HTBCCHB BSE 110cc 125cc 140cc PIT PRO Dirt Bike

Contents

User Manual

Rear Hydraulic Brake Caliper

For BSE 110cc 125cc 140cc PIT PRO Dirt Bikes

1. Product Overview

This manual provides instructions for the installation, use, and maintenance of the HTBCCHB Rear Hydraulic Brake Caliper, designed as an aftermarket replacement/modification accessory for specific BSE 110cc, 125cc, and 140cc PIT PRO Dirt Bike models.

Key Features:

  • High-quality metal construction for durability and practical use.
  • Designed to provide reliable braking performance.
  • Specifically compatible with BSE 110cc, 125cc, and 140cc PIT PRO Dirt Bikes.

2. Safety Warnings

WARNING: Improper installation or use can lead to serious injury or death.

  • Professional Installation Recommended: Key safety system components (such as braking, suspension, transmission, timing systems) must be installed and debugged by personnel with professional maintenance experience. Individuals unfamiliar with the process are strictly prohibited from attempting installation or operation to avoid safety accidents.
  • Installation Guidelines: During installation, strictly follow specifications. Avoid violent tapping, forced installation, and any actions that may cause deformation or damage to accessories.
  • Regular Inspection: Regularly check the status of all accessories. Stop using immediately if any abnormalities are found, troubleshoot, and repair before driving. Never ride with known faults.
  • Compatibility: This accessory is designed for specific vehicle models and operating conditions. Cross-specification or cross-vehicle mixing is prohibited, otherwise it may cause accessory failure and affect vehicle safety.
  • Aftermarket Part: This product is a non-original aftermarket part and has not been certified by the vehicle manufacturer. Modified parts may affect vehicle annual inspection, emissions, or compliance with local regulations. Confirm compliance with local traffic and environmental regulations before use.
  • Post-Installation Checks: After installation, it is recommended that professional personnel conduct functional testing and safety checks to ensure that the accessory does not affect the normal operation of critical safety systems such as vehicle braking, power, and suspension.

3. Specifications

Attribute Value
Brand Name HTBCCHB
Model Compatibility For BSE 110cc 125cc 140cc PIT PRO Dirt Bike
Material Metal
Color Black
Weight 0.79 kg
Mounting Hole Diameter (Bracket) φ15mm
Mounting Hole Spacing (Caliper Body) 60mm
Mounting Bracket Length 114mm
Package Contents One (1) Rear Hydraulic Brake Caliper (as per selected option)

For detailed dimensions, please refer to the diagrams below:

Rear hydraulic brake caliper with mounting bracket dimensions: 15mm hole, 60mm and 114mm distances.
Figure 1: Brake Caliper with Mounting Bracket Dimensions
Side view of the brake caliper showing 60mm mounting distance between caliper body holes.
Figure 2: Caliper Body Mounting Hole Spacing

4. Installation and Use

Follow these steps carefully for proper installation and safe operation of your new brake caliper.

4.1. Installation Steps:

  1. Disassemble Original Components: Refer to your vehicle's maintenance manual to safely disassemble old brake components. Thoroughly clean any remaining impurities from the installation area.
  2. Install New Accessories: Align the new brake caliper with the existing installation holes. Secure it in a standardized manner, such as tightening bolts diagonally or locking them with the specified torque. Ensure the caliper is installed firmly without looseness or tilting.
  3. Connect Supporting Lines: If applicable, connect oil pipes, wires, or chains. Verify that all connections are firm, leak-free, and free from interference.
  4. Static Inspection: After installation, manually test the function of the brake caliper. This includes pinching the brake lever, rotating the wheel, and checking for any jamming, interference, or leakage.
  5. Debugging and Bleeding (if applicable): If the brake system requires bleeding (exhausting air), perform this procedure according to standard hydraulic brake system practices. If other systems (e.g., timing system) were affected, calibrate them as needed. Adjust chain tension if necessary to ensure normal function.

4.2. General Use:

Once installed and thoroughly checked by a professional, the brake caliper is ready for use. Always operate your dirt bike responsibly and adhere to all local traffic and safety regulations.

Video: Product overview and demonstration of the brake caliper.

5. Maintenance and Troubleshooting

5.1. Maintenance:

  • Regularly inspect the brake caliper for any signs of wear, damage, or leaks.
  • Ensure all mounting bolts are securely tightened.
  • Check brake fluid levels and quality periodically. Replace brake fluid according to your vehicle's maintenance schedule.
  • Keep the caliper and surrounding area clean from dirt and debris.

5.2. Troubleshooting:

  • Reduced Braking Performance: Check for air in the hydraulic system (bleed if necessary), worn brake pads, or brake fluid leaks.
  • Squealing/Grinding Noise: Inspect brake pads for wear or contamination. Ensure the caliper is properly aligned.
  • Brake Lever Feels Spongy: This often indicates air in the hydraulic lines. Bleed the brake system.
  • Brake Dragging: Check for seized caliper pistons or improper adjustment.

For any complex issues, consult a professional mechanic.

6. User Tips

  • Ensure to verify the hydraulic hose screw diameter for compatibility before installation.
  • Always double-check compatibility with your specific dirt bike model and year (e.g., Ability 125 4-stroke 2010) to ensure a perfect fit and function.
  • Consider professional installation for critical safety components like brake calipers to ensure optimal performance and safety.

7. Manufacturer Information

Manufacturer: Yongkang Hongtian Trading Co., Ltd.
Changcheng Village, Yongkang Economic Development Zone, Jinhua City, Zhejiang Province, Room 302, 3rd Floor, No. 66 Jinbi Road

EU Authorized Representative: MJCM SARL
78 avenue des Champs Elysees Bureau 326

For further details, a comprehensive user manual in PDF format is available: View User Manual (PDF)

8. Warranty and Support

This product is covered by the standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims.

For technical support or warranty inquiries, please contact the seller or manufacturer directly using the contact information provided with your purchase or in the manufacturer information section.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.