1. Product Overview
The Aigo AR12 is a 120mm PC case fan designed to provide efficient cooling and impressive ARGB lighting effects for your computer system. It features a fluid bearing for quiet operation and a durable design for long-lasting performance. The fan can be controlled via a dedicated control box and remote, or synchronized with compatible motherboards using a 5V-3pin ARGB header.
Figure 1: Aigo AR12 PC Case Fans with Controller and Remote
Video 1: Aigo AR12 Fan RGB Lighting Demonstration
2. Package Contents
Depending on the product variant purchased (e.g., single fan, 3-in-1 kit, 5-in-1 kit), the package may include:
- Aigo AR12 120mm Fans
- Control Box (for multi-fan kits)
- Remote Control (for multi-fan kits)
- Mounting Screws
- Instruction Manual (PDF available online: View PDF)
3. Installation Guide
3.1 Control Box Wiring
The Aigo AR12 fans utilize a custom 6-pin connector for connection to the Aigo control box. The control box itself requires a SATA power connection from your power supply.
- Power Connection: Connect the SATA power cable from your power supply to the SATA port on the control box.
- Fan Connection: Connect the 6-pin fan cables from each AR12 fan to the FAN1-FAN10 ports on the control box. It is recommended to connect them in sequence from 1 to 10.
- LED Strip Connection (Optional): If using LED strips, connect them to the LED1-2 ports on the control box.
- Reset Button Connection (Optional): To control the lighting via your computer case's reset button, connect the reset cable from the case to the 'RESET' port on the control box.
- Motherboard ARGB Sync (Optional): For motherboard synchronization, connect the 5V-3pin ARGB cable from the control box to a compatible 5V-3pin ARGB header on your motherboard. Ensure your motherboard supports 5V ARGB (Addressable RGB) and not 12V RGB.
Figure 2: Control Box Wiring Diagram
3.2 Motherboard ARGB Sync
If you wish to control the fan lighting through your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion), connect the 5V-3pin ARGB cable from the control box to the appropriate 5V-3pin ARGB header on your motherboard. Do NOT connect to a 12V RGB header as this can damage the LEDs.
Figure 3: 5V ARGB Motherboard Sync Connection
4. Operating Instructions
4.1 Remote Control Usage
The included remote control allows for independent control of fan lighting and speed, separate from motherboard synchronization.
Figure 4: Remote Control Layout
- ON/OFF: The 'On' key switches lights on/off. The 'Off' key is solely for switching lights off; fan operation remains independent.
- RC/MB Switch: Use this button to switch between remote control mode and motherboard synchronization mode.
- M+/M- (Mode Adjustment): Cycles through various lighting patterns and effects.
- S+/S- (Speed Adjustment): Adjusts the speed of dynamic lighting effects.
- Brightness Adjustment: Keys with sun icons adjust the luminosity of the lights.
- AUTO: Executes all lighting patterns sequentially, with each pattern running for 5 seconds.
- Seven Color Monochromatic Shortcut Keys: Direct selection buttons for seven different solid colors.
4.2 Motherboard Software Control
If connected to a compatible 5V-3pin ARGB motherboard header, you can use your motherboard's proprietary software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to customize lighting effects and synchronize them with other ARGB components in your system. Ensure the control box is set to motherboard sync mode via the remote or a physical switch if available.
5. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your Aigo AR12 fans.
- Cleaning: Periodically clean the fan blades and frame to remove dust buildup. Use a soft brush or compressed air. Ensure the system is powered off before cleaning.
- Cable Management: Ensure all cables are neatly routed and secured to prevent interference with fan blades or other components.
- Connection Check: Occasionally check that all power and signal cables are securely connected to the fans, control box, and motherboard.
6. Troubleshooting
- Fans not spinning:
- Check if the SATA power cable is securely connected to the control box and the power supply.
- Ensure the 6-pin fan cables are correctly inserted into the control box ports.
- Verify that the power supply is functioning correctly.
- RGB lights not working/incorrect colors:
- If using the remote, ensure the control box is in remote control mode (not motherboard sync mode).
- If using motherboard sync, ensure the 5V-3pin ARGB cable is correctly connected to a 5V-3pin ARGB header (not 12V RGB).
- Check your motherboard's ARGB software settings.
- Ensure the remote control has working batteries.
- Fans are noisy:
- Check for any obstructions (cables, dust) hitting the fan blades.
- Ensure fans are securely mounted and not vibrating against the case.
- Clean any dust buildup on the fan blades.
- Compatibility: Note that these fans use a custom 6-pin connector and are designed to work with the Aigo fan hub/control box. They are not directly compatible with standard 3-pin or 4-pin fan headers without the control box.
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | AR12 |
| Fan Size | 120 MM |
| Voltage | 12V |
| Fan Speed | 1200 - 1350 RPM |
| Noise | 20dBA |
| Air Volume | 48 CFM |
| Bearing | Fluid Bearing |
| Fan Life | 100000 hrs |
| Power Interface | 6pin, SATA, 5v-3pin ARGB |
| Blade Quantity | 7 |
| Power (W) | 3 |
| Used For | Case |
| Certification | CE, FCC, RoHS |
8. User Tips
- Airflow Direction: Pay attention to the fan's design to determine the airflow direction (intake or exhaust) to optimize cooling within your PC case.
- Quiet Operation: Many users report these fans are very quiet, even under load, contributing to a pleasant computing experience.
- Effective Cooling: The AR12 fans are effective at maintaining good temperatures for components like CPUs (e.g., Ryzen 5 5500).
- Remote Control Convenience: The remote control offers easy adjustment of brightness and color, providing flexibility for lighting customization.
9. Frequently Asked Questions (FAQ)
- Q: What type of connector do these fans use?
- A: The fans use a custom 6-pin connector that connects to the Aigo control box. The control box then connects to your power supply via SATA and optionally to your motherboard via a 5V-3pin ARGB header for synchronization.
- Q: Can I choose a specific color without using the controller?
- A: If your motherboard has a compatible 5V-3pin ARGB header and you connect the control box to it, you can control specific colors and effects using your motherboard's software. If you purchase a single fan without a control box, direct motherboard control is typically required, assuming the fan itself has a standard ARGB connector (which these fans do not, they rely on the hub).
- Q: How many units come in a package?
- A: The number of fans varies by product option. Common options include single fans, 3-in-1 kits (3 fans + controller), and 5-in-1 kits (5 fans + controller).
10. Warranty and Support
For warranty information and technical support, please refer to the official Aigo website or contact the seller directly. Additional item guides and documents, including a PDF user manual, may be available online.
User Manual (PDF): View PDF