Introduction
Thank you for choosing the OTHAI 500ML USB Wood Grain Aroma Diffuser. This device is designed to purify air, humidify, and provide aromatherapy with essential oils. Please read this manual carefully before use to ensure a safe and enjoyable experience.
Image: The OTHAI 500ML USB Wood Grain Aroma Diffuser, featuring a light wood grain base and a translucent white top, accompanied by its remote control.
Accessories
The product package includes the following items:
- 1 x 500ml Aroma Diffuser
- 1 x USB Cable
- 1 x User Manual (this document)
Image: A visual representation of the included accessories: the 500ml aroma diffuser, a USB cable, and the user manual.
Product Overview
Image: A diagram illustrating the main components of the aroma diffuser, including the air outlet, drainage outlet, water tank, main body, mist outlet, HIGH/LOW button, Light button, DC socket, and air intake.
Components:
- Mist Outlet: Where the mist is diffused.
- HIGH/LOW Button: Adjusts mist intensity.
- Light Button: Controls the LED light functions.
- Drainage Outlet: For draining water from the tank.
- Water Tank: Reservoir for water and essential oils.
- Mainbody: The primary unit housing the electronics.
- Air Outlet: Releases humidified air.
- DC Socket: Power input connection.
- Air Intake: Draws in air for mist production.
Setup Instructions
- Connect Power Supply: First, connect the power supply. Plug the USB cable into the DC socket on the diffuser and then into a compatible USB power source (e.g., USB wall adapter, computer USB port).
Image: A hand connecting the power cable to the DC socket on the side of the diffuser's base.
Image: A close-up of the USB cable used for powering the diffuser.
- Remove Lid: Carefully remove the top lid from the main unit.
Image: A hand lifting the top cover off the diffuser unit.
- Add Water: Pour approximately 500ml of water into the water tank. Do not exceed the maximum fill line indicated on the water tank.
Image: A measuring cup pouring water into the open water tank of the diffuser.
- Add Essential Oil: Add 3-5 drops of your preferred essential oil into the water tank.
- Replace Lid: Place the lid back onto the diffuser, ensuring it is properly seated. Position the nozzle to adjust the direction of the mist.
Image: A hand carefully placing the top cover back onto the diffuser unit.
Operation
The diffuser can be operated using the buttons on the unit or the included remote control.
Using the Unit Buttons:
- Mist Function:
- Quickly press the "Mist" button once to turn on the mist.
- Press the "Mist" button again to set the timer for 60, 180, or 360 minutes, or continuous operation (On/Int). The LED indicator will flash, with 30-second intervals between on and off for intermittent mode.
- Press the "Mist" button for 2 seconds to turn off the mist.
Image: A close-up of the diffuser's control panel, highlighting the Mist button and its associated timer settings (60, 120, 180, ON).
- Mist Intensity:
- Press the "HIGH/LOW" button to toggle between weak and strong mist.
- By default, the diffuser starts in High mist mode.
Image: A close-up of the diffuser's control panel, highlighting the HIGH/LOW button for mist intensity adjustment.
- LED Light Function:
- Quickly press the "LED LIGHT" button once to turn on the light in auto-changing mode.
- Press the "LED LIGHT" button again to cycle through and choose your favorite color.
- Press the "LED LIGHT" button for 2 seconds to turn off the light.
Image: A close-up of the diffuser's control panel, highlighting the LIGHT button for controlling the LED illumination.
Using the Remote Control:
Image: The remote control for the aroma diffuser, showing buttons for power, mist modes, mist timing, mist intensity, and light control.
- Power ON/OFF: Turns the diffuser on or off.
- Intermittent Mist: Activates mist for 10 seconds ON / 10 seconds OFF.
- Continuous Mist: Activates continuous mist.
- Set Mist Timing: Sets mist operation time (e.g., 60, 180, 360 minutes).
- High Mist/Low Mist: Toggles between high and low mist output.
- Light ON/OFF/Varied Change Color: Controls the LED light, turning it on/off or cycling through colors.
Product Demonstration Video:
Video: A short demonstration showing the setup and operation of the 500ML Wood Grain Aroma Diffuser, including adding water and essential oils, and activating mist and lights.
Maintenance
It is recommended to clean the diffuser every 2-3 days, or when changing to another flavor of essential oil. Follow these steps:
- Disconnect the diffuser from the power source and remove the top cover.
- Drain any remaining water from the "DRAIN SIDE" of the tank.
Image: A diagram indicating the "DRAIN SIDE" of the diffuser, which should be used for emptying water.
- Wipe the water tank with wet wipes or a soft cloth. For the ceramic disc, use cotton swabs to clean gently.
- Wipe out the unit and allow it to air dry completely before next use or storage.
Troubleshooting
- Problem 1: Unit cannot turn on.
- Cause: AC adapter not connected properly.
- Solution: Check the AC adapter connection.
- Problem 2: Unit turns on but auto shuts off.
- Cause: Insufficient water in the tank or TIMING button pressed for too long.
- Solution: Add water to the tank. Short press the TIMING button for desired duration.
- Problem 3: No mist or very little mist output.
- Cause: Incorrect water level (too much or too little), dirt on the ultrasonic plate, or dirt on the air suction port.
- Solution: Use a soft cloth to gently wipe the ultrasonic vibration plate and the air suction port. Adjust water to the correct level.
- Problem 4: Water leakage from the unit.
- Cause: Lid or inner cover not installed properly, too much water, or unit tipped over.
- Solution: Drain all water and dry the unit. Correctly install the cover and inner cover. Add no more than 500ml of water. If tipped, drain water, gently shake to remove water inside, and let dry for at least 24 hours.
Specifications
| Feature | Detail |
|---|---|
| Product Size | 141 x 101 mm |
| Appearance Material | PP (Polypropylene) |
| Input Voltage | AC 100~240V |
| Power Usage | 5W |
| Working Current | DC 5V |
| Water Tank Capacity | 500ML |
| Light | Colorful LED lights |
| Function | Aromatherapy, Humidification |
| Humidifying Capacity | ≤380ml/h |
| Operation Method | Remote Control |
| Coverage Area | 21-30㎡ |
| Power Type | USB |
| Humidity Control | Remote Control |
| Mist Output (gallon / day) | 1 |
| Mist Outlet Quantity | ONE |
| Timing Function | Yes |
| Water-shortage Power-off Protection | Yes |
| Noise Level | <36db |
| Humidification Method | Mist Discharge |
| Capacity | <1L |
| Voltage (V) | 5v |
| Power (W) | 5w |
| Brand Name | OTHAI |
| Origin | Mainland China |
| Power Source | USB |
User Tips
- The diffuser operates very quietly, making it suitable for use in bedrooms or quiet workspaces.
- With its 500ml capacity, the diffuser can run for an extended period, often lasting through an entire night on a single fill.
- The device is USB powered (DC 5V), offering flexible placement options as it can be connected to various USB power sources.
- No filters are needed for operation, simplifying maintenance.
- The remote control adds convenience, allowing you to adjust settings from a distance.
- Ensure to use 100% pure essential oils to prevent damage to the unit.
Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.