1. Product Overview
The JMLI Rechargeable Digital BTE (Behind-The-Ear) Hearing Aid is designed to amplify sound, providing clearer hearing for individuals with hearing impairment. It features adjustable tone, multiple modes, and a comfortable, discreet design.

Main Components

- Microphone: Collects sound entrance.
- Volume Control (0-Min, 4-Max): Adjusts sound amplification level.
- Mode Switch (M/N): Selects different listening modes.
- ON/OFF Switch: Powers the device on or off.
- Charging Indicator: Light flashes while charging, stays on when fully charged.
- USB Socket: For charging the device.
- Ear Hook: Provides a comfortable and secure fit behind the ear.
- Sound Tube: Adjustable for left and right ear.
- Earphone: Delivers amplified sound to the ear.
- Earplug: Sits inside the ear canal, available in various sizes for optimal fit.
2. Setup and First Use
Follow these steps for initial setup and proper wearing of your JMLI Hearing Aid:

- Charge the Device: Before first use, fully charge the hearing aid. Connect the USB cable to the device's USB socket and a power source. The charging indicator light will flash while charging and remain solid when fully charged. A full charge takes approximately 2-4 hours.
- Choose the Right Earplug: Select an earplug size that fits snugly and comfortably in your ear canal. A proper fit is crucial to prevent sound leakage and howling. The device comes with five earplug options (see Figure 4).
- Adjust the Sound Tube: The sound tube is adjustable for both left and right ears. Gently bend or rotate it to achieve the correct angle for your ear.
- Set Volume to Minimum: Before placing the device in your ear, turn the volume control to the minimum setting (0). Ensure the ON/OFF switch is in the 'O' (OFF) position.
- Wear the Hearing Aid: Place the ear hook behind your ear and insert the earplug firmly into your ear canal. Ensure there are no gaps between the earplug and your ear to avoid feedback (howling).
- Power On and Adjust Volume: Once comfortably worn, turn the ON/OFF switch to the 'N' (ON) position. Slowly increase the volume using the volume control until you reach a comfortable listening level.

3. Operating Instructions
Power On/Off
- To turn ON, slide the switch to 'N'.
- To turn OFF, slide the switch to 'O'.
Volume Control
Use the '0' (Volume Control) button/dial to adjust the sound level. There are 4 levels of volume, from minimum (0) to maximum (4). Start at a low volume and gradually increase it to a comfortable level.
Mode Selection
The hearing aid features multiple modes to adapt to various listening environments. Use the 'M' (Mode) switch to cycle through the available modes.


The modes are designed for:
- Daily Communication: General use for everyday conversations.
- Indoor Communication: Optimized for indoor environments.
- Outdoor Communication: Enhanced for outdoor settings.
- Noisy Environment: Features double noise reduction for clearer sound in loud surroundings.

The double noise reduction feature utilizes a high-quality digital chip to restore real sound and accurately reduce background noise without damaging the eardrum.
4. Maintenance
Charging
To maintain optimal performance, charge your hearing aid regularly. A full charge provides approximately 35 hours of normal working time.

Cleaning
- Regularly clean the earplugs with a soft, dry cloth. If necessary, remove the earplug and wash it with mild soap and water, ensuring it is completely dry before reattaching.
- Wipe the main body of the hearing aid with a soft, dry cloth. Do not use water or cleaning solutions directly on the electronic components.
- Ensure the microphone and earphone openings are clear of debris. Use a small brush if needed.
Storage
- When not in use, store the hearing aid in a dry, cool place, away from direct sunlight and extreme temperatures.
- Turn off the device before storing it for extended periods.
5. Troubleshooting
- No Sound or Low Sound:
- Ensure the device is turned ON ('N' position).
- Check the volume control and increase it gradually.
- Verify the battery is charged. If not, charge the device for 2-4 hours.
- Inspect the earplug and sound tube for blockages or damage.
- Howling/Feedback Noise:
- This usually indicates sound leakage. Ensure the earplug is properly seated and fits snugly in your ear canal. Try a different size earplug if necessary.
- Make sure there are no gaps between the earplug and your ear.
- Lower the volume if it's too high.
- Distorted Sound:
- Check if the earplug is clean and free from wax or debris.
- Try switching to a different mode.
- Ensure the device is fully charged.
- Device Not Charging:
- Verify the USB cable and power adapter are working correctly.
- Ensure the USB cable is securely connected to both the device and the power source.
6. Specifications
| Feature | Specification |
|---|---|
| Max Sound Output | 118 ± 4dB |
| Sound Gain | ≥32dB ± 2dB |
| Total Harmonic Wave Distortion | ≤7% |
| Frequency Range | 300-4500MHz |
| Input Noise | ≤32dB |
| Voltage | d.c. 3.7V |
| Current | ≤2mA |
| Full Charging Time | Approx. 2-4 hours |
| Normal Working Time | Approx. 35 hours |
| Battery Capacity | 45mA |
| Brand | JMLI |
| Origin | China Mainland |
| Package Dimensions (L x W x H) | 13cm x 8cm x 4cm |
| Package Weight | 0.132 kg |
7. User Tips
- Universal Fit: The JMLI BTE Hearing Aid is designed to be used on either the left or right ear. The sound tube can be adjusted to fit comfortably on either side.
- Single or Pair: This product is available for purchase as a single unit or as a pair (two units). Please check your order details to confirm the quantity received.
- Intended Use: This device is a sound amplifier intended for individuals with hearing impairment. It is not designed for people with normal hearing.
- Prevent Howling: Always ensure the earplug creates a tight seal in your ear canal. If howling occurs, try a different size earplug or re-insert the device. Turning the volume down before inserting and slowly increasing it can also help.
- Battery Life: To maximize battery life, turn off the hearing aid when not in use.
8. Warranty and Support
For any issues or questions regarding your JMLI Rechargeable Digital BTE Hearing Aid, please contact the seller or manufacturer directly. Keep your purchase receipt for any warranty claims. Specific warranty terms may vary by region and seller.