1. Introduction
The COOSPO CS300 is a wireless GPS bicycle computer designed to provide cyclists with comprehensive data for an enhanced riding experience. Featuring a 2.6-inch large anti-glare screen, it offers clear and intuitive data display. The device supports wireless connectivity via Bluetooth 5.0 and ANT+ to various cycling sensors, including heart rate monitors, speed sensors, cadence sensors, and power meters. With fast and accurate positioning using GPS, BDS, and QZSS multiple satellites, the CS300 ensures reliable tracking. It also includes smart functions like auto backlight, auto sleep, auto pause, and customizable data pages, all powered by a super long-lasting 1000mAh battery providing up to 40 hours of usage.
Video: COOSPO CS300 Product Overview. This video demonstrates the bicycle computer's features, including its clear display, wireless sensor connectivity, GPS accuracy, and app synchronization capabilities during a cycling activity.
2. Product Accessories
The following items are included in your COOSPO CS300 package:
- COOSPO CS300 Bicycle Computer
- USB Charging Cable
- Bicycle Mount
- Rubber Bands for Mount Installation
- Lanyard
- User Manual (this document)
Image: Contents of the COOSPO CS300 package, showing the device, charging cable, mount, rubber bands, and lanyard.
3. Charging
Before first use, please fully charge the device. Connect the provided USB cable to the Type-C charging interface on the CS300 and plug the other end into a DC 5V power adapter or a computer USB port.
Image: Diagram illustrating how to charge the COOSPO CS300 using the USB Type-C cable and a DC 5V power source.
The device features a 1000mAh battery, providing approximately 40 hours of usage on a full charge.
4. How to Install
Follow these steps to install your COOSPO CS300 on your bicycle:
- Place the bicycle mount on your handlebar or stem.
- Secure the mount using the provided rubber bands, ensuring it is tight and stable.
- Align the CS300 with the mount, placing it slightly counter-clockwise.
- Rotate the CS300 clockwise until it clicks securely into place.
Image: Step-by-step diagram showing the installation of the COOSPO CS300 bicycle computer onto a bike mount.
6. Icons Glossary
Understand the various icons displayed on your CS300 screen:
| Icon | Description |
|---|---|
| 📶 | GPS signal on |
| 📶 (empty bars) | No GPS signal |
| 📶 (crossed out) | GPS off, no signal |
| 🔋 | Battery indicator |
| ▶ | Start/Ride |
| ⏸ | Stop |
| AUTO | Auto-Pause |
| 🚲 (indoor) | Indoor Ride |
| Ⓘ | Bluetooth Connection with App |
| ((())) | Speed sensor connected |
| ❤ | Heart Rate Monitor |
| ☑ | Speed Sensor |
| ⚙ | Cadence Sensor |
| ⚡ (3S) | Power (3-second average) |
| ODO | Odometer |
| DST | Distance |
| AST | Ascent |
| GRA | Gradient |
| CAL | Calorie |
| LAP | Lap |
| ⚡ | Power Meter |
| UTC | Time zone |
| ALT | Altitude |
| C°F | Temperature (may vary from actual environment) |
| ▲ | Speed above average |
| ▼ | Speed below average |
7. Data Pages and Dynamic Zone Chart
The CS300 offers customizable data pages to display the information most relevant to your ride. You can switch between different pages using the right button (Button 3).
7.1 Customizable Pages
The device comes with several pre-configured data pages, and you can customize them further via the CoospoRide APP:
- Page 1: Speed, Time, Distance, Gradient, Altitude
- Page 2: Speed, Power, Cadence, Heart Rate, Ascent
- Page 3: Average Speed, Time, Average Altitude, Average Gradient, Distance
- Page 4: Max Speed, Time, Calories, Temperature, Distance
- Page 5: Speed, Time, Distance, Gradient, Odometer (closed by default, enable in CoospoRide APP)
To customize page data, use the CoospoRide APP: Go to CoospoRide > Devices > CS300 > ALL Settings > My Stats.
Image: Example of the COOSPO CS300 display showing various data fields like LAP, Speed (km/h), M:S (time), DST (distance), GRA% (gradient), and ALT (altitude.
7.2 Dynamic Zone Chart
The Dynamic Zone Chart provides a visual representation of your current performance zone. This helps you understand your intensity level at a glance.
Image: The COOSPO CS300 display showing the dynamic zone chart, indicating current speed (25.6 km/h) within a specific zone. The chart illustrates 7 zones for Heart Rate/Speed/Cadence and a Power Zone.
For example, if your current speed is 25.6 km/h, you might be in Zone 3 of speed. You can set speed, cadence, heart rate, and power zones within the CoospoRide APP: Go to CoospoRide > Devices > CS300 > ALL Settings > My Stats.
8. Device Settings
To access device settings, long press the right button (Button 3) for 2 seconds. The setting page will blink to indicate it's active. Short press Button 3 to switch between setting pages (P1-P5). Short press Button 2 to enter the current setting. Settings are automatically saved and exited after 10 seconds of no button operation.
8.1 Add Sensor (P1)
The CS300 automatically recognizes and adds compatible sensors. When searching, sensor icons and data will flash. Once connected, icons and data will remain steady. Short press Button 1 to save and return.
Note: Check sensor compatibility at www.coospo.com/faq.
To add sensors via the app: Open CoospoRide > Devices > CS300 > Add Sensor.
8.2 Time Zone (P2)
Short press Button 3 to add time zones. Short press Button 2 to confirm the current digit and move to the next digit. Short press Button 1 to save and return.
8.3 Wheel Size (P3)
Short press Button 3 to add values for wheel size. Short press Button 2 to confirm the current digit and move to the next digit. Short press Button 1 to save and return.
Refer to the table below for common wheel sizes and their circumferences:
| Wheel Size | Circumference (mm) | Wheel Size | Circumference (mm) | Wheel Size | Circumference (mm) |
|---|---|---|---|---|---|
| 12 x 1.75 | 935 | 24 x 2.00 | 1925 | 26 x 1.40 | 2005 |
| 14 x 1.5 | 1020 | 24 x 2.125 | 1965 | 26 x 1.50 | 2010 |
| 14 x 1.75 | 1055 | 26 x 1.75 | 2023 | 27 x 1 | 2145 |
| 16 x 1.5 | 1185 | 26 x 1.95 | 2050 | 27 x 1-1/8 | 2155 |
| 16 x 1.75 | 1195 | 26 x 2.00 | 2055 | 27 x 1-1/4 | 2161 |
| 18 x 1.5 | 1340 | 26 x 2.10 | 2068 | 27 x 1-3/8 | 2169 |
| 18 x 1.75 | 1350 | 26 x 2.125 | 2070 | 27.5 x 1.75 | 2114 |
| 20 x 1.75 | 1515 | 26 x 2.35 | 2083 | 27.5 x 2.125 | 2174 |
| 20 x 1-3/8 | 1615 | 26 x 3.00 | 2170 | 27.5 x 1.5 | 2074 |
| 22 x 1-3/8 | 1770 | 26 x 7/8 | 1920 | 27.5 x 1.95 | 2146 |
| 22 x 1-1/2 | 1785 | 26 x 1 (59) | 1913 | 29 x 2.1 | 2288 |
| 24 x 1 | 1753 | 26 x 1 (65) | 1952 | 29 x 2.2 | 2298 |
| 24 x 3/4 Tubular | 1785 | 26 x 1.25 | 1953 | 29 x 2.3 | 2326 |
| 24 x 1-1/8 | 1795 | 26 x 1-1/8 | 1970 | 650 x 35A | 2090 |
| 24 x 1-1/4 | 1905 | 26 x 1-3/8 | 2068 | 650 x 38A | 2125 |
| 24 x 1.75 | 1890 | 26 x 1-1/2 | 2100 | 650 x 38B | 2105 |
| 700 x 18C | 2070 | 700 x 19C | 2080 | 700 x 20C | 2086 |
| 700 x 23C | 2096 | 700 x 25C | 2105 | 700 x 28C | 2136 |
| 700 x 30C | 2170 | 700 x 32C | 2155 | 700C Tubular | 2130 |
| 700 x 35C | 2168 | 700 x 38C | 2180 | 700 x 40C | 2200 |
| 700 x 42C | 2224 | 700 x 44C | 2235 | 700 x 45C | 2242 |
| 700 x 47C | 2268 |
8.4 Unit Settings (P4)
Short press Button 3 to enter unit settings. Short press Button 2 to switch between metric and imperial units. Short press Button 1 to save and return.
8.5 Power Calibration (P5)
Short press Button 3 to enter power calibration. Short press Button 2 to calibrate the power sensor. Short press Button 1 to save and return.
9. Ride Functions
9.1 GPS Positioning
For initial satellite positioning, wait 30-90 seconds in an open outdoor area. The device's date and time will set automatically upon successful positioning. For the best signal, keep the bike computer stationary while it acquires GPS.
9.2 Start a Ride
Short press Button 2. After a 3-2-1 countdown on the data page, your ride will begin with the start icon displayed.
9.3 Lap Function
During a ride, short press Button 1 to mark a lap. The lap information will display for 10 seconds. Any button press will cancel the lap display.
9.4 Pause/Auto-Pause
Short press Button 2 to pause the ride. Press Button 2 again to resume. If auto-pause is enabled, the ride will automatically pause when you stop moving or when your speed drops below a set value. This prevents unwanted data recording during stops or breaks.
9.5 Save Ride Data
Long press Button 2 to save your current ride data.
9.6 Check Data
After saving a ride, short press Button 3 to switch between pages and review the data from your last ride. For more detailed activity data, check the CoospoRide APP.
10. Connect to CoospoRide APP
The CoospoRide APP allows you to manage your device, customize settings, and view detailed ride data. Follow these steps to connect:
- Do NOT pair the bike computer directly via your phone's Bluetooth settings.
- Download the CoospoRide APP from the Apple App Store or Google Play.
- Enable Bluetooth and location permissions for the CoospoRide APP on your phone.
- Open the CoospoRide APP, navigate to "Bike Computer" > "Add Device" > "CS300".
- Click on the Device ID displayed in the app to connect your bike computer.
Important: Ensure that Bluetooth and location permissions are enabled for the app before connecting. Some phone models may not be able to search for Bluetooth devices without proper authorization.
11. Specifications
| Feature | Specification |
|---|---|
| Brand Name | COOSPO |
| Model Number | CS300 |
| Type | Wireless Stopwatch |
| Display Size | 2.6 inches |
| Display Color | Black and White |
| Touch Screen | No |
| Navigation | No |
| Waterproof Level | IPX7 |
| Charging Interface Type | Type-C |
| Automatic Sleep | Yes |
| Auto-Pause | Yes |
| External Devices Support | Yes (Bluetooth, ANT+ cycling sensors) |
| Language | English |
| Origin | Mainland China |
| Package Weight | 0.175 kg |
| Package Dimensions | 20cm x 13cm x 3cm |
12. Troubleshooting
- Device not turning on: Ensure the device is fully charged. Connect it to a power source and try again.
- No GPS signal: Move to an open outdoor area away from tall buildings or dense tree cover. Keep the device stationary during initial acquisition.
- Sensors not connecting:
- Ensure sensors are active and have fresh batteries.
- Check that Bluetooth and ANT+ are enabled on the CS300.
- Verify sensor compatibility at www.coospo.com/faq.
- Try re-adding the sensor via the CoospoRide APP.
- Data not syncing with app:
- Ensure Bluetooth and location permissions are enabled for the CoospoRide APP on your phone.
- Do not pair the device directly through your phone's Bluetooth settings; connect only via the CoospoRide APP.
- Ensure the device is within Bluetooth range of your phone.
- Inaccurate speed/distance: Ensure your wheel size is correctly set in the device settings (P3).
13. User Tips
- Initial Setup: Always charge your CS300 fully before its first use to ensure optimal performance and battery calibration.
- Check Package Contents: Upon receiving your CS300, carefully check all included accessories against the "Product Accessories" section to ensure everything is present.
- App Connection Best Practice: Remember to connect your CS300 to the CoospoRide app directly from within the app, not through your phone's general Bluetooth settings. This ensures proper data synchronization and feature access.
- Outdoor GPS Acquisition: For the quickest and most accurate GPS lock, perform the initial GPS positioning in an open outdoor area, keeping the device stationary.
14. Warranty and Support
The information contained in this manual is for reference only. The product described above may be subject to alteration owing to the manufacturer's continuing research and development plans without prior notice.
We shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.
If the product is operating improperly, please contact COOSPO support. Product must be returned to the manufacturer for any service or repair.
Contact Information:
- Website: www.coospo.com
- E-mail: support@coospo.com
For additional information, you may also refer to the official user manual PDF: COOSPO CS300 User Manual (PDF).
15. Regulatory Information
15.1 FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.2 IC Warning (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
- L'appareil ne doit pas produire de brouillage;
- L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Environmental Protection: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.