its IP information (Default IP Address: 192.168.1.100).
- Modify the IP address of your computer to be in the same network segment as the printer.
- Open a PC browser and enter the printer's IP address (e.g., 192.168.1.100) to access the Ethernet WebSet System.
- Click "Configuration" to set Ethernet-related information. Modify as needed and click "Save".
- Restart the printer. Enter the new IP address in your browser to check the settings.
- Perform a "Print Test" from the Ethernet WebSet System.
- For 80- and 80-IV IV-E models, use the "tool" software on the CD to set up the printer.
- For WiFi IP Address Setting, connect the printer to PC, find the wireless network (HF-LPB100), and enter the IP address (10.10.100.254) in a browser. Configure the work mode (e.g., AP+STA mode) and STA settings.
4.5 Bluetooth Port Connection
- Ensure your device (e.g., laptop) has Bluetooth enabled and activated. The Bluetooth icon should be visible on your display.
- Power on the Bluetooth printer.
- Add the Bluetooth printer: Left-click the Bluetooth icon, select "Add a Bluetooth Device". Choose "My device is set up according and ready to be found" and click "Next".
- The device will search for the Bluetooth printer.
- Once found, select the "Bluetooth printer" and click "Next".
- Choose "Let me choose my own passkey" and enter "1234" (default passkey). Click "Next".
- Once connected, note the assigned COM ports and click "Finish".
- To test, use a COM tool to send printed data to the Outgoing COM port (e.g., COM5) with settings 9600, N, 8, 1.
4.6 Operating Manual for Android OS
This manual applies to all 58mm & 80mm width printers compatible with Android OS. Common communication ports are USB, Ethernet, Bluetooth, and WiFi.
- Insert the driver CD into your computer and connect your Android device.
- Find the file named "SDK" from the CD driver, then navigate to "BLUETOOTHDEMO -> bin -> BT-POSPrinter.APK" and install it on your Android device.
- Connect your Android device with the printer after installation.
- Find the printer icon on your Android device, click "Connect Printer" to search for the Bluetooth printer (default pairing password is 1234).
- After successful connection, click "Print Test Page".
- For Ethernet, USB, or WiFi communication, replace "BLUETOOTHDEMO" with "NETDEMO", "USBDEMO", or "WIFIDEMO" respectively.
4.7 Operating Manual for iOS APP
- Download the Test Tools "POS-PrinterV1.0" from the App Store.
- Turn on the Bluetooth setting of your iOS device, then click "POS-Printer" in the Bluetooth device list.
- Into the App of "POS-Printer", select the paper width.
- Select the communication method ("Bluetooth" or "WIFI").
- If connecting with Bluetooth, click "Select Printer" to search for "Bluetooth Printer" (default name) and connect.
- If connecting with WIFI, ensure your device and printer are on the same network segment. Click "Connect" and enter the printer IP.
- If successful, you can print text to test.
5. Operating the Printer
5.1 Basic Function Operation
Indicator Light & Printer Status:
The printer has 3 LED indicators: Power, Error, and Paper Out. The Power indicator lights up when plugged in. The Error LED lights up for errors (Paper Out, high temperature, print head carriage mal-position). Press the "FEED" button to test paper feeding.
Printer Operation:
- Switch on: Ensure the adapter is properly connected, then press the switch to the "1" position.
- Switch off: Press the switch to the "O" position.
- Paper Feeding: Press the "FEED" button when powered on. Paper will run continuously until the button is released.
- Self Printing Test: Switch off the printer, then press and hold the "FEED" button. Press the "POWER" button simultaneously until the "PAPER OUT" indicator turns on. Release both buttons to print the current settings.
- Hexadecimal Printing: Power off the printer, press and hold the "FEED" button. Press the "POWER" button simultaneously until the "PAPER OUT" indicator turns on. Release the "FEED" button approximately 3 seconds after the "PAPER OUT" indicator turns off. The printer will enter Hexadecimal printing mode. Restart the printer to exit this mode.
5.2 Other Features of the iOS APP
- Send HEX: Enter hexadecimal data in the text box, click "Send HEX" to send it to the printer.
- Print Image mode: Input data in the text box, click "Print Image mode" to convert and print the text as an image.
- Open Casher: If your printer is connected to a cash drawer, click "open casher" to open the drawer. (This feature does not work for portable printers without a drawer interface).
- Cut paper: Click to feed out and cut the paper. (This feature does not work for portable printers or 58 series printers without a cutter).
- Self Test: Click "self-test" to print a self-test page. (Bluetooth printer name or MAC address will not be displayed if connected via Bluetooth).
6. Maintenance
6.1 Cleaning the Printer
Clean the print head if you experience unclear printing, unclear columns, or noisy paper feeding.
Cleaning Steps:
- Turn off the power, open the printer cover, and remove the paper roll.
- Wait for a while if the printer has just finished printing.
- Use a soft brush or cotton swab immersed in ethanol to clean the print head. Ensure the gear is lubricated.
- Close the cover after cleaning.
Cautions:
- Ensure the printer is turned off during maintenance.
- Keep hands or other metal tools away from the print head surface. Do not use tweezers to scratch the print head or other sensitive parts.
- Do not use gasoline, acetone, or other organic solvents for print head cleaning.
7. Troubleshooting
- Why serial port printer printing messy code?
A: Ensure the baud rate setting in the PC is the same as the printer baud rate (check self-test page). - Self printing test is OK, but printer does not work after driver installation.
A: Recheck installation according to the wizard, ensure the correct port is selected, or contact service center. - Cash drawer does not open?
A: Enable the cash drawer function from device settings and check cable connection, or contact service center. - Malfunction of paper feeding?
A: Use a soft brush to clean the paper sensor and try again, or send to service center. - Messy code printing after a period of time.
A: Interface board damaged, replace or repair it. - Malfunction of the indicator light.
A: Check cable connection/adapter/power cord/switch, or contact service center. - Ethernet printer does not print after linked with a router.
A: Ensure network cable and router port work, printer and router IP are on the same network segment, and printer IP is not occupied. Modify IP with IP setter software or contact service center. - Messy code printing except Arabic numeral printing.
A: Language switching incorrectly, adjust SW-4 switch on DIP switches. - Fuzzy printing of Chinese character.
A: Turn on SW-3 switch (DIP switches on the bottom of the printer). - Malfunction of the auto paper cutting.
A: Check if SW-1 is off and cutting function is Enabled, or contact service center. - Red indicator keeps flashing during printing.
A: Usually due to high temperature of the print head. If printing stopped, contact service center. - How to install a network shared printer driver?
A: Find the driver file of the shared printer from network neighborhood and click it. - Communication interrupts and cannot print if multiple Ethernet printers work simultaneously.
A: Check network, get printer Ethernet ID, resolve conflicts by assigning a specified Ethernet ID to each printer. - Printing speed is very slow for serial printer.
A: Follow path: Driver -> Properties -> Device Settings -> Print Mode -> Print as soft font. - Water or other liquid spills into the printer.
A: Cut off power, dry main board or print head with a hair dryer (careful of temperature, average 50 degrees C is OK). - Print page without any content (White).
A: 1. If self printing test is white, font is damaged, replace font chips. 2. If both printing methods are white, replace printer head. - How can we reset to default setting?
A: Find card slot on bottom of printer. Press black key (press and release) to reset IP to default. - How to reset the WiFi default setting?
A: Find card slot on bottom of printer. Press black key & Hold on (about 10 seconds) to reset WiFi to default.
8. User Tips
- Driver Installation: While driver installation can sometimes be tricky, ensure you follow the steps carefully. If issues arise, double-check the selected port and try different options.
- Bluetooth Connectivity: If you experience Bluetooth connection issues, try connecting via a cable (USB or LAN) as an alternative.
- Compatibility: The printer has been noted to be compatible with various POS systems, including some unsupported ones, with proper driver setup.
- Paper Roll Size: The printer supports 80mm thermal paper rolls.
- Loyverse Compatibility: The manual does not explicitly state compatibility with Loyverse. Please refer to Loyverse's documentation or support for printer compatibility.
- iPhone (iOS) Compatibility: The printer supports iOS devices via Ethernet, Bluetooth, or WiFi, requiring the "POS-PrinterV1.0" app.
9. Warranty and Support
This product comes with the manufacturer's "Shop's Three Guarantees" for after-sale service. For any issues, repairs, or further information, please contact your dealer or service center.
The seller of this item is HZTZ Printer Store. For detailed information, you may refer to the official user manual PDF available at: User manual (PDF).