1. Safety Information
- Must be used under direct adult supervision.
- Self-disassembly is prohibited: Unauthorized personnel are not allowed to attempt self-repair.
- Do not use this product in humid or high temperature environments.
- Avoid direct eye exposure to the beam.
- Be sure to cut off the power supply before installation to prevent electric shock.
2. Product Introduction
This product is a high-power LED lamp bead chip with the characteristics of high brightness, low energy consumption, long life, etc., and can be applied to a variety of lighting scenarios.

3. Specifications
| Power | Size | Chip | Voltage | Electric Current | Lumen |
|---|---|---|---|---|---|
| 3W | 40MM | SMD2835 | 9-11V | 240-260mA | 60-65LM |
| 5W | 40MM | SMD2835 | 15-17V | 240-260mA | 60-65LM |
| 5W | 48MM | SMD2835 | 15-17V | 240-260mA | 60-65LM |
| 7W | 48MM | SMD2835 | 21-23V | 240-260mA | 60-65LM |
| 7W | 56MM | SMD2835 | 21-23V | 240-260mA | 60-65LM |
| 7W | 65MM | SMD2835 | 21-23V | 240-260mA | 60-65LM |
| 9W | 56MM | SMD2835 | 27-29V | 240-260mA | 60-65LM |
| 12W | 74MM | SMD2835 | 36-39V | 240-260mA | 60-65LM |
| 12W | 85MM | SMD2835 | 36-39V | 240-260mA | 60-65LM |
| 15W | 85MM | SMD2835 | 45-48V | 240-260mA | 60-65LM |
| 18W | 85MM | SMD2835 | 54-58V | 240-260mA | 60-65LM |
| 18W | 96MM | SMD2835 | 54-58V | 240-260mA | 60-65LM |
| 24W | 164MM | SMD2835 | 72-77V | 300mA | 65-70LM |
| 36W | 164MM | SMD2835 | 108-116V | 300mA | 65-70LM |
General Product Properties:
- Certification: CCC
- Origin: Mainland China
- Color Temperature Options: 3000-3500K (Warm White), 4000-4500K (Natural White), 6000-6500K (Pure White)
- Item Type: LED bulbs
- Material: Aluminum
- Application: Spotlight, LED Lamp, Downlight
- Shape: Round
- High-concerned chemical: None
4. Setup & Installation
- Preparation: First, ensure that the power supply voltage meets the product's specific requirements. Refer to the specifications table for appropriate voltage ranges for each wattage.
- Installation Work: Always make sure the connected power supply is disconnected before beginning any installation work.
- Fixed Position: Install the LED lamp beads firmly in the appropriate position within your lighting fixture.
- Use with Power: Once securely installed and connected, the LED light board can be used normally when connected to the power supply.
Connection Types:



5. Operating Instructions
Once installed and connected to the appropriate power supply, the LED light board will illuminate. Ensure the correct wattage and voltage are used as per the specifications. If your model supports different color temperatures, you can select the desired light output.

6. Maintenance
- Avoid using the product in humid or high-vibration environments to prevent damage.
- Do not operate the product in high-temperature environments for extended periods.
- Avoid frequent switching on and off to extend the service life of the product.
- Unauthorized disassembly is prohibited. The product must not be disassembled for maintenance or repair by untrained personnel.
7. Troubleshooting
| Fault Phenomenon | Possible Causes | Solutions |
|---|---|---|
| Light does not light up/flashes | The power is not connected or the contact is poor | Check the power supply and connecting cable |
| Overheating | Poor heat dissipation | Improve the ventilation conditions of the installation location |
| Uneven illumination | Improper angle of lamp beads | Adjust the angle or replace accessories |
8. User Tips
- Power Supply Compatibility: Always verify if your specific LED light board model requires an external LED driver or if it can be connected directly to your mains voltage (e.g., 220V). Refer to the voltage specifications for your chosen wattage. Incorrect power supply can damage the product.
- Heat Management: Due to the high power output, ensure adequate ventilation around the installed LED panel to prevent overheating and prolong its lifespan.
- Connection Security: For models with 'Solder plug' or 'Power Cable-Terminal' connections, ensure all wiring is secure and properly insulated to prevent electrical hazards and ensure stable operation.
9. Warranty & Support
Warranty Period: Within one year from the date of purchase, defects caused by non-human factors will be eligible for replacement or refund.
Customer Support: For any inquiries or support needs, please contact the ICYYGO brand customer service.
A detailed user manual in PDF format is available for download: User manual (PDF)